Substation Technician 2

Pedernales Electric Cooperative•Johnson City, TX
•$88,277 - $110,406•Onsite

About The Position

This position is responsible for 24/7 system operations involving calibration, commissioning, inspection, maintenance, and repair of transmission and distribution equipment, protective relays, switches, apparatus, and Power Line Carrier (PLC) communication systems. The work supports the transmission grid, distribution infrastructure, and capital improvement projects. The role may provide technical direction to others and includes emergency call-out duty for substation issues and power outages. The position is based at the PEC Haley Road Offices, 302 Haley Road, Johnson City, TX 78636. Minimum starting base pay is $42.46, with KPI bonuses and competitive benefits; the midpoint of the pay range is $53.08. Starting base pay may be higher depending on experience, job-related skills, and relevant education or training. The position is open until filled.

Requirements

  • Associate’s degree in Electrical Power and Controls, Electronics Technology, or a related field; directly related experience may substitute for education.
  • Two years of experience as a Substation Technician I or equivalent experience.
  • Valid Texas Driver’s License and a Motor Vehicle Report that comply with PEC policy.
  • Knowledge of computer systems and applications, including hardware and software use, data entry, and information processing.
  • Knowledge of customer service principles and processes.
  • Knowledge of substation protection schemes, including bus and transformer differential, breaker failure, cable fault, and zone protection schemes.
  • Knowledge of basic electricity, safety rules and procedures, and hazards of working around energized high- and low-voltage lines and equipment.
  • Knowledge of substation communication (SCADA), relaying, monitoring, and control systems.
  • Knowledge of interpreting wiring diagrams and electrical control schematics for relay applications.
  • Knowledge of electrical theory as applied to power transformers, autotransformers, relays, SCADA, and TWACS systems.
  • Ability to read manuals and interpret diagrams.
  • Skill in using substation test equipment, including DOBLE 6150, DOBLE M4000, MEGGER, hi-pot, CT test set, phasing sticks, oil dielectric, contact resistance, and SFRA equipment.
  • Time-management skills and ability to prioritize and manage changing priorities.
  • Ability to use computer systems and applications.
  • Ability to communicate effectively and understand information verbally and in writing.
  • Ability to anticipate, identify, analyze, and resolve conflicts and problems.
  • Ability to meet the physical and work-environment demands described, including lifting, carrying, pushing, pulling, or moving up to 100 pounds; travel; use of personal protective equipment; emergency restoration and call-out duty; and exposure to outdoor weather and moderate-to-loud noise.
  • May be required to work more than 40 hours per week.

Responsibilities

  • Perform time-based maintenance and inspections of substation equipment in accordance with cooperative standards, manufacturer recommendations, and NERC compliance requirements.
  • Conduct monthly inspections of substation facilities and equipment and maintain records in PEC’s maintenance tracking software.
  • Perform substation switching under the direct supervision of a Substation Technician 3 or Substation Supervisor.
  • Execute formal switching orders from the PEC Transmission Control Center to manipulate transmission-grid power flow or isolate transmission equipment.
  • Write and execute formal switching orders to manipulate medium-voltage distribution-grid power flow or isolate distribution equipment.
  • Install mobile substations for construction projects, routine transformer maintenance, and emergency power restoration.
  • Test substation equipment using applicable electrical test sets and methods, including transformer turns ratio, contact resistance, oil dielectric, transformer power factor, winding resistance, SFRA, relay verification and calibration, hi-pot, and phasing tests.
  • Test and inspect substation battery banks and chargers, including strap impedance, cell voltage and impedance, specific gravity, temperature, charging current, and bank voltage.
  • Locate and repair DC grounds in substation control systems.
  • Inspect, analyze, test, and repair 138 kV SF6 gas breakers and 69/138 kV oil breakers.
  • Take oil samples from energized substation equipment for dissolved gas analysis and fluid quality testing, and review and interpret laboratory results.
  • Inspect and repair substation power transformer load tap changers according to manufacturer specifications.
  • Perform infrared thermography inspections and repair identified hot spots on substation switches and connections.
  • Perform partial discharge surveys on energized substation equipment.
  • Provide technical support for substation capital improvement projects, including temporary equipment installation, load transfers, complex high-voltage switching, and equipment isolation.
  • Commission new or upgraded substations, energize new equipment, and perform tests and electrical checks to verify reliable operation.
  • Verify wiring diagrams and electrical control schematics during commissioning and make corrections or design changes to support proper operation.
  • Program Schweitzer electronic protective relays and function-test protection schemes by trip-checking new substation equipment.
  • Write logic scripts used as test plans for SEL digital protective relay tests.
  • Program, test, and commission programmable logic controllers for substation protection circuits.
  • Perform end-to-end testing of PEC transmission carrier and fiber communication systems.
  • Analyze equipment test results and recommend practical, cost-effective solutions for performance and repair issues.
  • Follow work procedures and company policies and carry out operating procedures.
  • Perform emergency call-out duty and respond to substation issues and power outages.
  • Record test data to maintain NERC, FERC, and TRE compliance.
  • Coordinate activities with other departments.
  • Operate PEC vehicles for business purposes in compliance with applicable laws and PEC policies.
  • Maintain a valid Texas driver’s license and driving record in accordance with PEC policy.
  • Protect confidential information, stay current with technological advances, and demonstrate regular and prompt attendance.
  • Perform other related duties as necessary or assigned.

Benefits

  • KPI bonuses
  • Competitive benefits
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service