Surface Maintenance Mechanic

Army National Guard Units•Lincoln, NE

28d•Onsite

About The Position

THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a SURFACE MAINTENANCE MECHANIC, WG-5801-5/8/10, and is part of the Surface Maintenance Managers Office, National Guard. The role involves troubleshooting, performing maintenance, and major repairs on a wide variety of heavy-duty mobile equipment, combat, tactical, and automotive vehicles. This includes performing repairs on major systems such as internal combustion engines, transmissions, and hydraulic systems, as well as electrical components. The mechanic will diagnose mechanical failures using visual checks, auditory checks, and specialized test equipment. They will also be responsible for disassembling, repairing, and reassembling engines and major assemblies, and performing repairs and maintenance functions in remote locations. Additionally, the position includes conducting readiness and repair inspections, performing preventive maintenance, and providing technical guidance and leadership to lower-grade employees. The role may also involve Field and limited Sustainment maintenance at unit locations, recovery and evacuation of inoperable vehicles, and inspecting in-process repair work. The mechanic may also serve as a commodity inspector or as a member of a Maintenance Assistance Instruction Team, and will instruct operators on equipment maintenance and provide technical advice.

Requirements

Military membership in the Nebraska Army National Guard is required.
Males born after 31 December 1959 must be registered for Selective Service.
Obtain/maintain the level of security clearance/background check required.
Direct Deposit is mandatory.
NATIONAL GUARD MEMBERSHIP IS REQUIRED: This is a Title 32 excepted service position that requires membership in the Nebraska Army National Guard.
Selectee will be required to wear the military uniform daily.
Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.
Maximum Military Grade: E8
Minimum Military Grade: E1
Military Grade inversion within the full time work forces is not permitted.
The military grade of the full time supervisor must equal or exceed the military grade of the personnel supervised.
Compatibility will be followed in accordance with 32 USC 709(b) and 10 USC 10216.
Compatibility requirements must be met prior to appointment to the position.
In order to comply with US DOD requirements and ensure the safety and security of the missions, programs, property and personnel of the Nebraska Military Department, employees must obtain the appropriate background investigation and maintain the level of security clearance assigned to their respective work.
GENERAL EXPERIENCE: Experience or training which demonstrates knowledge of equipment to be able to do routine jobs, simple preventative maintenance tasks, and can use common tools and equipment in the line of work.
SPECIALIZED EXPERIENCE: WG-05: - 6 months experience or training using common hand tools in making repetitive repairs under close supervision. Experience which demonstrates the ability to perform the simpler and routine duties of the trade.
SPECIALIZED EXPERIENCE: WG-08: - 12 months experience or training using common hand and power tools and a small variety of test and measurement devices to make mechanical repairs. Experience removing, adjusting, replacing, cleaning, and installing a variety of parts, components, and accessories. Experience which demonstrates a basic understanding of mechanical, electrical, and hydraulic theory applying to vehicles; and skill to replace, fit, install, and make adjustments. Experience demonstrating an understanding of the makeup and operation of the various individual systems maintained and their interrelationships. Experience reading and interpreting parts lists, manufactures' repair manuals, diagrams, and electrical schematics.
SPECIALIZED EXPERIENCE: WG-10: - 18 months experience or training leading to a thorough knowledge of the mechanical makeup, operation, and working relationships of complex systems, assemblies, and parts for a variety of combat, tactical, commercial, special purpose vehicles, and equipment. Ability to diagnose, repair, overhaul, and modify a variety of combat, tactical, commercial, special purpose vehicles, and equipment. Knowledge of electrical, electronic, hydraulic, pneumatic, and other non-mechanical systems that have a functional relationship and effect on the operation of mechanical systems. Knowledge of hydraulic lifting, loading, turning, and positioning systems and their mechanical, hydraulic, pneumatic, electrical, and electronic controls. Basic knowledge of electronics, sufficient to identify and replace defective components, such as sensors, diodes, and circuit boards. Ability to repair or overhaul major components such as diesel, multi-fuel or gasoline engines, turbine engines, automatic and manual transmissions, drive line assemblies, electrical and electronic systems and accessories, fuel injection systems, and emission control systems.

Responsibilities

Troubleshoots, performs maintenance and major repairs on heavy-duty mobile equipment, combat, tactical and automotive vehicles.
Troubleshoots, repairs and overhauls major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls.
Makes repairs to assemblies and components such as voltage regulators, generators/alternators, brake cylinders, etc.
Performs work in accordance with modification work orders, technical manuals, lubrication orders, maintenance bulletins, regulations or management policies.
May repair a variety of more complex major systems to include engines, cross drive or similar multi-system transmissions and a variety of intricate fuel injection systems.
Troubleshoots equipment and diagnoses the cause of mechanical failures by means of visual and auditory checks and/or uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges, and computer diagnostic tools.
Utilizes embedded diagnostics in equipment and a wide variety of original equipment manufacturer system analyzers in order to determine the exact nature or extent of repair.
Determines what adjustments may be necessary to complete work orders, and whether any additional repairs other than those specified or indicated on the work order are necessary.
Removes and disassembles engines and major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems.
Makes the appropriate repairs, overhaul, or modifications in accordance with the proper repair specifications and procedures.
Reassembles engines and other systems, and adjusts, tests, and reinstalls in vehicles and equipment as necessary.
Makes adjustments and repairs to electrical and suspension systems.
May install pistons, sleeves, rings, bearings, rods, crankshafts, timing gears, and rocker arms.
May be required to perform fuel injection equipment repair, overhaul, rebuild, and calibration duties utilizing a variety of complex test and calibration equipment.
Independently performs repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems such as injectors, leaking wheel cylinders, corroded mufflers, fuel tanks, brake cylinders and worn brake shoes, voltage regulators, generators, injector pumps, and fuel pumps.
Provides technical guidance and specialized team leadership to lower grade employees within the team.
Assists lower grade mechanics in performing major repair work.
May provide Field and limited Sustainment maintenance at unit locations as part of a "contact team."
Recovers and evacuates inoperable vehicles from the unit location of breakdown.
May assist higher graded mechanics in repairing a variety of interconnected systems such as electrical, air and hydraulic systems, complex state of the art electrical and electronic systems that use specialized diagnostic equipment to identify problems, complex fuel injection systems and other similar complex systems.
Conducts readiness and repair inspections on vehicles and associated equipment supported by the activity.
Performs operational inspections and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc., and performs other preventive maintenance operations as required.
Inspects supported equipment prior to use during Inactive Duty Training (IDT) and Annual Training (AT), to ensure that it is functioning properly.
May inspect in-process repair work of lower graded repairer to ensure equipment is being repaired in accordance with pertinent requirements.
May serve as a commodity inspector during Command Maintenance Management evaluations (COMET) or as a member of a Maintenance Assistance Instruction Team (MAIT).
Instructs operator/crew in the maintenance of equipment and provides technical advice and assistance to supported units when requested.
Performs other duties as assigned