Mobile Building Engineer

Cushman & Wakefield•Ellabell, GA

6d•$31 - $37•Onsite

About The Position

Perform all plumbing, electrical, or HVAC requirements of the building(s). Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc. Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings. Verify field conditions and perform any necessary repairs or adjustments. Monitor Energy Management. Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property. Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.). Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices. Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris. Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management. Document and report activities to supervisor. Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns. Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits. Complete all required C&W Safety Training as scheduled annually. Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hours.

Requirements

Perform all plumbing, electrical, or HVAC requirements of the building(s)
Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.
Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings
Verify field conditions and perform any necessary repairs or adjustments
Monitor Energy Management
Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property
Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)
Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices. including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed.
Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps.
Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris
Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits.
Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management
Document and report activities to supervisor
Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns
Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits
Complete all required C&W Safety Training as scheduled annually
Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hours

Responsibilities

Perform all plumbing, electrical, or HVAC requirements of the building(s)
Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.
Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings
Verify field conditions and perform any necessary repairs or adjustments
Monitor Energy Management
Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property
Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)
Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices. including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed.
Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps.
Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris
Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits.
Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management
Document and report activities to supervisor
Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns
Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits
Complete all required C&W Safety Training as scheduled annually
Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hours