Staff Mechanical Design Engineer (PCS)

Antares•Los Angeles, CA
•$118,000 - $205,000•Onsite

About The Position

As a Mechanical Design Engineer on the Power Conversion System (PCS), you will design the hardware that integrates turbomachinery, a motor-generator, a recuperator, and a primary heat exchanger into an installed, testable, and operable power plant. The scope includes the working-fluid pressure boundary, structural and layout architecture that carries and aligns rotating machinery, and high-temperature hardware. The role addresses routing, supports, thermal growth, leak-tightness, access, and assembly sequence; owns the mechanical arrangement and pressure budget; manages interfaces with major PCS components, the reactor, and safety systems; and carries hardware from concept through fabrication, assembly, and test. You will support test-rig design and instrumentation placement and use test data on component life and performance to inform design revisions. The role involves designing for low leakage and thermal growth, as well as packaging high-temperature machinery and developing first-of-a-kind hardware. Antares develops deployable microreactors for terrestrial, underwater, and space applications. The position is located at the company's facility in Torrance, California.

Requirements

  • Bachelor's degree in Mechanical Engineering, Aerospace Engineering, or a related engineering discipline.
  • 7+ years of full-cycle design engineering experience for Engineer II, or 5+ years for Senior Engineer, including hands-on CAD, analysis, fabrication support, and test.
  • Experience designing pressure-retaining or leak-tight fluid hardware and supporting pressure and leak verification.
  • Experience releasing production-intent mechanical drawings and models for fabrication, including GD&T and tolerance stack-up.
  • Experience designing hardware for elevated-temperature or high-stress service, including material selection.
  • Experience working the mechanical interfaces between multiple components integrated into a single assembly.
  • For U.S. Government export-regulation compliance, applicants must meet an eligible U.S. citizenship, permanent-resident, refugee, or asylee status, or be eligible to obtain required authorizations from the U.S. Department of State.

Nice To Haves

  • Experience in the Nuclear, Aerospace, Automotive, Power Generation, Motorsports, or Oil and Gas industries.
  • Experience designing to pressure-boundary codes and standards such as ASME B31.3 or ASME BPVC Section VIII, and writing or executing pressure and leak test procedures.
  • Experience with compressible flow and flow-network or pressure-drop modeling to close a system pressure budget.
  • Experience packaging or integrating rotating machinery, including alignment, supports, and machinery loads.
  • Experience with high-temperature systems, including thermal-growth accommodation, expansion joints and bellows, and insulation design.
  • Experience with skid-mounted or modular plant packaging, system layout, and designing for maintenance access.
  • Experience with piping flexibility and stress analysis, and structural FEA of supports and anchors.
  • Experience with high-temperature metals and advanced materials, including creep-limited design in stainless steels or nickel superalloys.
  • Experience designing to transport and seismic load cases.
  • Experience supporting test-rig design, instrumentation and sensor placement, and using test data to drive design changes.
  • Experience with design-engineering tools such as NX, ANSYS, or Femap, and other product-lifecycle software.
  • Experience commissioning first-of-a-kind hardware and supporting bring-up and troubleshooting.
  • Experience in a demanding, fast-paced development environment.

Responsibilities

  • Own the PCS mechanical arrangement and pressure budget, coordinating with cycle performance on parasitic losses.
  • Design the working-fluid pressure boundary, including piping, joints, penetrations, and isolation, with leak-tightness and pressure retention as key requirements for a closed cycle.
  • Define the mechanical arrangement and maintenance architecture, including skid or module arrangement, supports, anchors, and rotating-machinery alignment, accounting for thermal growth, machinery loads, safety, transport, and seismic conditions.
  • Manage mechanical interfaces with major PCS components, the reactor, and safety systems.
  • Support test-rig design and instrumentation placement, and use collected data to improve component life and performance.
  • Engineer components for high-temperature, high-stress service using metals and advanced materials in partnership with materials and structural-analysis teams.
  • Perform design-for-manufacturability and assembly assessments, including assembly sequence, access, maintainability, and field installation.
  • Work with Mechanical, Electrical, Safety, and Nuclear teams to ensure designs meet overall objectives and requirements.

Benefits

  • A 322,000-square-foot facility featuring open spaces for collaboration, R&D, and production.
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service