Transmission Line Mechanic C-A

American Electric Power•Pikeville, KY

22h•Onsite

About The Position

This role involves performing all types of work related to the installation, maintenance, operation, removal, and inspection of energized and de-energized transmission and distribution facilities. The selected candidate will need to reside within 45 minutes of the Pikeville Transmission Service Center. The position progresses through C, B, and A levels, with increasing responsibilities and required experience. The company, AEP, is an energy company focused on delivering safe, reliable, and innovative energy solutions while prioritizing customer needs and reducing its carbon footprint. They are looking to build the grid of the future and foster a supportive, inclusive work culture.

Requirements

High school graduate or GED
Minimum of one year transmission electrical power line work experience, OR one year of related line experience defined as: successful completion of a one year electrical power line school certificate plus a minimum of 16 weeks internship or transmission electrical power line experience, or an Associate degree from an electrical power line school which includes a minimum of 16 weeks internship or transmission electrical power line experience.
Valid Class A CDL is required
Physical demands required for this job include but not limited to: Minimum Requirement Line Mechanic Amount of Weight Lifted from Floor/Ground to Waist Level - 75 Amount of Weight to be Carried for 20 Feet - 60 Amount of Weight Lifted to Chest Level 50Amount of Weight Lifted to Eye Level - 30Distance to Walk Accumulated over the Course of an 8-Hour Shift - 2 Miles Distance in Feet to Climb and Work on a Ladder/Structure - 100 and Higher Distance in Feet to Ascend to and Work in a Bucket/Lift - 150 and Higher (Tested at 60’)Ability to Discriminate between Colors Yes (Not Tested)
Minimum of 24 months satisfactory work experience as a Transmission Line Mechanic C or the equivalent ( as determined by the Company through demonstration, examination and performance appraisal).
Must be available to work overtime, call-out overtime and shift work, as required.
Travel requirements are expected > 50 % of the time
A physical abilities assessment is also required for this position.
Shall have performed the duties of and have all the qualifications of Transmission Line Mechanic C and 24 months of on the job experience or the equivalent.
Equivalent experience is determined at the time of the assessment and appropriate time step credit will be given.
Shall qualify through demonstration, examination and/or performance appraisal as determined by the Company.
Must demonstrate the ability and desire to acquire the necessary knowledge and skills to perform the duties and/or responsibilities of the key job (Transmission Line Mechanic A) in this job family.
Must acquire within such time frame as determined by the Company, the qualifications necessary to perform the duties of the next higher classification in the line of progression, or vacate the current job classification.
Must be familiar with line circuits and other voltages.
Must be familiar with circuit switching procedures.
Must possess and maintain a valid commercial driver's license.
Must meet all vehicle operation requirements as designated by federal and/or state law.
Must have a good working knowledge of the tools, materials and equipment used.
Must possess the ability to deal with employees, customers and the general public in a courteous and proper manner.
Considerable travel and overtime may be required with this position.
Occasionally lift up to 100 pounds, frequently lift up to 50 pounds
Physical demands required for this job include but not limited to; Amount of Weight Lifted from Floor/Ground to Waist Level - 75Amount of Weight to be Carried for 20 Feet - 60Amount of Weight Lifted to Chest Level - 50Amount of Weight Lifted to Eye Level - 30Distance to Walk Accumulated over the Course of an 8-Hour Shift - 2 MilesDistance in Feet to Climb and Work on a Ladder/Structure - 100 and HigherDistance in Feet to Ascend to and Work in a Bucket/Lift - 150 and Higher (Tested at 60’)Ability to Discriminate between Colors - Yes (Not Tested)
Minimum of 24 months satisfactory work experience as a Transmission Line Mechanic B or the equivalent ( as determined by the Company through demonstration, examination and performance appraisal).
Shall have performed the duties of and have all the qualifications of a Transmission Line Mechanic B and 24 months of on the job experience or the equivalent.
Must have a good working knowledge of Company safety rules and practices and be proficient in the application of resuscitation and first aid.
Must have good working knowledge of the transmission circuitry within the area of responsibility.
Must have a good working knowledge of the Company's transmission and distribution standards.
Must successfully complete Physical Abilities Test (PAT)

Nice To Haves

Reside within 45 mins of the Pikeville Transmission Service Center (6809 North Mayo Trail Pikeville, KY 41501)

Responsibilities

Perform all types of work involved in the installation, maintenance, operation, removal and inspection of energized and de-energized transmission and distribution facilities.
Install, maintain and repair overhead lines.
Dig holes for poles, towers and anchors.
Set poles, tower below-ground components, and guy anchorages.
Replace or stub poles, dead or energized.
Make up and install guys.
Assemble tower components on the ground and in the air.
Frame pole structures on the ground and in the air.
Perform all right-of-way control procedures in use of transmission lines.
Use proper hand signals for line work as required.
Use proper hand signals for line work as required.
Assist in the use of live line tools, bare-hand techniques, rubber gloves and sleeves, and other accepted work methods to maintain transmission lines.
Perform climbing maintenance on all transmission structures, except on cross-arms carrying energized conductors.
Make up conductor and shield wire splices, dead-ends and terminals.
Identify conductor types and sizes.
Set up reels for conductor installation.
Install conductors and shield wires.
Maintain tools, equipment and work area in a clean and orderly fashion.
Assist employees of equal or higher classification.
Attend and participate in training as assigned and assist in the training of other employees.
Perform similar or less skilled work.
Maintain records and submit reports as required.
Properly prepare right-of-way items on field drawings.
Operate automotive equipment and its associated equipment as authorized and directed by supervision.
Operate truck-mounted lifting/pulling devices.
Load and unload poles, steel and other materials.
Perform all maintenance work on wood structures including the use of insulating protective equipment and live line tools.
Establish proper elevation relationships on all new transmission structures.
Identify pole species and structure configuration types of transmission structures.
Calculate tool, structure and angle loadings.
Layout, install, block and backfill all transmission anchorages.
Assist qualified personnel in work on congested energized circuits.
Test for de-energized circuits and install ground for working circuits dead.
Be proficient in the use of live line tools, bare-hand techniques, rubber gloves and sleeves, and other accepted work methods.
Select the proper standard drawings and follow specifications and prints for each part of the job as laid out by Engineering.
Read and interpret plan, profile and specification drawings.
Identify and be able to patrol transmission lines, locate, evaluate, report and repair transmission facilities.
Operate automotive equipment and its associated equipment, and perform duties incidental to the operation of such equipment.
Assist in loading and unloading carloads of poles, truck and rail.
Prepare, conduct and facilitate safety meetings.
Perform all live line work without constant supervision.
Select and use proper live line tools.
Handle, cover or barricade underlying primary or transmission circuits.
Perform structure replacement with the associated circuitry energized.
Install, inspect, remove or maintain transmission lines, distribution lines, communication lines and equipment, and climb or by other means perform work on poles, towers and structures, energized or de-energized.
Use transits and other leveling tools to the degree necessary in transmission construction/maintenance work.
Read and interpret all drawings related to transmission circuits.
Install, splice, sag, terminate or remove transmission, distribution and communications related conductors, cables and wires.
Install, remove and maintain all types of line equipment and hardware on transmission lines and structures.
Identify, request, accept and return line clearances.
Direct loading and unloading carloads of poles, truck and rail.
Be proficient in the application of resuscitation and first aid.
Have good working knowledge of the transmission circuitry within the area of responsibility.
Meet all vehicle operation requirements as designated by federal and/or state law.
Have a good working knowledge of the Company's transmission and distribution standards.