Production Bagger

Idaho Pacific Holdings•Rigby, ID

3d•Onsite

About The Position

Major duties of the Production Bagger include bagging finished product and stacking the bagged product onto pallets. Will observe scale readings and ensure bag weight accuracy on every bag; verify the use of correct bags and labels; verify all code dates are legible and accurate, bag seals are secure and the correct quantity of bags is placed on each pallet. This is a very physical, hands-on position requiring constant and repetitive lifting up to 70 pounds, above shoulder height.

Requirements

Familiarity with the potato dehydration process helpful.
Must be able to closely follow operational instructions.
Ability to communicate effectively.
Must be able to read and write legibly in English.
Ability to read scales and equipment used for weighing or measuring.
Good attention to detail.
Will be required to stand, bend, or move repetitively for up to 12 hours.
Must be able to lift on a regular basis up to 70 pounds above shoulder height.
Able to tolerate dust or chemicals.
Must not be affected by moving equipment and machinery.
Bending, stretching, lifting, reaching, climbing, crawling, and crouching as required.
Must be available all days and all hours.

Responsibilities

Set empty product bag for filling.
Lift or slide the bagged product onto the scale.
Slide and/or lift the bagged product through the heated glue sealer.
Visually align the bag so it seals correctly.
Ensure all markings on product bags are legible.
Physically lift (using proper lifting techniques) the bagged product off the conveyor and stacks them on the pallet according to customer and company specifications.
Ensure bags, labels, stickers and printouts are correct and neatly adhered.
Work with the Line Lead or appropriate personnel to check and/or change magnets as scheduled.
Take product samples to the Lab as needed.
Visually inspect the product in the bag (before sealing) and the product in totes for any defects, foreign material, or other potential issues.
Understand and follow metal detector procedures and policy.
Immediately report problems to the Shift Manager.
Clean up all spills, and keep areas of work free of debris and potential hazards.
Use caution around moving parts and equipment.
Keep areas of responsibility clean and well maintained during shift hours, and ensure area is clean for the next shift.
Comply with all safety regulations; follow all plant and safety policies.
Follows all company and regulated good manufacturing practices.
Completes all other responsibilities as necessary.