Technical Services Representative

Sherwin-Williams•Portland, OR
•Onsite

About The Position

The Technical Services Representative provides technical support and coating inspection services for marine coating work, including Military Sealift Command vessel availabilities. The role supports coating operations from surface cleaning and preparation through application, curing, and final acceptance inspection, as directed by the Port Engineer. The representative monitors work for compliance with specifications and manufacturer requirements, documents inspection results and conditions, prepares contract deliverables, and communicates deficiencies to the Port Engineer and Contracting Officer Representative. The position requires extensive domestic travel to vessel availabilities, service calls, shipyards, ports, military installations, and other assigned facilities. Availability periods are typically 60 to 90 days, and the representative must be available for the full duration of an assigned availability. Full-time on-site presence is required during availabilities, with schedule flexibility for work outside normal business hours when project operations require it. The role involves work in active marine industrial settings, including vessels, shipyards, drydocks, tanks, machinery spaces, decks, and piers. The representative must use appropriate inspection instruments and personal protective equipment, prepare detailed reports and photographic records, manage paint inventories, and provide shipboard coating training and service calls. Continued employment depends on obtaining and maintaining the Government, military, vessel, port, shipyard, and facility access credentials needed to perform assigned duties. The position is U.S. mainland/CONUS-based and does not include international travel.

Requirements

  • Must be at least 18 years of age.
  • Must be legally authorized to work in the country of employment without requiring employment-visa sponsorship now or in the future.
  • High school diploma or GED required.
  • Must be able to tolerate non-toxic paint odors and wear a respirator as required.
  • Valid, unrestricted driver's license required.
  • Ability to operate a computer and communicate via telephone.
  • Ability to travel at least 50% of the time and support assigned availabilities for their full duration.
  • At least four years of prior marine coatings application experience through shipyard paint shop work, employment with a marine paint application company normally contracted for ship coating work, or technical representative experience for a marine paint manufacturer.
  • Must possess a coating-inspection certification that satisfies the contract's FSTR staffing requirements. Recognized certifications include AMPP Level II Certified Coating Inspector; ACQPA/FROSIO Inspector, Red Card; NACE Level I; or ACQPA/FROSIO Inspector, Blue Card.
  • Must be capable of obtaining and maintaining credentials and authorizations needed to work at Department of Defense installations, military and Navy bases, MSC vessels, commercial and Government shipyards, ports and waterfront facilities, and other controlled Government or industrial facilities.
  • Must provide personnel information for applicable security checks and facility-access processing and be capable of obtaining unescorted vessel access when required.
  • Must be capable of obtaining and maintaining DBIDS credentials where required, and meet applicable vehicle-access requirements for Navy and other controlled facilities when vehicle access is needed.
  • Must maintain required Government, military, vessel, port, shipyard, and facility-specific access credentials; inability to do so may prevent performance of essential job functions and continued employment.
  • Must be capable of performing technical inspection work in active marine industrial environments and safely using required inspection instruments and appropriate personal protective equipment.
  • Must have schedule flexibility to support shipyard production and coating operations outside normal business hours when required.

Nice To Haves

  • AMPP CIP Level II or Level III certification.
  • Previous Military Sealift Command or U.S. Navy vessel experience.
  • Government or major commercial shipyard experience.
  • Drydock availability experience.
  • Experience inspecting underwater hull coating systems.
  • Tank and confined-space coating inspection experience.
  • Deck and nonskid coating experience.
  • Working knowledge of ASTM, AMPP/NACE, SSPC, MIL-PRF, and marine coating manufacturer requirements.
  • Strong technical-report writing and photographic documentation skills.

Responsibilities

  • Provide full-time on-site technical support to the MSC Port Engineer during assigned vessel availabilities and critical coating operations.
  • Be present for paint-related work, from initial surface cleaning and preparation through coating application, curing, and final acceptance inspection, as directed by the Port Engineer.
  • Monitor and document surface cleaning and preparation, environmental conditions, application techniques, coating-system requirements, manufacturer technical requirements, and compliance with work specifications.
  • Inspect surface preparation and each coating layer to verify conformity with specifications and manufacturer-published technical data.
  • Measure and document ambient, substrate, and dew-point temperatures; relative humidity; surface profile; paint application and consumption; product identification and batch numbers; color; wet film thickness; spray-reduction paint/thinner ratio; and dry film thickness.
  • Obtain two dry film thickness readings per 10 square meters for each coat, as required.
  • Prepare Daily Paint Progress Reports (CDRL-015.01) covering inspection results, environmental conditions, application, material consumption, deficiencies, and other required information; coordinate daily review and signature by the FSTR and Port Engineer.
  • Immediately notify the Port Engineer and Contracting Officer Representative of deficiencies that could void the General Warranty or cause significant problems; provide written notification within 24 hours and document deficiencies in applicable reports.
  • Take required progress photographs during drydock, including before and after high-pressure water washing, after surface preparation, and after painting; document unusual conditions and serious deficiencies with additional photographs.
  • Conduct coating condition surveys as directed, including surveys of topsides and superstructure, tanks and voids, underwater hull and boottop, deck machinery, and other designated areas; prepare reports in accordance with ASTM F 1130-99 (2014), including recommendations and representative photographs.
  • Maintain daily inventories of paints and thinners delivered to and applied by the facility or subcontractors, perform additional inventories when requested, and identify potential shortages at least 10 calendar days before anticipated need dates by reviewing production schedules.
  • Within 24 hours after painting is complete, inventory remaining unopened paints, solvents, and other applicable products; prepare the Final Job Inventory Report and arrange removal of unused and unopened materials within 24 hours after inventory.
  • Monitor and document exterior spray loss exceeding 40%, unnecessary paint waste, reasons for excessive loss, conservation of remaining usable coating material, and related discussions with the Port Engineer and shipyard personnel.
  • Provide or update Paint Handbook materials; deliver shipboard coating training; review onboard coating inventories and six-month paint supply; identify expired materials; discuss coating concerns with vessel personnel; and complete the Service Call Report.
  • Prepare or support preparation of applicable contract deliverables, including daily progress, hull condition, surface preparation, application data, exception, photographic, coating inspection, final inventory, antifouling certificate, flight deck resurfacing, service call, final availability, and square footage tracker documentation.
  • Use inspection instruments and equipment necessary for assigned duties and industry-recognized visual guides for power-tool cleaning, abrasive-blast cleaning, UHP water-jetting, surface preparation standards, and coating failure types, causes, and remedies.
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service