P&C Electrician C
About The Position
Perform work associated with the installation, operation, testing and maintenance of all protection and control devices and related equipment under direct, immediate or general supervision. • Such devices and equipment includes but is not limited to digital relays, electromechanical relays, intelligent electronic devices, Station Disturbance Recorders (SDR), digital fault recorders (DFR), oscillographs and event recorders, RTU's and station SCADA systems, statistical load metering, telemetering and transducers. • Install, maintain and operate all power line carriers (PLC), tone, pilot wire, fiber and associated P&C communications equipment. Respond to emergency call-outs and coordinate prompt restoration of service to customers as required. This list is not intended to limit assignment of work or the degree of supervision under all operating conditions. • Employee may perform miscellaneous, related, and incidental work in addition to that specifically outlined below. • The following reference is provided as a guideline for persons responsible for directing the duties and responsibilities of assigned personnel, to assist in the safety and development of employees, and is not intended to limit assignment of work or the degree of supervision under all operating conditions: o DIRECT SUPERVISION - When a qualified person is working with/hands-on with the person performing the designated task.IMMEDIATE SUPERVISION - When a qualified person is near the structure/equipment and is in constant visual and/or verbal contact to the person performing the designated task. o GENERAL SUPERVISION - An employee of equal or higher classification, knowledgeable of the task at hand and not necessarily at the job site. o QUALIFIED PERSON ' P&C Electrician or Supervisor who is knowledgeable of the task or work to be performed, and is capable of performing the appropriate emergency rescue. What We're Looking For: Education: Associate’s degree in electrical engineering technology, electronic technology, or related technology field. Experience: No previous work experience required. Must have the ability and desire to acquire the necessary knowledge and skills to perform the duties and/or responsibilities of the key job (P & C Electrician A) in this family and be qualified through demonstration, examination and/or performance appraisal as determined by the Company. Considerable travel and overtime may be required to complete work assignments. Must successfully complete Physical Abilities Test (PAT). Must live within 35 miles of the service location. License/Certification: Must possess and maintain a valid state driver’s license and must meet all vehicle operation requirements as designated by federal and/or state law.
Requirements
- Associate’s degree in electrical engineering technology, electronic technology, or related technology field.
- No previous work experience required.
- Must have the ability and desire to acquire the necessary knowledge and skills to perform the duties and/or responsibilities of the key job (P & C Electrician A) in this family and be qualified through demonstration, examination and/or performance appraisal as determined by the Company.
- Considerable travel and overtime may be required to complete work assignments.
- Must successfully complete Physical Abilities Test (PAT).
- Must live within 35 miles of the service location.
- Must possess and maintain a valid state driver’s license and must meet all vehicle operation requirements as designated by federal and/or state law.
- Amount of weight lifted from floor/ground to waist level: 60 pounds.
- Amount of weight to be carried for 20 feet: 50 pounds.
- Amount of weight lifted to chest level: 30 pounds.
- Amount of weight lifted to eye level: 30 pounds.
- Distance to walk accumulated over the course of an 8 hour shift: 1 mile.
- Distance in feet to climb and work on a ladder/structure: 20 feet and higher.
- Distance in feet to ascend to and work in a bucket/lift: 100 feet and higher (tested at 60 feet).
- Ability to discriminate between colors: Yes (tested).
Responsibilities
- Perform work associated with the installation, operation, testing and maintenance of all protection and control devices and related equipment under direct, immediate or general supervision.
- Install, maintain and operate all power line carriers (PLC), tone, pilot wire, fiber and associated P&C communications equipment.
- Respond to emergency call-outs and coordinate prompt restoration of service to customers as required.
Stand Out From the Crowd
Upload your resume and get instant feedback on how well it matches this job.
What This Job Offers
Job Type
Full-time
Career Level
Entry Level
Education Level
Associate degree
Number of Employees
5,001-10,000 employees
