Sr Power Systems Studies Engineer

Tract Capital Management, LP•Austin, TX

About The Position

Tract Capital is seeking a Senior Power Systems Studies Engineer to lead electrical studies for large-scale power infrastructure serving data center campuses. The role analyzes the integrated system from the utility point of interconnection through HV/MV substations, behind-the-meter generation, battery energy storage systems (BESS), campus distribution, and downstream data center loads. The engineer establishes study methods and assumptions, builds and validates models, performs or directs technical analyses, and translates results into actionable design, protection, control, and operating requirements. The work covers grid-connected and islanded operating modes. BESS is evaluated for defined applications such as load smoothing and peak shaving; grid-forming, islanding, or backup-power capability must not be assumed unless included in the approved project design basis. The position coordinates technical inputs and model exchanges with utilities, independent system operators, EPCs, engineering consultants, generator and BESS OEMs, and controls vendors. It also supports project development, design reviews, procurement, commissioning, and energization. Tract Capital offers competitive compensation and comprehensive benefits, including employer-covered medical, dental, and vision insurance, a 401K program, standard paid holidays, and unlimited PTO.

Requirements

  • Bachelor’s degree in electrical engineering or a related discipline.
  • 10+ years of relevant experience performing or reviewing power-system studies for utility, generation, transmission, substation, industrial, or mission-critical infrastructure.
  • Demonstrated ability to conduct integrated studies across utility interconnection, HV/MV substations, synchronous generation, BESS/inverter-based resources, and large campus or data center loads.
  • Hands-on proficiency with integrated system and steady-state/short-circuit analysis software such as ETAP or equivalent, plus experience with a transmission planning tool such as Siemens PSS®E or GE PSLF.
  • Experience with an RMS dynamic stability platform such as PSS®E, PSLF, PowerFactory, or equivalent.
  • Experience with an EMT simulation platform such as PSCAD, EMTP-RV, or equivalent, and ability to work with validated generator and BESS control models.
  • Experience with protection coordination and arc-flash tools such as ASPEN OneLiner, ETAP, SKM PowerTools, EasyPower, or equivalent.
  • Experience with grounding analysis tools such as CDEGS/SES, ETAP, SKM, or equivalent.
  • Practical experience with Python, MATLAB/Simulink, or comparable tools for data processing, model QA, and repeatable calculations.
  • Experience preparing, validating, or reviewing models and study reports; identifying assumptions and limitations; and explaining implications for design and operation.
  • Strong understanding of generator, inverter-based resource, relay, and control-system behavior relevant to grid-connected and islanded systems.
  • Ability to interpret one-line diagrams, protection and control schematics, equipment specifications, utility requirements, and construction documents.

Nice To Haves

  • Master’s degree in power systems.
  • Professional Engineer (PE) license or ability to obtain licensure.
  • Experience with large data center campuses, mission-critical electrical systems, or phased high-density loads.
  • Experience with reciprocating engine or gas-turbine generation, BESS integration, utility interconnection, and microgrid or islanded operation.

Responsibilities

  • Develop and maintain integrated models spanning the utility source, interconnection facilities, HV/MV substations, behind-the-meter generation, BESS, campus distribution, and data center blocks.
  • Define study scope, model boundaries, operating cases, contingencies, assumptions, acceptance criteria, and data requirements; document model limitations and study conclusions.
  • Perform and review load-flow and steady-state studies, including voltage profiles, losses, equipment and feeder loading, contingency performance, reactive-power needs, and generator/BESS dispatch and charging scenarios.
  • Perform and review short-circuit and equipment-duty studies, including fault contributions from utility sources, synchronous generators, and inverter-based resources; verify interrupting, withstand, and bus ratings.
  • Perform and review protection coordination, relay settings, breaker-failure and bus protection, grounding and zero-sequence analysis, arc-flash, and protection interfaces across utility, generation, storage, and campus systems.
  • Analyze islanded-system stability and operating performance, including generation-load balance, frequency and voltage response, load steps and rejection, load shedding, generator dispatch, reserve requirements, black start, restoration, and resynchronization, as applicable to the design basis.
  • Perform or direct RMS dynamic and electromagnetic transient (EMT) studies when appropriate, including generator and BESS controls, inverter interactions, fault response, switching and energization events, islanding transitions, and utility disturbances.
  • Assess power quality and transient performance, including harmonics, resonance, flicker, voltage deviation, motor starting, transformer energization, switching transients, and interactions with sensitive data center loads.
  • Evaluate BESS charging and discharging for load smoothing and other approved applications, including impacts on load ramps, generator operation, transformer and feeder loading, power quality, protection, and interconnection limits.
  • Represent phased data center development and load characteristics in study cases, including block-level demand, large load steps, redundancy configurations, and changes in campus operating scenarios.
  • Convert study results into practical requirements for equipment ratings, protection, grounding, controls, operating limits, interconnection, commissioning, and operating procedures.
  • Coordinate technical study inputs and model exchange with utilities, independent system operators, EPCs, engineering consultants, generator and BESS OEMs, and controls vendors.
  • Review utility and consultant studies, interconnection requirements, OEM models, equipment data, and design packages for technical consistency and alignment with project assumptions.
  • Identify data gaps, interface risks, and conflicts among utility, generation, BESS, substation, and data center scopes; drive resolution with responsible parties.
  • Support project development, design reviews, procurement, commissioning, and energization by communicating study findings, limitations, and open actions to technical and nontechnical stakeholders.

Benefits

  • 100% employer-covered medical insurance
  • 100% employer-covered dental insurance
  • 100% employer-covered vision insurance
  • 401K program
  • Standard paid holidays
  • Unlimited PTO
  • Competitive compensation
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service