CF-Quality Inspector

Great Dane • Terre Haute, IN

2d • Onsite

About The Position

Perform quality control inspection activities at various points in the production process. The incumbent is expected to be knowledgeable and to perform QC activities in all specific areas, such as: fabrication and trailer set-up, general assembly, final assembly inspection of all trailers, and final approval of all trailers. Inspectors must be familiar with all phases of trailer design and construction (dimensions, welds, equipment, and acceptability standards). Quality Inspector I performs assigned QC area audits (materials, in process, finished product, etc.) to ensure each trailer meets established quality standards for structural integrity, functionality, and appearance. Completes QC checklists identifying items to be corrected prior to release from production. Reports deviations from acceptable QC levels or developing trends to QC Manager and manufacturing personnel. Informs the manufacturing supervisor responsible of problems so that possible corrective action can be initiated during the manufacturing process. Makes final unit assessment of conformance to company quality standards and individual order specifications. Prepares required trailer documentation (DOT-FHWA forms) for distribution. Participates in problem solving team activities including defect cause analysis and prevention. Executes process for non-conforming material areas. Updates Built-In Quality (BIQ) Gate KPI board(s) and logs appropriate data into RFGen. Performs Critical Audits/ Layered Process Audits consistently per schedule. Performs other routine duties as needed/assigned. Quality Inspector II has capabilities to perform all responsibilities identified under Quality Inspector I. Trained in all BIQ Gates in respective area, including End-Of-Line (EOL) where applicable. Quality Inspector III has capabilities to perform all responsibilities identified under Quality Inspector I and II. Performs detailed Yard Audits per Yard Audit and Multipoint Audit Checklist and reports findings. Acts as back-up for Quality Team Lead. Supports vendor visits when applicable.

Requirements

• Ability to identify and resolve problems in a timely manner.
• Ability to work well in a group problem-solving situation.
• Solicits internal customer feedback to improve service.
• Inspire and motivate others to perform well; assist in training of new employees as needed.
• Look for ways to improve and promote quality; demonstrate accuracy and thoroughness.
• Employee must look for potential cost savings in the work process, help keep scrap and waste to a minimum and be efficient in use of all supplies.
• The employee must perform the assigned tasks in a way they meet or exceed the required production level.
• Minimum of 3 years in manufacturing environment.
• Ability to accurately read a tape measure and other measuring tools.
• Ability to work with hands and to work in mechanically oriented situations following supervisor’s instruction.
• Aptitude to learn and retain latest information.
• Ability to follow instructions, given either verbally or in writing.
• Ability to read welding and/or engineering drawings.
• Ability to document written information accurately.
• Ability to communicate effectively in English.
• Ability to stand and move about on concrete 8-12 hours a day.
• Ability to see, walk, bend, reach, grasp, stoop, kneel, twist, crawl, carry, climb (including ladders), work overhead, push and pull.
• Ability to do heavy lifting (up to 50 pounds) multiple times daily in an 8-to-12-hour shift.
• Ability to maneuver large parts and assemblies (up to 180 pounds) by pushing, pulling, and flipping them into place.
• Ability to work in a constant state of alertness.
• Employees must wear all mandated PPE which includes at least protection for the eyes, ears, hands, head, body, and feet.

Nice To Haves

• Experience in welding is a plus.

Responsibilities

• Perform quality control inspection activities at various points in the production process.
• Perform QC activities in all specific areas, such as: fabrication and trailer set-up, general assembly, final assembly inspection of all trailers, and final approval of all trailers.
• Perform assigned QC area audits (materials, in process, finished product, etc.) to ensure each trailer meets established quality standards for structural integrity, functionality, and appearance.
• Complete QC checklists identifying items to be corrected prior to release from production.
• Report deviations from acceptable QC levels or developing trends to QC Manager and manufacturing personnel.
• Inform the manufacturing supervisor responsible of problems so that possible corrective action can be initiated during the manufacturing process.
• Make final unit assessment of conformance to company quality standards and individual order specifications.
• Prepare required trailer documentation (DOT-FHWA forms) for distribution.
• Participate in problem solving team activities including defect cause analysis and prevention.
• Execute process for non-conforming material areas.
• Update Built-In Quality (BIQ) Gate KPI board(s) and log appropriate data into RFGen.
• Perform Critical Audits/ Layered Process Audits consistently per schedule.
• Perform detailed Yard Audits per Yard Audit and Multipoint Audit Checklist and report findings.
• Back-up for Quality Team Lead.
• Support vendor visits when applicable.
• Inspect all trailers as assigned according to quality standards and look for ways to improve upon those standards.
• Observe all safety and security procedures; participate in Safety Committee and activities as requested; look for ways to improve upon safety within the work area.

Benefits

• Competitive compensation
• Benefits include dental, vision, and medical with employer contributions.
• Retirement programs, including a Pension Plan and 401(k) Plan with employer match.
• Tuition Reimbursement
• Paid holidays and vacation

What This Job Offers

• Job Type: Full-time
• Career Level: Mid Level
• Education Level: No Education Listed