Manual Machinist

Qualdoc•Richmond, VA
•Onsite

About The Position

We are seeking an experienced Manual Machinist with a strong manufacturing background to set up and operate manual milling and turning equipment. This is a hands-on machining position, not a machine operator role. The ideal candidate can independently interpret technical drawings, select and install tooling, adjust machine settings, troubleshoot machining issues, and produce precision parts that meet required measurements and tolerances. The position is in an indoor manufacturing environment that is approximately 95% indoors and 5% outdoors. The facility is heated during winter but does not have air conditioning during summer. The role requires standing on concrete floors for at least eight hours per shift and may involve kneeling, squatting, bending, and standing for extended periods. Noise levels may occasionally increase near grinding and machine-testing areas; earplugs are provided when needed. The worker must provide basic personal hand tools, including box, open-end, and socket wrench sets; an Allen wrench set; a screwdriver set; tap handles; pliers; a combination square; a 9-inch level; and a tape measure. Both English and metric tool sets are recommended, as is a lockable toolbox. Safety glasses and steel-toed safety shoes are required, along with long pants and a sleeved shirt that is at least short-sleeved.

Requirements

  • CNC certification is required.
  • Strong background in manufacturing and machining.
  • Experience setting up and working with mills and lathes.
  • Ability to read and interpret blueprints, engineering drawings, and technical specifications.
  • Knowledge of machining tools, controls, instrumentation, and tooling.
  • Understanding of GD&T and dimensional measurements.
  • Ability to perform basic mathematical calculations, including geometry and trigonometry.
  • Strong attention to detail, sound judgment, and problem-solving abilities.
  • Good verbal communication and technical skills.
  • Ability to identify process improvements and work independently.
  • Ability to stand on concrete floors for at least eight hours per shift.
  • Ability to kneel, squat, bend, and stand for extended periods.
  • Must provide basic personal hand tools.
  • Safety glasses and steel-toed safety shoes are required.
  • Long pants and a sleeved shirt, at least short-sleeved, must be worn.

Nice To Haves

  • CNC programming experience.
  • Both English and metric tool sets are recommended.
  • A lockable toolbox is recommended.

Responsibilities

  • Review work orders, blueprints, engineering drawings, material specifications, and machining instructions to determine job requirements.
  • Interpret orthographic drawings, reference planes, surface locations, and geometric dimensioning and tolerancing (GD&T).
  • Set up and adjust mills and lathes, including three-jaw and four-jaw chucks, collets, bushings, cams, gears, stops, attachments, and stock pushers.
  • Install cutting tools, indicate vises, and tram machine heads to ensure proper alignment.
  • Program mills and lathes by entering machine instructions, setting zero and reference points, tool registers, offsets, and compensation settings.
  • Apply basic math, geometry, and trigonometry when calculating machining requirements and verifying programs.
  • Load and position raw materials into machine feed systems.
  • Inspect initial runs and sample parts by checking measurements, machine positions, and dimensional accuracy against required specifications.
  • Perform drilling, grooving, cutting, turning, facing, knurling, and thread-chasing operations.
  • Monitor machining processes, take measurements, and make necessary machine adjustments to maintain quality and accuracy.
  • Identify equipment or process issues, troubleshoot problems, and adjust or reprogram machine controls as needed.
  • Sharpen and replace worn cutting tools and follow established quality assurance procedures.
  • Maintain a safe work environment by following applicable safety procedures and regulations.
  • Perform preventive maintenance, troubleshoot equipment problems, and coordinate repairs when necessary.
  • Document completed work, equipment issues, and outstanding tasks to support communication between shifts.
  • Stay current with machining techniques and equipment through technical publications and ongoing learning.
  • Take ownership of assigned work and contribute to production goals and process improvements.
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service