Sr. Electrical Engineer, User Terminals - TeraWave

BLUE ORIGIN•Cupertino, CA
•$156,802 - $219,522

About The Position

Blue Origin is seeking a founding Sr. Electrical Engineer to own user-terminal board design for TeraWave, its satellite communications network. The engineer will define schematic and layout approaches for a new product line while coordinating with RF, ASIC, antenna, thermal, and mechanical engineers whose requirements are developing in parallel. The role spans a family of terminals with different capabilities and cost targets. The engineer will carry designs from architecture through prototype bring-up and fabrication release, then use lessons learned to develop subsequent variants. These terminals are mass-market products, so production volume, unit cost, availability, lead time, and manufacturability are important design constraints. The work centers on mixed-signal power integrity and thermal codesign, including delivering substantial and dynamic current to mmWave phased-array apertures and removing heat from high-power-density boards. The engineer will also work across high-speed digital buses and clocks, beamforming ICs, and sensitive mmWave routing, collaborating directly with in-house RF and antenna teams to develop the physical interface between the electronics and radiating elements. The position will lead board-level design, analysis, prototype debug, characterization, and support for qualification and regulatory compliance. It will also help establish electrical design practices, review standards, and documentation for the terminal program.

Requirements

  • Bachelor's degree in Electrical Engineering or a related technical field.
  • At least 7 years of experience in complex hardware product development, such as telecom infrastructure, mmWave or 5G radio hardware, high-performance computing hardware, or comparable fields.
  • Proficiency with EDA tools such as Altium Designer or Cadence Allegro, including hands-on schematic capture and layout of high-speed, multilayer, mixed-signal boards.
  • Demonstrated experience designing robust power delivery networks for high-current, dynamically loaded systems.
  • Strong working understanding of RF fundamentals, including impedance matching, transmission-line design, shielding, and insertion loss, sufficient to co-design with RF and antenna specialists.
  • Hands-on experience using high-speed oscilloscopes, spectrum analyzers, and vector network analyzers for hardware characterization and debug.
  • Track record of carrying hardware through its full lifecycle, from concept and schematic through integration, test, and production.
  • Comfort working with requirements that are still being defined and judgment to make design decisions that remain sound as requirements firm up.

Nice To Haves

  • Master's degree in Electrical Engineering or a related technical field.
  • mmWave hardware design experience, including Ka-band, Q/V-band, E-band, or 5G mmWave (FR2); this is more relevant than sub-6 GHz experience.
  • Phased-array experience, including beamforming IC integration, digital or hybrid beamforming architectures, packaged-antenna integration, tile- or panel-based array construction, and array calibration.
  • Direct experience co-designing PCB-to-radiator interfaces with antenna specialists, including rigid-flex and board-to-board RF interconnect.
  • Experience with large-format or panel-limited PCB design, including fabricator panel-size and process constraints.
  • Board-level thermal design for high power density, including heat spreading, thermal interface selection, and codesign with mechanical and thermal engineering.
  • Familiarity with satellite communication systems (LEO/GEO) or commercial high-capacity wireless infrastructure.
  • Experience designing hardware around high-performance SoCs or FPGAs, including AMD/Xilinx, Microchip, Altera/Intel, or high-speed Arm application processors, and DDR interfaces and SerDes.
  • Track record of achieving regulatory compliance for intentional radiators, such as FCC Part 15/Part 25, CE, or ETSI.
  • Experience designing hardware for outdoor, weather-exposed installation, including sealing, ingress protection, and environmental qualification.
  • Experience reducing hardware costs across successive generations or designing for high-volume consumer or automotive manufacturing.

Responsibilities

  • Own schematic capture and layout strategy for user-terminal logic boards and aperture PCBAs, from architecture through release to fabrication.
  • Lead multilayer, high-density interconnect PCB design while maintaining isolation between high-speed digital, IF, and sensitive mmWave routing on shared stackups.
  • Design power delivery networks that supply and distribute high aggregate current across large-format boards and accommodate beamforming-related dynamic loads.
  • Partner with thermal and mechanical engineering on board-level thermal design and heat extraction.
  • Collaborate with in-house RF, antenna, and ASIC engineers to define and optimize the physical interface between PCBs and radiating elements, including packaged-antenna integration, front-end IC placement, and feed routing.
  • Design and route high-speed data buses and reference-clock distribution networks connecting modem, processing, and beamforming devices; manage insertion loss, matching, and phase and amplitude consistency across parallel chains.
  • Perform board- and system-level signal integrity, power integrity, crosstalk, and EMI simulation and analysis.
  • Contribute to component selection and architecture trades across processing, power, and front-end, considering availability, lead time, cost, and performance.
  • Drive design for manufacturability and test with PCB fabricators and assembly partners, including panel utilization, stackup feasibility, and production-volume yield.
  • Lead physical bring-up, hardware debug, and functional lab characterization of prototype boards and integrated terminals.
  • Support qualification and regulatory compliance testing for an intentional radiator.
  • Help establish electrical design practices, review standards, and documentation for the terminal program.

Benefits

  • Medical insurance
  • Dental insurance
  • Vision insurance
  • Basic and supplemental life insurance
  • Paid parental leave
  • Short- and long-term disability
  • 401(k) with company match of up to 5%
  • Education Support Program
  • Stock options for regular employees working at least 20 hours per week
  • Paid time off of up to four weeks per year based on weekly scheduled hours
  • Up to 14 company-paid holidays
  • Depending on role type and job level, possible benefits and bonuses based on individual contributions, company results, or other factors; eligibility and amounts are not guaranteed
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service