Surveyor

Clark Construction Group, LLC • Dallas, TX

1d • Onsite

About The Position

As a Field Engineer, you will be responsible for managing technical functions, testing equipment, handling repairs, managing engineering projects, and conducting site inspections. You will also engage with clients, ensure compliance, conduct feasibility studies, and apply technical knowledge to practical problems. Join us in building the future! If you are ready for a challenging yet rewarding career in construction, we encourage you to apply. The work environment and requirements described below are representative of those necessary for an employee to successfully perform the essential functions of this role.

Requirements

• Able to make temperature corrections when chaining
• Have a basic ability to read and understand Structural / Architectural / Shop Drawings
• Be able to provide layout from drawings without assistance
• Be able to coordinate between drawings and discern potential conflicts
• Be proficient in the use of scales
• Be able to layout footings, columns, and building lines with no assistance
• Be able to establish vertical dimensions from given finish floor elevations
• Be able to compute concrete quantities for daily pours, slabs, columns, etc.
• Be able to conduct fine grading operations
• Be able to level deck with no assistance
• Be able to grade columns with no assistance
• Be able to establish secondary benchmarks
• Be able to establish secondary horizontal and vertical control, i.e. column lines, offsets
• Be able to compute and track concrete during pour
• Proficient in simple math, geometry, and trigonometry
• Able to figure deflection angles and solve curves
• Proficient in the computation of rectangular and polar coordinates
• Be proficient with Data Collection software
• Introduction to AutoCAD
• Knowledge of everything required of an Apprentice
• Must be able to work safely around heavy equipment and construction traffic
• Must be able to frequently lift, carry, and move materials weighing up to 50 pounds alone, and use team-lifting techniques for anything heavier
• Long periods of continual standing or walking are required, along with the ability to bend, climb, kneel, and reach
• Good balance and dexterity are crucial, as you will be working safely at various heights and in tight spaces
• Need visual acuity to operate equipment and spot hazards
• Ability to hear with or without assistance to understand instructions in noisy environments
• Will be required to consistently wear all necessary Personal Protective Equipment (PPE) and strictly follow Clark Construction's safety policies and procedures, and all applicable laws, at all locations
• Candidates who are energized by challenge, thrive under pressure, and are prepared to do what it takes to achieve exceptional results
• Significant commitment, including flexibility to work extended hours, especially during critical project phases or client deadlines
• A pre-employment drug “fitness for duty” screening is required
• Applicants must be currently authorized to work in the US on a full-time basis in order to be considered

Nice To Haves

• Familiar with and able to read a contour map
• Basic Qualifications

Responsibilities

• Establish project Horizontal Control
• Verify accuracy of consultant-provided control
• Establish working control points from provided control
• Continuously check and maintain horizontal control
• Establish project Vertical Control
• Verify accuracy of consultant-provided control
• Establish working benchmarks from provided control
• Continuously check and maintain vertical control
• Check optical plummet
• Visually check instrument for evidence of damage or mis-adjustment
• Check and set temperature and pressure correction in Total Station
• Check and calibrate instrument collimation
• Run and adjust three-wire level loop
• Compute tangent grades
• Plot cross-sections and determine earthwork
• Read a contour map
• Make temperature corrections when chaining
• Provide layout from drawings without assistance
• Coordinate between drawings and discern potential conflicts
• Layout footings, columns, and building lines with no assistance
• Establish vertical dimensions from given finish floor elevations
• Compute concrete quantities for daily pours, slabs, columns, etc.
• Conduct fine grading operations
• Level deck with no assistance
• Grade columns with no assistance
• Establish secondary benchmarks
• Establish secondary horizontal and vertical control, i.e. column lines, offsets
• Compute and track concrete during pour

Benefits

• Clark promotes a drug free workplace
• Equal Opportunity Employer
• Clark is committed to working with and providing reasonable accommodations to individuals with disabilities

What This Job Offers

• Job Type: Full-time
• Career Level: Entry Level
• Education Level: No Education Listed