LeMar Industries Maintenance Technician

CTB, Inc.•Des Moines, IA

11d•Onsite

About The Position

As a Maintenance Technician, you will be responsible for ensuring the smooth operation of the machinery and mechanical equipment in the Des Moines facility. This will include performing preventative maintenance and learning to troubleshoot equipment breakdowns.

Requirements

None required, 2 year technical degree is preferred.
None required, 1-2 years is preferred. Must have electrical or mechanical background and able to demonstrate a working knowledge of the field.
Ability to obtain and maintain forklift, overhead crane and additionallicenses as required.
Ability to read blueprints, ability to read and interpret drawings related to electrical, hydraulic, pneumatic, and schematic prints and drawings. Ability to operate overhead crane and forklift. Good knowledge of safe rigging principles.
Read write and do basic math. Must have knowledge of safety regulations and procedures. Must have either electrical or mechanical aptitude. Ability to utilize the Microsoft Suite and applicable maintenance software.
Ability to read, write, and communicate in English.
Strategic, collaborative, inclusive, creative, innovative, customer focused and passionate; Excellent interpersonal, networking, and “team building” skills with strong organizational and motivational ability.
Ethical and respectful, open communication, can initiate dialog to help find solutions, team player, can-do attitude, can respectfully share information to help develop and adhere to best practices.
Ability to occasionally lift and carry 30 to 50 lbs
Ability to work up to 12 hour shifts
Ability to operate hand and power tools
Ability to remain calm and act responsibly during emergencies
Ability to lift and manipulate heavy equipment
Ability to work around grease, oil, dirt, fumes, and in hot or cold environments
Ability to work in awkward positions such as bending, twisting, and kneeling
Ability to walk or stand up to 75% of the workday
Ability to climb ladders and work at heights
Frequent bending, twisting, squatting, grasping, reaching/stretching, walking/standing
The employee is primarily exposed to a manufacturing environment and is required to wear suitable Personal Protective Equipment.
PPE required (such as long pants and shirts, steel-toed shoes, safety glasses, hard hat, harness, hearing protection, gloves, welding PPE, arc flash PPE, air respirator)
Works in manufacturing environment that can be hot, noisy, oily/grease and dusty at times.
Must be able to work in outside weather conditions (hot and humid in the summer and very cold in the winter)
Working on wet surfaces (preventative maintenance in wash bay)
Must work at heights at times with fall protection
Must be willing to work in tight spaces at times

Nice To Haves

2 year technical degree
1-2 years experience
electrical or mechanical background and able to demonstrate a working knowledge of the field.

Responsibilities

Ability to work overtime hours as needed on breakdowns and project work. Unscheduled and unconventional hours required.
Monitor and maintain area 5S safety requirements.
Ability to complete basic preventative maintenance like: greasing bearings, replacing saw blades, maintaining oil levels, etc.
Ability to work on either electrical or mechanical issues as they arise within the facility. Aptitude and drive to learn to work on both electrical and mechanical issues.
Ability to work autonomously on projects related to the basic building and grounds maintenance. This includes but is not limited to a snow removal, trimming of trees/shrubs, hanging/installing office equipment.
Strong ability to prioritizing work in a fast-paced environment.
Ability to assist in the disassemble and reassemble machinery and equipment.
Must be able to complete all physical requirements.
Responsible for maintaining a high safety standard throughout the plant (preventative and predictive maintenance, repairs, and improvements)
Responsible to follow and execute plant safety programs (lockout/tagout, etc)
Responsible to follow all plant safety programs, more specifically lockout/tagout, safety walks, laser safety, Arc Flash safety, etc. as they are applicable to daily maintenance duties.