New Product Introduction (NPI) Sourcing Manager, Data Center Power & Cooling

Anthropic

8d•$320,000 - $405,000•Hybrid

About The Position

Anthropic is building AI compute at a scale and pace that outruns what off-the-shelf data center equipment was designed for. Much of the power and cooling equipment behind our next campuses — battery energy storage systems (BESS), grid-forming and grid-following inverters, solid-state transformers (SST), E-STATCOM and other power-quality devices, medium-voltage switchgear, UPS, and liquid-cooling systems — is either new to the market, new to the supplier, or being built at a volume the supplier has never shipped before. The NPI Engineer owns the path from "the supplier has a design" to "the equipment is qualified, manufacturable at rate, and running reliably on site." You sit between our electrical and mechanical design teams, our supply chain and quality teams, and the supplier's engineering and factory organizations, and you make sure every new product or major variant clears the gates — EVT, DVT, PVT, FAT, SAT — before it is trusted with production load. This is a hands-on role: you will spend real time on supplier factory floors, in test labs, and at site commissioning.

Requirements

8+ years of engineering experience in power electronics, electrical equipment, or industrial energy systems, with at least 4 years in an NPI, product development, or product engineering role that owned a product from prototype through production ramp.
Direct, hands-on experience with at least two of: BESS, utility- or data-center-scale inverters, medium-voltage transformers or switchgear, UPS, STATCOM/power-quality equipment, or liquid cooling systems (CDUs, chillers, hydronics).
Working knowledge of the relevant standards and how they get applied in qualification: UL 9540/9540A, UL 1741 and IEEE 1547, IEEE 2800, IEC 62477 / IEC 62909, IEEE C37 and C57 series, NFPA 70/855, UL 1778, and comparable IEC equivalents.
Experience defining and executing structured qualification programs (EVT/DVT/PVT, FAT/SAT, type testing, reliability testing) and closing failures with disciplined root cause analysis and CAPA.
Familiarity with supplier factory environments — production lines, test bays, quality systems — and the ability to assess a supplier's real readiness to ship at rate.
Fluency in design-for-manufacturing and design-for-test principles and the supplier ECO/change-control process.
Strong systems thinking: you can reason about how an inverter, a battery, a transformer, and a cooling loop behave together at a site, not just in isolation.
Clear written and verbal communication, and comfort driving decisions across engineering, supply chain, and executive audiences.
A bachelor's degree in electrical, mechanical, or power engineering, or equivalent experience.
Willingness to travel 30–40% to supplier factories and data center sites, including internationally.

Nice To Haves

Experience with solid-state transformers, grid-forming inverters, E-STATCOM, or other emerging power-conversion equipment being introduced to data center or utility applications for the first time.
NPI or product engineering experience at a hyperscaler, a large utility-scale developer, or a Tier-1 power equipment OEM.
Background in grid interconnection studies, protection coordination, or power-system modeling (PSCAD, ETAP, PSS/E, or similar).
Liquid cooling product introduction experience — CDU, rear-door heat exchanger, direct-to-chip, or immersion systems.
Reliability engineering credentials (CRE, Six Sigma) or experience running HALT/HASS programs.
Firmware and controls validation experience for power conversion equipment (inverter control loops, BMS, EMS, PLC/SCADA integration).
Experience standing up or scaling new supplier manufacturing lines, including contract manufacturing and international sites.

Responsibilities

Own the NPI program for each new power or cooling product (BESS, inverters, SST, E-STATCOM, MV switchgear, UPS, CDUs, chillers) from concept selection through ramp, including the gate schedule, exit criteria, and risk register.
Drive early supplier design engagement: translate our site requirements (fault current, grid interconnection, harmonic and ride-through requirements, thermal envelopes, footprint, serviceability) into product requirements and specifications the supplier can build to, and negotiate trade-offs with their engineering teams.
Lead DFM/DFT/DFx reviews with suppliers so designs are manufacturable at the rate we need, testable in the factory, and serviceable in the field.
Plan and run prototype and pilot builds: define EVT/DVT/PVT scope and sample counts, witness builds, own test plans (type testing, HALT/HASS, thermal, EMC, protection coordination, functional and integration tests), and drive root cause and corrective action on every failure.
Qualify the product for deployment: define and execute first-article inspection, factory acceptance testing (FAT), site acceptance testing (SAT), and integrated system testing with the rest of the electrical and cooling chain, and sign off on production readiness.
Hand off to steady state: transfer qualified products, control plans, test procedures, and known-issue lists to the Manufacturing Quality and Supply Chain Delivery teams, and support them through the first production ramps.
Build the reliability picture: run FMEA/DFMEA with suppliers, define reliability targets and burn-in requirements, and feed field failure data back into the next revision.
Coordinate cross-functionally with design engineering, construction, commissioning, utilities/interconnection, safety, and sourcing so NPI schedules are integrated with campus delivery schedules.
Keep suppliers honest: track readiness and risk with clear metrics, escalate early, and hold technical reviews that resolve issues rather than admire them.