Senior Seismic / Geotechnical Engineer

Geometrics Engineering•Seattle, WA
•$150,000 - $180,000

About The Position

Geometrics Engineering, Inc. is hiring a licensed geotechnical or seismic engineer to lead site-specific seismic hazard and ground motion work for essential-facility buildings and infrastructure. The engineer will own seismic ground motion work from field-program planning and site characterization through analysis, stamped reporting, and peer review. Projects typically involve Risk Category III and IV facilities, including air traffic control towers and fire stations, on soft or liquefiable alluvium near active faults. The role includes seismic hazard analysis, ground-motion development and scaling, equivalent-linear and nonlinear site-response analyses, design parameter recommendations, and coordination with geotechnical staff, structural engineers, owners, peer reviewers, and building departments. The engineer will also mentor colleagues and help develop Geometrics' in-house earthquake engineering capability. The position may be full-time or part-time, with minimum part-time hours to be agreed. Candidates may work from the Redmond, Washington office, in a hybrid arrangement, or remotely. Occasional Puget Sound site visits and meetings are required, with more travel for local candidates. Compensation is negotiable based on work arrangement, experience, and licensure: $150,000–$180,000 annually for full-time or $72–$86 per hour for part-time.

Requirements

  • Current Professional Engineer license in good standing in any U.S. state.
  • Bachelor of Science in civil engineering or a related field.
  • At least 10 years of experience in seismic hazard analysis and site response for buildings or infrastructure.
  • Completed site-specific ground-motion studies under ASCE 7 Chapter 21 for Risk Category III or IV structures.
  • Experience with PSHA using USGS NSHM models and ground-motion selection for both subduction and crustal sources.
  • Experience with nonlinear effective-stress site response at liquefiable sites, such as PM4Sand/PM4Silt in FLAC, OpenSees, or DEEPSOIL.
  • Working knowledge of NGA-West2 and NGA-Sub ground-motion models.
  • Clear technical writing skills and reports that pass peer review and building department review.
  • Valid U.S. driver's license and ability to obtain airport security badging for site work.
  • Authorization to work in the U.S.; offers are contingent on a background check and drug screening.

Nice To Haves

  • Washington or California PE licensure.
  • Puget Sound and California seismic experience.
  • Washington PE license or eligibility for Washington licensure by comity; a California PE or GE is a strong plus.
  • Puget Sound project experience, including Seattle Fault Zone and Seattle basin effects.
  • Experience at airports and other essential facilities, such as control towers, fire stations, and hospitals.
  • Experience with independent peer review and building department review of site-specific studies.
  • Familiarity with ASCE 7-16 and ASCE 7-22, including multi-period spectra and the new site classes.
  • Experience with ASCE 41 seismic hazard levels for existing buildings and kinematic soil-structure interaction.
  • Experience developing ground motions for nonlinear response history analysis, including near-fault pulse records.
  • Master's or Ph.D. in geotechnical earthquake engineering.

Responsibilities

  • Review exploration, geophysics, and laboratory programs before drilling; set the reference input layer for site response and the Vs depth required to reach it.
  • Specify and verify P-S suspension logging, seismic CPT (SCPTu), downhole, and MASW/ReMi surveys.
  • Develop best-estimate, lower-bound, and upper-bound Vs profiles and extend profiles below exploration depth using regional basin velocity models.
  • Assign modulus reduction and damping curves from laboratory data or published models, apply large-strain strength corrections, and specify cyclic DSS and other dynamic laboratory tests.
  • Run probabilistic seismic hazard analyses using the USGS NSHM version applicable to the governing code, including deaggregation by source type, magnitude, and distance.
  • Model shallow crustal faults, including the Seattle Fault Zone, deep intraslab sources, and Cascadia interface sources.
  • Develop risk-targeted MCER spectra with maximum-direction conversion and perform deterministic checks under ASCE 7 Chapter 21.
  • Evaluate basin amplification using Z1.0/Z2.5 terms and published basin factors without double-counting amplification in 1D site response.
  • Evaluate near-fault directivity and velocity-pulse effects and determine whether pulse-like records are needed.
  • Develop conditional mean or scenario target spectra for each controlling source type.
  • Select and scale or spectrally match suites of 7 to 11 records per source type, ensuring interface suites reflect long Cascadia durations.
  • Prepare ground-motion suites for nonlinear response history analysis under ASCE 7 Chapter 16, including pulse and no-pulse records for near-fault sites.
  • Run 1D equivalent-linear and nonlinear total-stress analyses.
  • Run nonlinear effective-stress analyses using calibrated constitutive models such as PM4Sand and PM4Silt to capture pore-pressure generation and liquefaction.
  • Bracket liquefied and non-liquefied response and recommend how it should be enveloped in design spectra.
  • Apply kinematic soil-structure interaction, including base-slab averaging and embedment, under ASCE 7 Chapter 19 when requested.
  • Recommend surface MCER and design spectra, including the 80% lower limit, and SMS, SM1, SDS, SD1, and PGAM.
  • Provide multi-period spectra and new ASCE 7-22 site classes, and provide parameters for both code editions while adoption is pending.
  • Document whether ASCE 7 Section 11.4.8 exceptions apply to short-period structures.
  • Develop ASCE 41 BSE-1E and BSE-2E spectra when evaluating existing buildings.
  • Provide PGAM, magnitude, CSR, and shear-strain profiles for liquefaction triggering and settlement analyses.
  • Provide free-field displacement profiles for pile kinematic and lateral-spreading analyses.
  • Prepare and stamp design ground-motion reports with spectra tables, time histories, and site-response files for structural engineers.
  • Respond to independent peer review and building department comments.
  • Coordinate with Geometrics geotechnical staff, structural engineers of record, and owners.
  • Mentor Geometrics engineers and help build the firm's in-house earthquake engineering capability.

Benefits

  • Company-paid medical, dental, and vision insurance.
  • Company-paid short-term disability, long-term disability, and life insurance; life insurance coverage is three times salary, up to $500,000.
  • 401(k) contribution of 3% of annual salary, subject to minimum-hours and service requirements.
  • Three weeks of vacation and one week of medical leave.
  • Ten national holidays plus two floating holidays.
  • Company-paid professional memberships, registrations, and license renewals.
  • $52 per month mobile phone stipend.
  • Remote, hybrid, or part-time schedules considered.
  • Benefit eligibility and paid leave for part-time schedules will be confirmed at offer.
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service