Plant Process Engineer

TRUCENT INC•Van Wert, OH
•Onsite

About The Position

The Plant Process Engineer owns the performance of the Van Wert renewable chemical process, keeping it safe, reliable, and efficient while leading projects that support its growth. The role splits time between the control room, plant floor, and office, analyzing process data, troubleshooting equipment, and taking improvement and capital projects from concept through installation and startup. The position supports a continuous-process manufacturing operation that converts oils from agricultural products such as corn, soy, and other vegetable oils into specialty chemical compounds. It works closely with Operations, Maintenance, Quality, EHS, corporate engineering, vendors, contractors, and plant leadership on process performance, safety, reliability, compliance, and product development. The working environment includes both an office and an operating chemical plant, with potential exposure to noise, heat, cold, dust, and process chemicals. Required PPE includes FR clothing, safety glasses, a hard hat, steel-toe boots, and hearing protection; respirator use may be required. The role requires climbing stairs and ladders, working at heights, entering permitted confined spaces, and lifting up to 50 pounds. Occasional evening, weekend, and holiday work may be needed during startups, turnarounds, and upsets. Travel is limited to under 10%.

Requirements

  • Bachelor's degree in Chemical Engineering or a closely related engineering discipline.
  • 5–7 years of engineering experience in a chemical, refining, biofuels, or other continuous-process manufacturing plant.
  • At least 3 years leading process improvement projects with measurable results.
  • Working knowledge of unit operations, heat and material balances, and equipment sizing calculations.
  • Ability to read, create, and redline P&IDs, PFDs, and engineering drawings.
  • Proficiency with AutoCAD or similar drafting software.
  • Experience with MOC, PHA/HAZOP, and OSHA PSM requirements.
  • Strong hands-on troubleshooting skills and willingness to spend significant time on the plant floor.
  • Proficiency in Microsoft Excel and data analysis.
  • Authorization to work in the United States.

Nice To Haves

  • Experience in renewable chemicals, biofuels, oleochemicals, or bio-based processing.
  • Professional Engineer (PE) license or EIT certification.
  • Experience with process simulation tools such as Aspen Plus/HYSYS or CHEMCAD and plant historians such as PI.
  • Familiarity with DCS/PLC control systems and control loop tuning.
  • Lean Six Sigma Green Belt or higher.
  • Project management experience with capital projects over $250K.

Responsibilities

  • Monitor daily unit performance, including yield, throughput, product quality, energy use, and raw material use, and drive corrective action when KPIs drift.
  • Develop and maintain heat and material balances, process models, and operating envelopes for key unit operations.
  • Lead root cause analyses for yield losses, off-spec product, and recurring equipment issues using structured methods such as 5-Why, fishbone, and RCA.
  • Identify and implement continuous improvement projects to reduce cost per pound, increase capacity, and reduce waste and emissions.
  • Respond to process upsets as the first technical responder, diagnosing issues on the plant floor with operators and maintenance personnel.
  • Write and update standard operating procedures, operating limits, and startup and shutdown procedures.
  • Train operators on process fundamentals, new equipment, and procedure changes.
  • Provide on-call support for startups, shutdowns, turnarounds, and off-hours upsets.
  • Scope, justify, and execute capital and expense projects, including estimates, ROI, schedules, and vendor selection.
  • Size and specify process equipment, including pumps, heat exchangers, vessels, piping, and instrumentation, using engineering calculations.
  • Create and maintain P&IDs, PFDs, layouts, schematics, and as-built drawings, and check vendor and contractor drawings for accuracy.
  • Create and maintain equipment data sheets, specifications, and fabrication and assembly documents.
  • Coordinate plans, details, and specifications with vendors, contractors, and internal maintenance, and oversee installation, commissioning, and startup.
  • Own Management of Change (MOC) for process modifications and participate in PHA/HAZOP and pre-startup safety reviews.
  • Support Process Safety Management, OSHA, and EPA/Ohio EPA requirements, including air and water permit compliance and reporting.
  • Promote a strong safety culture through incident investigations, job safety analyses, and audits.
  • Use historian, DCS/PLC, and laboratory data to build trend analyses and performance reports for plant leadership.
  • Collaborate with Operations, Maintenance, Quality, EHS, and corporate engineering on reliability, quality, and product development initiatives.
  • Support scale-up and trials of new products or feedstocks within the Renewable Chemical Division.
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service