Senior Fabricator/Pipe Welder

APTIM•Findlay, OH
•$32 - $35•Onsite

About The Position

The Senior Fabricator independently fits, welds, assembles, tests, and supports the fabrication and assembly of process equipment manufactured by LFG Specialties, an OEM specializing in landfill gas compliance and processing equipment, including flares, evaporators, and gas handling systems. The role requires advanced pipe fitting and welding on carbon steel, 304 and 316 stainless steel, and carbon-to-stainless dissimilar-metal joints using approved WPSs for SMAW, GTAW, and GMAW. Nearly all work is performed in the Findlay fabrication shop, with limited field installation and repair assignments. The position includes fabricating pipe spools, structural assemblies, and tanks; operating shop equipment after required training; conducting and documenting pressure tests; preparing work for inspection; and supporting quality records and material traceability. The role also includes occasional field measurements, as-built redlines, final fit-up, mentoring junior employees, and following released drawings, approved procedures, quality requirements, and safety rules. The regular schedule is Monday through Thursday, 6:00 a.m. to 4:30 p.m. Overtime may be required, and overnight travel occurs a few times per year for assignments that may last one to two weeks. Candidates must pass employer-required 2G and 6G weld tests before an employment offer is made. The stated pay range is $32.00–$35.00 per hour, dependent on relevant factors.

Requirements

  • High school diploma, GED, or an equivalent combination of education and relevant experience.
  • At least five years of progressive fabrication, pipe fitting, and pipe welding experience.
  • Demonstrated proficiency with SMAW, GTAW, and GMAW processes.
  • Experience fitting and welding carbon steel and 304 or 316 stainless steel, including carbon-to-stainless dissimilar-metal joints.
  • Ability to fit and weld NPS 1-1/2 through NPS 36 pipe, including Schedule 10S and STD or Schedule 40, in fixed positions and on a positioner.
  • Advanced ability to read fabrication drawings, isometrics, P&IDs, bills of materials, tolerances, WPSs, and inspection requirements.
  • Working knowledge of stainless-steel purge practices, weld preparation, joint fit-up, weld sequencing, distortion control, dimensional inspection, and pressure-test documentation.
  • Ability to conduct hydrostatic testing with supervisor guidance and prepare work for inspection and NDE.
  • Ability and willingness to operate a plasma table, plate-forming equipment, positioners, and related shop equipment after required training.
  • Ability to mentor less-experienced employees while maintaining production, quality, and safety expectations.
  • Valid driver's license and ability to travel for occasional field assignments lasting one to two weeks.
  • Ability to satisfy applicable background screening, drug testing, client badging, and site-access requirements in accordance with company policy and applicable law.
  • Successful completion of employer-required 2G and 6G performance qualification tests using applicable company WPSs qualified in accordance with ASME Section IX; testing includes visual examination and bend testing.
  • Ability to work primarily in an industrial fabrication shop and occasionally at outdoor or active industrial field sites.
  • Ability to stand and walk for extended periods and regularly reach, grasp, handle tools and materials, bend, stoop, kneel, and crouch; work may include prolonged kneeling or crouching and occasional climbing, balancing, and crawling.
  • Ability to occasionally lift and carry up to 50 pounds and use team lifting or approved mechanical handling equipment for heavier, bulky, or awkward loads.
  • Ability to work at elevation and use ladders, platforms, scaffolds, or personal fall-protection systems after required training and authorization.
  • Ability to enter confined spaces when assigned, trained, authorized, and covered by the applicable entry procedure.
  • Ability to wear a respirator when required after medical evaluation, fit testing, and training.
  • Ability to work around welding arc radiation, sparks, hot surfaces, sharp edges, moving equipment, noise, dust, welding fumes, shielding gases, and variable temperatures.
  • Ability to work outdoors during occasional field assignments in heat, cold, wind, precipitation, and other site conditions.
  • Ability to wear required PPE, which may include a welding helmet, safety glasses, face shield, hearing protection, protective clothing, gloves, safety-toe footwear, fall protection, and respiratory protection.
  • Ability to work the regular Monday-through-Thursday schedule from 6:00 a.m. to 4:30 p.m., work overtime when required, and travel overnight a few times per year for assignments that may last one to two weeks.
  • Ability to comply with Job Hazard Analyses, Lockout Tagout, hot-work permits, fire-watch requirements, confined-space procedures, fall-protection requirements, respiratory-protection requirements, and site-specific rules.
  • Ability to complete company-provided training for hot work, confined-space entry, fall protection, respiratory protection, forklifts, overhead cranes, rigging, plasma-table operation, and plate-forming equipment as assigned.
  • Ability to use correct material and filler-metal identification and assist with traceability, weld mapping, inspection, test records, and nonconformance documentation.
  • Ability to follow approved WPSs and released requirements and not change weld variables, materials, joint details, or dimensions without approval.

Nice To Haves

  • Previous welder performance qualifications and experience in an ASME code-controlled fabrication environment.
  • Experience supporting pressure-vessel fabrication under ASME Section VIII and process-piping fabrication under ASME B31.3.
  • Experience following ASME Section IX WPSs and supporting welder qualification, weld traceability, and inspection documentation.
  • Experience operating a 4-roll plate-forming machine capable of rolling plate up to 10 feet wide and 1/2 inch thick.
  • Previous experience with plasma-table operation, overhead cranes, forklifts, rigging, and material handling.
  • Field installation, repair, measurement, and final fit-up experience on industrial equipment.
  • Previous welder performance qualifications or certifications; these do not replace the company-required weld tests.

Responsibilities

  • Interpret fabrication drawings, assembly drawings, isometric sketches, P&IDs, bills of materials, engineering specifications, WPSs, and quality documents.
  • Lay out, measure, mark, cut, bevel, fit, tack, and weld pipe and fabricated components to released drawings, specified tolerances, and approved procedures.
  • Fit and weld NPS 1-1/2 through NPS 36 pipe, including Schedule 10S and STD or Schedule 40, in fixed positions and on welding positioners.
  • Perform SMAW, GTAW, and GMAW on carbon steel, 304 and 316 stainless steel, and qualified carbon-to-stainless dissimilar-metal joints using specified filler metals and required handling controls.
  • Perform stainless-steel purge welding and apply weld sequencing and fit-up practices to control heat input, distortion, and dimensional change.
  • Fabricate and assemble pipe spools, structural assemblies, and tanks for the facility’s product lines.
  • Set up and operate the plasma table after required training.
  • Operate plate-rolling and forming equipment, including the 4-roll machine, after training and demonstration of safe operation.
  • Conduct and document pneumatic or hydrostatic tests in accordance with approved procedures, with supervisor guidance.
  • Prepare welds and assemblies for inspection and assist qualified inspection personnel with visual testing, liquid penetrant testing, and other required NDE activities.
  • Assist with weld maps, shop travelers, material traceability, heat-number records, material test reports, filler-metal control records, pressure-test records, and other quality documentation.
  • Take field measurements, prepare accurate as-built redlines, and perform final fit-up during occasional field installation or repair assignments.
  • Identify fabrication conflicts or value-engineering opportunities and obtain approval from engineering and quality personnel before changing released requirements.
  • Mentor junior fabricators and welders and provide constructive technical guidance while maintaining production, quality, and safety expectations.
  • Follow approved procedures, released drawings, inspection hold points, supervisor or quality direction, and applicable safety and site requirements.
  • Inspect fit-up and completed work for dimensional accuracy and visible defects, protect finished components, maintain an orderly work area, and care for assigned tools and equipment.
  • Stop work when equipment, conditions, or instructions create an uncontrolled hazard or quality risk.

Benefits

  • Medical insurance
  • Vision insurance
  • Dental insurance
  • Company-paid and optional life insurance
  • Short-term disability insurance
  • Long-term disability insurance
  • Accident coverage
  • Critical illness coverage
  • Hospital indemnity coverage
  • Paid holidays
  • Vacation
  • Sick leave
  • 401(k) plans
  • Investment in personal and professional development
  • Respect and flexibility to live a full life at work and at home
  • Opportunity to contribute to improving the company
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service