Painter (Wet Coat) - 1st Shift

MEC•Beaver Dam, WI

About The Position

The Painter (Wet Coat) applies powder or liquid paint to products, often parts moving on a production line, to achieve required film thickness and cosmetic standards for high-grade and decorative finishes. The role involves preparing surfaces, mixing coatings to specified color, consistency, and viscosity, and adjusting spray equipment to produce quality finishes economically. The painter may operate baking or drying ovens and an E-coat system, and is responsible for maintaining equipment and the work area in safe, clean working order. The employee must follow safety rules, wear required PPE, and handle, transfer, and label hazardous waste as covered in annual RCRA training.

Requirements

  • Ability to follow safety rules and use required PPE.
  • Knowledge of spray painting procedures, including gun distance, flow rates, air pressure, and overlap.
  • Understanding of gun, pump, and other equipment operation, with ability to make adjustments as trained.
  • Ability to mix coatings to specified color, consistency, and viscosity.
  • Ability to troubleshoot equipment.

Responsibilities

  • Follow all safety rules and wear required personal protective equipment.
  • Operate and make trained adjustments to guns, pumps, and other painting equipment to produce quality parts economically.
  • Follow paint application procedures, including gun-to-part distance, flow rates, air pressure, and overlap.
  • Clean and prepare surfaces for painting, as needed.
  • Mask parts and areas that are not to be coated.
  • Operate the E-coat system load control panel, as needed.
  • Select and mix coating liquid to the desired viscosity and specified color and consistency.
  • Perform scheduled preventative maintenance and troubleshoot equipment.
  • Rack work pieces on a conveyor; inspect parts; and transfer parts into and out of the department.
  • Pour coating liquid into spray containers and connect guns to air hoses, as needed.
  • Set up powder guns and regulate spray width and pressure using sprayer valves and nozzles.
  • Apply prime or finish coats by directing spray onto work surfaces.
  • Load and move materials to the work area.
  • Identify the proper paint using structure information.
  • Perform inventory transactions, as needed.
  • Maintain equipment and the work area in a safe, clean condition and working order.
  • Handle, transfer, and label hazardous waste in accordance with annual RCRA training.
  • Work overtime as needed.
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service