About The Position

The Staff Power Electronics Hardware Design Engineer is a senior technical individual contributor responsible for power-stage hardware architecture, design, verification, validation, and production release for advanced power-conversion products. The role owns high-voltage, high-power hardware from topology selection through validated prototypes and commercial-scale manufacturing, and establishes hardware design rules for the product line. The engineer provides technical leadership and mentorship while collaborating with Controls, Firmware, PCB, Mechanical, Test, Manufacturing, and Compliance teams. The work includes power systems operating up to approximately 2200 VDC, 2000 VAC, and 10 to 800 kW. The position is based preferably in Merrimack, NH, with other approved company locations also considered. A hybrid schedule of approximately three to four days onsite per week is expected; remote arrangements may be considered for exceptionally qualified candidates. Travel within North America may be required up to approximately 20%. Employment sponsorship and relocation assistance may be available. The role requires a bachelor's degree in Electrical Engineering or a related technical field and at least 10 years of industrial power-electronics hardware design experience. Compensation is $140,000 to $170,000 per year, with a 10% target annual bonus.

Requirements

  • Bachelor's degree in Electrical Engineering or a related technical field.
  • At least 10 years of industrial power-electronics hardware design experience.
  • Hands-on high-power power-stage design experience and experience taking power hardware from schematic through validated prototype.
  • Required experience with Si power devices, SiC power devices, MOSFETs, gate-drive design, and power-semiconductor selection.
  • Strong analog-design experience, including current and voltage sensing and protection and fault-monitoring circuits.
  • Experience with magnetic-component design or specification, filter topologies, EMC/EMI design, and insulation coordination.
  • Knowledge of high-voltage creepage and clearance requirements.
  • Hands-on high-voltage and high-power laboratory experience.
  • Experience defining hardware requirements for control software and programmable logic.
  • Experience verifying designs against technical requirements, building and validating prototypes, and defining production and compliance test methods.
  • Experience collaborating with PCB designers and with Mechanical Engineering on packaging and cooling.
  • Schematic-capture, simulation, and modeling experience.
  • Strong engineering documentation, technical leadership, analytical, problem-solving, written communication, and verbal communication skills.
  • Ability to independently own complex hardware programs, lead a technical workstream, and mentor engineers without direct-report responsibility.
  • Ability to work effectively with Controls, Firmware, PCB Design, Mechanical, Test, Manufacturing, and Compliance teams in a fast-moving and evolving engineering environment.
  • Ability to work a hybrid schedule approximately three to four days onsite per week; Merrimack, NH is strongly preferred, though candidates near other approved company locations may be considered.
  • Ability to travel up to approximately 20% within North America.
  • Ability to sit and work at a computer for extended periods; visually review schematics, layouts, simulation results, calculations, specifications, and test data; stand and walk in labs and production or test areas; use hands and fingers for computer work and equipment; bend, reach, stoop, and access test fixtures and equipment; work hands-on with high-voltage hardware in controlled laboratory environments; work around energized systems while following safety procedures; wear required PPE; travel as needed; and maintain concentration and technical accuracy.

Nice To Haves

  • AC/DC power-conversion experience.
  • DC/AC inverter experience.
  • DC/DC converter experience.
  • Experience with IGBTs and/or SCRs.
  • Experience with tools such as LTspice, MATLAB, Simulink, PSIM, Python, or equivalent.
  • PLM and controlled-documentation experience.
  • Master's or doctoral degree in Electrical Engineering or Power Electronics.
  • Transformer, inductor, and common-mode-choke design experience.
  • DSP, FPGA, or PLD design knowledge.
  • Experience with RS-485, CAN, Ethernet, SPI, or I2C.
  • UL 62477-1 or UL 1741 experience.
  • NRTL listing experience.
  • IEC 62040-3 or IEEE 2405 testing experience.
  • Experience with parallel converters on high-voltage DC buses.
  • Experience with isolated DC/DC converters and medium-frequency transformers.
  • Liquid-cooled power-assembly experience.
  • NFPA 70E certification.
  • Candidates near approved company locations; exceptionally qualified candidates may be considered for remote arrangements.

Responsibilities

  • Own power-stage hardware design for assigned power-conversion products and establish product-line hardware design rules and technical standards.
  • Design AC/DC rectifier, DC/AC inverter, bidirectional DC/DC, multi-phase, and interleaved DC/DC power-conversion architectures.
  • Develop high-power systems operating up to approximately 2200 VDC, 2000 VAC, and 10 to 800 kW.
  • Select and apply Si MOSFETs, SiC MOSFETs, IGBTs, and SCRs; design gate-drive circuitry.
  • Design current and voltage sensing, protection and fault-detection circuitry, auxiliary power supplies, DC-link circuits, pre-charge and discharge circuits, filters, snubbers and clamps, relay and contactor drives, and fan controls and monitoring.
  • Support capacitor and supercapacitor energy-storage interfaces.
  • Design or specify low- and high-frequency magnetic components and work with suppliers to qualify magnetic and filter components.
  • Analyze electrical losses, efficiency, thermal performance, component stress, and derating requirements; partner with Mechanical Engineering on cooling, busbars, packaging, and thermal interfaces.
  • Design for applicable safety and regulatory requirements, including insulation coordination, creepage and clearance, and EMC/EMI requirements; support designs against standards such as UL 62477-1.
  • Define hardware requirements for Controls and Firmware, including sensing ranges, PWM limits, dead-time requirements, protection thresholds, and response times; review controls and firmware designs for hardware compatibility.
  • Provide schematics and technical design intent to PCB designers and review PCB layouts for high-power and fast-switching circuits.
  • Lead hardware conceptualization, detailed design, paper-based design verification against requirements, prototype build and test planning, and prototype hardware validation.
  • Define test methods for design validation, production, and regulatory compliance.
  • Prepare engineering specifications, design calculations, design-review packages, and released technical documentation in PLM systems; lead technical design reviews.
  • Plan and track hardware workstream scope and schedule and support transfer of new designs into production.
  • Troubleshoot hardware issues found during production and resolve field hardware issues.
  • Mentor hardware designers and engineers and provide senior technical leadership without formal people-management responsibility.
  • Perform other staff-level power-electronics engineering duties as assigned.

Benefits

  • Annual bonus with a 10% target.
  • Relocation assistance may be available.
  • Employment sponsorship may be available.
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service