About The Position

SpaceX is seeking a Supplier Development Engineer to own the mechanical hardware commodity for Starship, including fasteners, dynamic hardware, fluid-control components, and related joining devices. The role spans supplier selection through rate production, with responsibility for manufacturers and finishing processes such as heat treatment and chemical processing, and for supplier quality systems that ensure reliable hardware. The goal is to scale the supply chain from prototype production to high-cadence flight hardware while maintaining reliability, quality, cost, and production rate. This is a hands-on, highly technical position involving work on supplier shop floors, heat-treat and coating lines, in metrology labs, and in design reviews. The engineer serves as the primary technical contact for assigned parts and suppliers, leads new product introduction and production transfers, validates processes, resolves manufacturing and quality issues, and develops supplier capability. The role also represents SpaceX on SAE technical committees related to fasteners, hardware, and associated standards.

Requirements

  • Bachelor’s degree in an engineering discipline.
  • At least 1 year of experience in manufacturing engineering, process engineering, or supplier development.
  • Ability to work extended hours, including some nights and/or weekends when flight or production priorities demand it.
  • Ability to travel frequently to suppliers, up to 50–75%.
  • Valid driver’s license.
  • Must meet applicable U.S. Government export-control eligibility requirements or be eligible to obtain the required authorizations.

Nice To Haves

  • Hands-on familiarity with mechanical fasteners and joining hardware, such as bolts, nuts, screws, studs, washers, pins, springs, fittings, and inserts.
  • Experience with fastener or precision-hardware manufacturing processes, including cold heading or forging, thread rolling or cutting, machining, heat treatment, surface finishing, plating or coating, passivation, and secondary operations.
  • Familiarity with destructive and nondestructive inspection methods relevant to fasteners and hardware, such as hardness, tensile, fatigue, magnetic-particle, fluorescent-penetrant, and dimensional-metrology inspection.
  • Working knowledge of aerospace and industry fastener or material standards, including NAS, AN, MS, ASTM, AMS, NASA/JSC, and ISO.
  • Experience assessing supplier technical capability and capacity, including equipment, process control, operations, and personnel.
  • Knowledge of supplier-quality frameworks, including PPAP, APQP, FAIR, control plans, PFMEA, and MSA.
  • Experience with AS9100 or ISO 9001 quality systems and high-reliability or high-volume production environments.
  • Ability to drive root-cause analysis and corrective action using structured methods such as 8D, 5-Why, fishbone, and Pareto, and statistical tools such as capability analysis, DOE, and SPC; Minitab or equivalent is a plus.
  • Comfort reading engineering drawings, including GD&T, material callouts, and special-process requirements.
  • Experience with CAD and with creating or revising drawings in collaboration with design engineering.
  • Experience implementing process improvements, automation, or advanced inspection in manufacturing or quality.
  • Strong written and verbal communication skills and ability to influence suppliers and internal stakeholders under schedule pressure.
  • Knowledge of lean manufacturing and continuous-improvement methods.

Responsibilities

  • Own the Starship mechanical hardware commodity, including fasteners, dynamic hardware, fluid-control components, and related joining devices, from supplier selection through rate production.
  • Serve as the primary technical point of contact for assigned parts and suppliers, resolving manufacturing, quality, and capacity issues that threaten build or flight schedules.
  • Lead new product introduction and work transfers for fastener and hardware products, including supplier qualification, process validation, and production ramp-up.
  • Drive production part approval and process validation, including PPAP, FAIR, and capability studies, to ensure critical characteristics are controlled and proven.
  • Lead containment for nonconforming hardware, define scope with engineering, quality, and production, execute disposition, and prevent recurrence.
  • Investigate and root-cause supplier or internal defects involving processes such as heat treatment, plating or coating, thread forming or rolling, machining, forging, material certification, and dimensional or GD&T escapes.
  • Partner with design and manufacturing engineering to improve designs, specifications, and process callouts for manufacturability, lead time, cost, and defect reduction.
  • Assess supplier capability and capacity, including equipment, tooling, personnel, and quality systems; develop underperforming suppliers or dual-source or re-source when needed.
  • Work with procurement to identify, vet, and develop fastener and specialty-hardware suppliers that meet aerospace quality and SpaceX production-rate needs.
  • Become the subject-matter expert for assigned parts and processes, own supply-chain-related defects, and drive them to zero escapes.
  • Represent SpaceX at SAE technical committee meetings and advocate for company positions on fastener, hardware, and related standards.
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service