Welder III

Smiths Group•Tulsa, OK

About The Position

The Welder III prepares, positions, aligns, and joins metal structural shapes using MIG, TIG, and Spray Arc welding procedures. The role produces ASME Section IX, x-ray-certified welds and completes fit-up and welding according to specified procedures and documentation. The welder reviews drawings and verifies that required materials are available and conform to the drawings and documentation. They record Material Test Records (MTRs) on drawings, coordinate drawing issues and material requisitions with the Welding Lead/Supervisor, and complete required fit-up and welding. After welding, they remove rough edges, surplus weld, and scale; clean assemblies; and conduct visual inspections before review by the Welding Lead/Supervisor or Authorized Inspector. The position also requires observing weld inspection hold points, recording labor time accurately, and meeting established productivity standards.

Requirements

  • High school graduate or GED and two years of related experience and/or training, or an equivalent combination of education and experience.
  • Ability to work flexible hours, including weekends as needed to meet business demands.
  • Ability to complete tasks in a timely and efficient manner.
  • Ability to manage multiple priorities in a high-stress environment.
  • Ability to read and comprehend simple instructions, short correspondence, and memos; write simple correspondence; and present information effectively in one-on-one and small-group situations.
  • Ability to perform basic arithmetic, including adding and subtracting two-digit numbers and multiplying and dividing with 10s and 100s.
  • Ability to apply common-sense understanding to written, oral, or diagram-based instructions and address problems involving several concrete variables in standardized situations.
  • ASME Section IX x-ray-quality welding capability.
  • Ability to perform data entry for extended periods throughout the day.
  • Ability to frequently lift or move up to 25 pounds and occasionally lift or move up to 50 pounds.

Responsibilities

  • Prepare, position, align, fit up, and join metal structural shapes using MIG, TIG, and Spray Arc procedures and identified weld procedures.
  • Produce ASME Section IX, x-ray-quality welds.
  • Review drawings and verify that required materials are available and conform to the drawings and documentation.
  • Identify drawing problems and coordinate resolutions with the Welding Lead/Supervisor.
  • Request welding materials through the Welding Lead/Supervisor.
  • Record Material Test Records (MTRs) on drawings and manufacture accordingly.
  • Grind or chip rough edges, surplus weld, and scale after welding.
  • Clean assemblies with a wire buffer or sander as needed.
  • Perform visual inspections before inspection by the Welding Lead/Supervisor or Authorized Inspector.
  • Follow weld inspection hold-point requirements.
  • Accurately record labor times and maintain productivity in accordance with company standards.
  • Perform other duties as required.

Benefits

  • Competitive compensation and benefits
  • Employee resource groups
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service