Senior Control Systems Engineer

Pride Mobility & Quantum Rehab•Duryea, PA

About The Position

Research, develop, integrate, and improve proof-of-concept and production embedded electronic control systems for CAN-based complex rehabilitation electric power wheelchairs, following Pride’s procedures and protocols and supporting continuous improvement within Research & Development. This is a safety-sensitive position. The role works across control systems, embedded firmware, sensing, communications, prototyping, and verification, with collaboration across Pride departments and external design partners, component manufacturers, and suppliers. Domestic or international travel may be needed. Pride may modify duties or assign other duties as necessary.

Requirements

  • At least 5 years of experience developing embedded control systems, electronic systems, robotic systems, electric vehicles, medical devices, industrial equipment, or other complex electromechanical products.
  • At least 5 years of hands-on experience developing, integrating, and testing embedded firmware, sensors, communications, and closed-loop control algorithms.
  • Bachelor’s degree in Electrical Engineering, Controls Engineering, Mechatronics Engineering, Computer Engineering, Robotics Engineering, Systems Engineering, or a related technical discipline.
  • Must be legally authorized to work in the United States without sponsorship now or in the future.
  • Must be a self-starter, creative team player, friendly, professional, detail-oriented, and honest.
  • Ability to multitask, problem-solve, and prioritize in a fast-paced working environment.
  • Ability to model, simulate, analyze, and troubleshoot complex closed-loop electromechanical systems.
  • Ability to use electrical and software development tools, including multimeters, oscilloscopes, logic analyzers, CAN analyzers, debuggers, soldering equipment, and standard hand tools.
  • Ability to read and comprehend moderately complex work instructions, electrical schematics, data sheets, communications specifications, and system requirements.
  • Ability to prepare and build prototypes.
  • Ability to communicate complex technical concepts through specifications, reports, presentations, and design reviews.
  • Strong working knowledge of discrete-time state-space control-system design.
  • Strong working knowledge of stochastic filtering, sensor fusion, state estimation, and observer design.
  • Strong working knowledge of mechatronics analysis and simulation using closed-loop sensory feedback.
  • Strong working knowledge of multi-rate digital signal processing, image processing, sampling theory, filtering, and transforms.
  • Strong working knowledge of MEMS, GMR, and ToF-based sensing devices.
  • Strong working knowledge of communication protocols, including CANopen, SAE J1939, I2C, and SPI.
  • Strong working knowledge of bare-metal embedded electronics and firmware design using C and/or C++.
  • Working knowledge of ISM-band wireless communications and protocols, including BLE, Wi-Fi, and LoRa.
  • Working knowledge of control-system modeling and simulation tools such as MATLAB, Simulink, Stateflow, Python, or equivalent.
  • Working knowledge of software GUI development for engineering, diagnostic, configuration, or test applications.
  • Strong working knowledge of 8-, 16-, and 32-bit microcontrollers and SoCs.
  • Strong working knowledge of Microsoft Word and Excel.
  • Must demonstrate a strong drive for advancement and continuous improvement and have excellent presentation, verbal, and written communication skills.

Nice To Haves

  • Master’s degree in Electrical Engineering, Controls Engineering, Robotics, Mechatronics Engineering, or a related technical discipline.
  • Advanced working knowledge of model-based design, system identification, Kalman filtering, extended Kalman filtering, and robust control techniques.
  • Advanced working knowledge of hardware-in-the-loop and software-in-the-loop simulation.
  • Advanced working knowledge of FMEAs, hazard analysis, and safety-related embedded systems.
  • Advanced working knowledge of embedded Linux, real-time operating systems, and heterogeneous embedded-computing platforms.
  • Experience with Jetson, ROS2, and Gazebo simulator platforms.
  • At least 7 years of experience developing embedded control systems and electronic assemblies.
  • At least 1 year of experience with cameras, radar, LiDAR, ultrasonic sensors, or other environmental-perception technologies.
  • At least 1 year of experience with electric vehicles, robotics, mobile platforms, traction control, or medical-device systems.
  • At least 1 year of experience developing products through proof-of-concept, prototype, verification, validation, and production phases.
  • At least 1 year of hands-on technical experience in an environment supporting design, manufacturing, technical service, and technical processes.
  • Current or previous successful employment with Pride Mobility Products Corporation.
  • Ability to push, pull, or lift 40 pounds.

Responsibilities

  • Design, model, simulate, implement, and validate closed-loop control systems for complex rehabilitation electric power wheelchairs.
  • Develop discrete-time state-space models, control algorithms, observers, and state-estimation methods for vehicle motion and electromechanical functions.
  • Develop stochastic filtering and sensor-fusion models using inertial, position, velocity, distance, environmental, and vehicle-state data.
  • Perform mechatronics analysis and simulation using closed-loop sensory feedback.
  • Develop multi-rate digital signal and image-processing algorithms, filters, sampling methods, and transforms.
  • Evaluate and integrate MEMS, GMR, ToF, and other sensing technologies.
  • Develop bare-metal embedded firmware for microcontrollers, SoCs, and real-time electronic systems.
  • Develop and support CAN communications, including CANopen, SAE J1939, and proprietary CAN protocols.
  • Support wireless communications in ISM bands, including BLE, Wi-Fi, and LoRa.
  • Develop software and GUI support for configuration, calibration, diagnostics, data acquisition, and testing.
  • Develop proof-of-concept electronics and software to evaluate control architectures, sensors, communications technologies, and product features.
  • Translate product and system requirements into control-system, embedded-software, sensing, and communications requirements.
  • Develop system architectures, functional block diagrams, interface control documents, state diagrams, algorithms, and design specifications.
  • Perform inspections, verification, validation, bench, subsystem, vehicle, and field testing.
  • Analyze test data and perform root-cause analysis of control instability, sensor errors, communication problems, timing issues, and system-level defects.
  • Ensure designs are safe, effective, manufacturable, and reliable, and meet SPARC initiatives.
  • Meet project timelines and budgets.
  • Serve as a technical resource for outside design partners, component manufacturers, and suppliers.
  • Assist in continuous improvement of design procedures and protocols to improve design efficiency.
  • Observe safety and security rules and promptly report accidents, incidents, and injuries to management.
  • Complete Annual CTPAT Security Training.
  • Focus on continuous improvement and demonstrate good business judgment.
  • Work effectively with Pride departments to exceed internal and external expectations.
  • Travel domestically or internationally as needed.
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service