Test Station Engineer, Microwave

Assured Space•Irvine, CA
•$130,000 - $175,000•Onsite

About The Position

Assured Space Access Technologies, Inc. is a defense and engineering firm delivering phased array, radar, RF payload, and secure communications solutions to government and prime contractor customers. The company is headquartered in Irvine, California. This role is part of the Test Stations group within the Ground Based Radar transmit/receive module team, which builds stations to qualify each module from first article through production. As the Microwave Test Station Engineer, you will design, build, and own automated RF test stations used to measure transmit/receive modules. You will ensure measurements of gain, phase, noise figure, output power, and match across operating states are accurate, repeatable, fast, and traceable to each module’s serial number. As the first hire in the test stations group, you will establish the station architecture, data format, and automation framework that Power and Mechanical test station engineers will build on. This is an on-site, hands-on laboratory role for a mid-level to senior engineer with end-to-end microwave test station ownership experience, from requirements and instruments through fixtures, automation, calibration, and production handoff. The position is full-time and exempt, based on-site in Irvine, California, with a base salary range of $130,000 to $175,000 per year. The role requires the ability to obtain and maintain a U.S. Secret clearance, which requires U.S. citizenship; an active clearance is preferred. Employment is contingent on satisfactory completion of a background check and verification of identity and employment eligibility. Access to export-controlled technical data requires U.S. citizenship and the ability to obtain and maintain the required security clearance.

Requirements

  • Bachelor’s degree in Electrical Engineering or a closely related discipline.
  • At least 5 years of hands-on RF/microwave test engineering experience, including ownership of at least one automated production or characterization test station from requirements through production use.
  • Expertise using vector network analyzers, spectrum and signal analyzers, power meters, and noise figure measurement, including calibration and de-embedding.
  • Experience testing amplifiers, transmit/receive modules, or other active microwave assemblies under pulsed and continuous-wave conditions.
  • Proficiency automating instruments using SCPI and VISA in Python, LabVIEW, or MATLAB.
  • Working knowledge of measurement uncertainty, fixture design, and repeatability studies.
  • Ability to obtain and maintain a U.S. Secret clearance; U.S. citizenship is required.
  • Ability to work on site in Irvine, California.

Nice To Haves

  • Experience testing phased array or AESA transmit/receive modules, including multi-channel gain and phase calibration.
  • Experience with high-power pulsed RF testing and associated safety practices.
  • Experience with NI TestStand, OpenHTF, or a similar test executive and a test results database.
  • Experience transferring test stations to contract manufacturers or suppliers.
  • Production test experience at a defense prime or RF component manufacturer.
  • Active Secret or higher security clearance.

Responsibilities

  • Define module acceptance and characterization test requirements with module design and systems engineers, including S-parameters, gain and phase versus state, noise figure, output power and compression, efficiency, spurious emissions, and transmit/receive switching behavior.
  • Architect pulsed and continuous-wave RF test stations using vector network analyzers, signal and spectrum analyzers, power meters, noise figure sources, switch matrices, and DC power and control, including module power sequencing and protection.
  • Design and procure RF fixtures, interface boards, cabling, and calibration standards with repeatability, de-embedding, and throughput in mind.
  • Set the common station architecture, data format, and instrument control framework for the Power and Mechanical test stations.
  • Develop automated test sequences in Python, LabVIEW, or TestStand to control instruments and the module’s digital control interface, apply limits, and log traceable results by serial number.
  • Build calibration and verification procedures, golden-unit correlation, and measurement uncertainty and gauge repeatability studies to support transfer of results between stations and suppliers.
  • Set up the module test database and reports for yield, drift, and failure trends in collaboration with the test automation engineer.
  • Write test procedures, operator work instructions, and troubleshooting guides that production technicians can execute independently, and train technicians to operate the stations.
  • Lead module RF testing during first article builds and support test readiness reviews.
  • Diagnose module failures with design engineers and suppliers and drive corrective action into the design, build, or test station.
  • Correlate test results with outside suppliers of module components and subassemblies.

Benefits

  • Medical coverage
  • Dental coverage
  • Vision coverage
  • 401(k) with company matching
  • Paid time off
  • Professional development support, including relevant training and certifications
  • Relocation assistance considered case by case
  • Hands-on ownership of meaningful work in a growing defense technology company
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service