Senior Power & Analog Design Engineer

RTX•Phoenix, AZ
•$86,800 - $165,200•Onsite

About The Position

Raytheon’s Effector Analog & Power (EAP) Team is seeking senior-level engineers to design robust power, analog, or motor-control systems. The department develops products from concept through integration, including telemetry and flight-termination products, power systems, servo electronics, and low-noise mixed-signal electronics that interface with front-end sensors. Products generally operate at less than 10 kW and 1,000 V. The engineer will design, analyze, simulate, test, and document power-conversion and related analog circuitry, primarily for board-mounted applications. The work includes architecting circuit-card power schemes, developing requirements, supporting circuit-card development from requirements definition through initial integration testing, managing circuit-level schedules, and guiding ECAD drafters through layout and routing activities and layer-stackup definition. This is an onsite U.S.-based position in Phoenix, Arizona. U.S. citizenship and an active, transferable U.S. government security clearance are required before the start date; the posting also states that the ability to obtain an interim clearance is required before the start date. A 9/80 work schedule is offered, and the position is eligible for relocation. The stated salary range is $86,800–$165,200.

Requirements

  • A bachelor’s degree in science, technology, engineering, or mathematics (STEM) and 5 years of prior relevant experience, or an advanced STEM degree.
  • Design, analysis, test, and/or simulation experience with at least one non-isolated converter topology: buck, boost, or buck-boost.
  • Experience using MATLAB, MathCAD, Mathematica, or similar tools.
  • Experience with analog or digital electronics design, including at least one of the following: FETs/BJTs, op-amps, high-/low-/band-pass filters, clock/data termination, or comparator circuits.
  • U.S. citizenship, as required for eligibility for a security clearance.
  • An active and transferable U.S. government-issued security clearance is required prior to the start date; ability to obtain an interim U.S. government-issued clearance is also stated as required prior to the start date.

Nice To Haves

  • An advanced degree in Electrical Engineering.
  • Robust design and analysis experience with analog or digital power converters, including flyback, half-bridge, full-bridge, forward, or push-pull topologies; conceptual familiarity and experience should include stability.
  • Conceptual familiarity with transformer and inductor design considerations in power-electronics circuits; professional experience is preferred.
  • Experience with circuit-card-assembly-level and/or system-level power-architecture trades, including power-converter specification development.
  • Experience guiding ECAD personnel through printed wiring board (PWB) layout of power circuitry and technical drawing creation.
  • Experience communicating and documenting technical topics at the small-team level.
  • Experience acting as a liaison between program and functional management in a cross-matrixed organization.
  • Experience with military specifications.
  • Experience with design considerations for voltages above 400 V and/or power above 10 kW, three-phase power systems, power-factor control, or inverter/rectifier development.
  • Experience with program-management tools such as Earned Value.
  • Proposal-development experience.
  • Experience with circuit simulator SIMPLIS, system simulator SABER, and/or analysis tool Mathcad.
  • Experience with Mentor Graphics DxDesigner and/or Hyperlynx.

Responsibilities

  • Design, analyze, simulate, test, and document power-conversion and related analog circuitry, primarily non-isolated and isolated switch-mode power converters and linear converters for board-mounted applications.
  • Architect circuit-card-level power schemes and develop related requirements.
  • Support circuit-card development through its design phases, from requirements definition through initial integration testing.
  • Drive schedule concerns and define schedules for circuit-level tasking.
  • Guide ECAD drafters through layout and routing activities, with moderate support from senior engineers.
  • Assist in defining layer stackups.

Benefits

  • Medical insurance
  • Dental insurance
  • Vision insurance
  • Life insurance
  • Short-term disability
  • Long-term disability
  • 401(k) match
  • Flexible spending accounts
  • Flexible work schedules
  • Employee assistance program
  • Employee Scholar Program
  • Parental leave
  • Paid time off
  • Holidays
  • Annual short-term and/or long-term incentive compensation may be available, depending on position level and collective-bargaining coverage.
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service