Process Engineer

Neuralink•Fremont, CA
•Onsite

About The Position

Neuralink is creating devices that enable a bi-directional interface with the brain. The BI Microfab group fabricates flexible polymer electrode arrays for neural interface devices in an internal cleanroom, managing processes such as photolithography, thin-film deposition, etching, polymer integration, metrology, and quality control. The group collaborates with hardware design, clinical operations, and quality engineering to develop robust production workflows for implants. The Process Engineer owns assigned fabrication modules and ensures their operational stability, capability, and continuous improvement. The role combines hands-on wafer processing in a cleanroom with data analysis and cross-functional hardware collaboration. It includes monitoring process health, troubleshooting failures, improving yield and throughput, and integrating equipment from initial setup through production release. The position is 100% on-site and may require periodic travel for equipment qualification, vendor evaluations, or specialized training. The engineer must be able to work for multi-hour shifts in a full cleanroom suit, work safely with hazardous chemicals and process gases, and provide off-shift, weekend, or extended coverage during tool outages and high-priority build cycles. The anticipated base salary range is $74,000–$123,000 USD. Full-time employees are eligible for equity compensation in the form of RSUs and the listed benefits.

Requirements

  • Bachelor’s degree in Materials Science, Chemical Engineering, Electrical Engineering, Mechanical Engineering, Physics, or an equivalent technical discipline.
  • Demonstrated engineering capability and practical execution across technical domains.
  • At least 2 years of direct process or manufacturing engineering experience in a high-complexity environment such as semiconductor, MEMS, aerospace, or automotive; alternatively, an advanced degree (MS/PhD) supported by extensive fabrication research.
  • Ability to identify microfabrication failure modes, diagnose root causes systematically, and implement permanent corrective measures.
  • Experience evaluating nonconforming material and conducting formal root-cause investigations, such as 5 Whys, Fishbone diagrams, or 8D, through quality actions such as NCR and CAPA.
  • Practical mastery of DOE, SPC, and process capability analytics such as Cp/Cpk, and ability to use line metrics to inform engineering decisions.
  • Ability to own process modules, manage competing operational priorities, and communicate technical findings to cross-functional teams.
  • Proficiency writing and revising controlled manufacturing documents, including SOPs, process specifications, and work instructions, using change management and Good Documentation Practices.
  • Strong written and verbal communication skills for explaining complex technical data to technicians, engineers, and leadership.
  • Adaptability in fast-paced operations and ability to handle multiple technical tasks.
  • Ability to work for multi-hour shifts in a full cleanroom suit.
  • Ability to work safely with hazardous chemical reagents and process gases while following PPE and laboratory protocols.
  • Flexibility to provide off-shift, weekend, or extended coverage during tool outages and high-priority build cycles.
  • Willingness to travel periodically for equipment qualification, vendor evaluations, or specialized training.
  • Ability to work on-site 100%.

Nice To Haves

  • Practical MEMS or micro/nanofabrication experience across core modules such as photolithography, thin-film deposition, or plasma etching.
  • Experience operating in-line metrology instruments such as stylus profilometry, spectroscopic ellipsometry, or four-point resistivity measurement.
  • Experience with high-resolution analytical characterization and failure diagnostics using SEM, FIB cross-sectioning, EDS, or XPS.
  • Knowledge of regulated production environments, GMP standards, or formal Quality Management Systems such as FDA QMSR 21 CFR Part 820, ISO 13485, or ISO 9001.
  • Master’s or Ph.D. in Materials Science, Microelectronics, Physics, Bioengineering, or an equivalent technical field.
  • Experience scoping, scheduling, and independently driving parallel engineering efforts to completion while communicating status, milestones, and technical risks.
  • Proficiency with CAD tools such as SolidWorks for tooling and fixture design, and photomask drafting software such as KLayout or L-Edit.
  • Familiarity with Manufacturing Execution Systems (MES), electronic device tracking records, and controlled document management systems.
  • Experience leading cleanroom equipment through installation, formal qualification protocols, and release to production.

Responsibilities

  • Manage assigned fabrication modules, including photolithography, thin-film deposition, plasma etching, and polymer coating and curing; maintain recipes, operating specifications, and documentation.
  • Implement Statistical Process Control protocols, monitor wafer metrics, and conduct in-line metrology to address out-of-control conditions.
  • Lead root-cause investigations into process excursions and yield losses, applying first-principles analysis, implementing countermeasures, and verifying lasting resolution.
  • Improve line yield, cycle times, coating uniformity, and operating costs through experimental design and statistical evaluation.
  • Lead equipment bring-up, including requirements specification, vendor evaluation support, IQ/OQ/PQ execution, and development of production recipes.
  • Develop and characterize new microfabrication processes and transfer mature recipes into production workflows.
  • Author SOPs, manufacturing travelers, process specifications, PFMEAs, and change controls in accordance with medical-device quality regulations.
  • Train cleanroom technicians and work with equipment engineering to improve tool reliability and preventive maintenance schedules.
  • Collaborate with R&D, quality engineering, and assembly teams to translate implant performance targets into DFM guidelines and process criteria.

Benefits

  • Equity compensation in the form of Restricted Stock Units (RSUs) for full-time employees.
  • Medical, dental, and vision insurance through a PPO plan.
  • Paid holidays.
  • Commuter benefits.
  • Meals provided.
  • 401(k) plan; interns are initially excluded until they work 1,000 hours.
  • Parental leave.
  • Flexible time off.
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service