Hand Solder 1

Celestica • Maple Grove, MN

4d • Onsite

About The Position

Operate soldering equipment such as solder wave, vapor degreaser machine, selective solder, air vac lead free and leaded solder pots, SRT rework station and special parts preparation equipment. Solders, cleans, rework and fabricates parts, components and subassemblies by using scopes and basic hand tools and special devices for the production of components and assemblies.

Selects flux, adds flux, cleans equipment, maintains and follows pm schedules, responsible for identifying when maintenance is needed for wave solder pallets. Sets up wave height, width and conveyor speed on wave solder equipment. Responsible for setting up and following all guidelines and pm’s for selective soldering machine. These settings should ensure that each job is able to produce a quality product on a timely basis per print and routings. Must review routings against prints to insure consistency. Ensure correct programs and revisions are called out on routers. Periodic hand soldering under a scope is required for solder touch up and product review of solder joints. Uses basic hand tools, special fasteners, soldering iron and measuring devices. May be required to measure and record product data. Maybe trained in surface mount equipment, and be responsible for the monitoring of floor stock inventory such as solder paste and flux and informing Supervisor or Lead when low. Will perform hand soldering work while using a scope. Prepares wire by cutting, stripping, twisting, tinning and solders, or fastens wires, cables, resistors, capacitors and other parts and components to pwb’s, connectors, and assemblies. Cleans parts and hand placed components during production processes.

Requirements

• Able to fabricate, and inspect to J STD 001 and IPC-610.
• Experience reading blueprints and working with scopes in a manufacturing setting.
• Solder experience in manufacturing setting including hand soldering and related machine soldering on solder equipment.
• Must pass J-STD-001 and IPC-A-610 Certification to be qualified to perform the job duties of a Solder.
• Follow oral and written instructions.
• Must be able to read blueprints.
• Perform job functions while using a scope.
• Work will involve repetitive hand motion when performing hand soldering.
• Hand soldering is performed in a sitting position; machine soldering functions may require standing, twisting and stooping positions.
• Job duties require working with and around chemicals.
• Visual exams are required pre-hire and biennial to confirm visual acuity of 20/20 with or without glasses along with passing a standard color vision exam.

Nice To Haves

• Experience reading blueprints and working with scopes in a manufacturing setting a plus.
• Solder experience in manufacturing setting including hand soldering and related machine soldering on solder equipment a plus.

Responsibilities

• Operate soldering equipment such as solder wave, vapor degreaser machine, selective solder, air vac lead free and leaded solder pots, SRT rework station and special parts preparation equipment.
• Solder, clean, rework and fabricate parts, components and subassemblies by using scopes and basic hand tools and special devices for the production of components and assemblies.
• Select flux, add flux, clean equipment, maintain and follow pm schedules, and identify when maintenance is needed for wave solder pallets.
• Set up wave height, width and conveyor speed on wave solder equipment.
• Set up and follow all guidelines and pm’s for selective soldering machine to ensure quality product production on a timely basis per print and routings.
• Review routings against prints to ensure consistency.
• Ensure correct programs and revisions are called out on routers.
• Perform periodic hand soldering under a scope for solder touch up and product review of solder joints.
• Use basic hand tools, special fasteners, soldering iron and measuring devices.
• Measure and record product data.
• Monitor floor stock inventory such as solder paste and flux and inform Supervisor or Lead when low.
• Prepare wire by cutting, stripping, twisting, tinning and soldering, or fastening wires, cables, resistors, capacitors and other parts and components to pwb’s, connectors, and assemblies.
• Clean parts and hand placed components during production processes.

Benefits

• Equal employment opportunity
• Prohibits discrimination based on race, color, creed, religion, national origin, gender, sexual orientation, gender identity, age, marital status, veteran or disability status, or other characteristics protected by law.
• Retaliation against a person who files a charge of discrimination, participates in a discrimination proceeding, or otherwise opposes an unlawful employment practice will not be tolerated.
• All information will be kept confidential according to EEO guidelines.

What This Job Offers

• Job Type: Full-time
• Career Level: Mid Level
• Education Level: High school or GED