#1712 | Non-Destruc Test Tech 2 - 1st Shift

ALL METALS PROCESSING OF ORANGE COUNTY LLC • Stanton, CA

10d • Onsite

About The Position

The primary responsibility of the Certified Non-Destruct Test Technician Level 2 is to test and inspect parts and assemblies for defects using automated and manual methods and techniques including radiography, ultrasound, penetrant, eddy current, laser shearography and magnetic particle.

Requirements

• Must be qualified to be certified as a Level 2 to NAS 410 in one or more of the following NDT Methods that will be utilized: Fluorescent Penetrant Inspection (FPI). Magnetic Particle Inspection (MPI).
• Certifications MUST be current.
• Ability to communicate, read, and understand English.
• Ability to read blue prints/drawings
• Ability to follow precise instructions.
• Ability to work around hazardous chemicals.
• Must have excellent hand/eye coordination.
• Ability to work well with others as part of a team.
• Able to multi-task and open to working overtime.
• Must demonstrate the ability to read the equivalent of the size and letters of the Jaeger I chart at a minimum distance of 12 inches and distinguish and differentiate the contrasts between colors illustrated on an Ishihara Test Chart.
• Inspection personnel shall be able to lift, carry, push, pull or otherwise move objects weighing up to 50 pounds.
• May work alone with minimal supervision or with other personnel.
• Inspection personnel shall possess fundamental written and verbal communication skills.
• Inspection personnel shall be fluent (written and verbal) in the English language.
• Computer skills, especially familiarity with MS Office applications, are necessary.
• Comfortable working in fast paced team environment.
• Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident).

Nice To Haves

• Preferred: 2 years of inspection related experience.

Responsibilities

• Adherence to safety procedures/guidelines at all times.
• Maintain safety precautions at all times.
• Keep work area in a clean and orderly condition.
• Perform specific inspections and specific evaluations for acceptance or rejection determinations according to written instructions and to record results.
• Perform NDT Examinations in conjunction with receipt and in-process inspections on material purchased for use in fabrication.
• Familiar with the tools and equipment and shall have demonstrated proficiency in their use.
• Capable of determining the calibration status of inspection and measuring equipment is in proper condition for use, and that inspection, examination and test procedures are approved.
• Capable of assisting production in the set-up of material and/or components for receipt inspection, as required.
• Train other individuals as required by management.

What This Job Offers

• Job Type: Full-time
• Career Level: Mid Level
• Education Level: High school or GED