Maintenance Technician II - C-Shift (Fri-Sun 5am-5pm)

AAON, Inc.•Redmond, WA

2d•$23 - $34•Onsite

About The Position

Diagnose, repair, adjust, or maintain any industrial manufacturing machinery, such as sheet metal machines, engines, pneumatic tools, and conveyor systems in accordance with diagrams, sketches, operation manuals, and manufacturing specifications using hand tools, power tools, and precision measuring and testing instruments. Able to communicate effectively and work as a member of a maintenance organization. Machinist and/or Machine/Maintenance/Repair experience preferred, but not required. Electrical: Safely measure voltage, current and power in AC and DC circuits. Use diagnostic tools and equipment to diagnose and troubleshoot controls and electrical faults on machinery. Able to do basic wiring and understand wire gauges. Basic knowledge of NEC/UL codes. Able to use a computer and diagnostic software to diagnose electrical and automation problems. Mechanical: Align, install, and maintain belt drives and pulleys; chain and sprocket drives; shaft assemblies; pillow block bearings; various couplings. Install/replace motors. Understand air and water systems. Maintain all types of HVAC equipment. Basic knowledge of all types of refrigerant; charge/recover refrigerant, use refrigerant gauges, adjust VFD/controls, change filters, able to properly apply agency knowledge for HVAC equipment. Pneumatic: Align, install, maintain pneumatic lines/hoses. Adjust and regulate pressures. Check operation of water separator/drain in a pneumatic system, as necessary. Diagnose/repair compressors/vacuum pumps. Hydraulic: Understand fluid contamination prevention processes and procedures. Install, repair, and maintain pumps, hoses, valves, cylinders, filters, regulators, seals. Welding: Basic knowledge of metal materials, welding rods, and welding procedures. Able to recognize and use proper safety equipment used in welding. Able to recognize mig and tig welding equipment. General Maintenance: Ability to use basic power tools safely. Ability to use measuring tape properly (both standard and metric). Ability to use basic mathematical skills/calculations to support construction projects. Other: Must conduct all work on premises. Able to regularly work in dusty factory environment subject to extreme heat and cold temperatures. Must be able to work well with others in a team environment to problem solve and provide backup as needed. Must be able to work at heights exceeding 3 ft. Essential Mental Functions: · Communicates effectively in written and spoken form. · Possesses excellent interpersonal relationship skills. · Exhibits good decision making and analytical problem solving abilities. · Demonstrates strong multi-tasking capabilities and organizational skills. · Works effectively in a team environment. · Works effectively in a fast-paced high-pressure environment. Essential Physical Functions: · Lift up to 50lbs. · Sit or stand for up to 95 percent of work hours. · Periodic visits to the manufacturing facility with seasonal hot and cold temperatures, dust, and some chemical fume exposure. Disclaimer: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at a time with or without notice. This job description is not an exhaustive list of all functions that the employee may be required to perform, and the employee may be required to perform additional functions. The company reserves the right to revise this job description at any time. The employee must be able to perform the essential functions of the position satisfactorily. If requested, reasonable accommodations may be made to enable employees with disabilities to perform the essential functions of the job, absent undue hardship.

Requirements

Able to communicate effectively and work as a member of a maintenance organization.
Basic knowledge of NEC/UL codes.
Able to use a computer and diagnostic software to diagnose electrical and automation problems.
Basic knowledge of all types of refrigerant.
Basic knowledge of metal materials, welding rods, and welding procedures.
Able to recognize mig and tig welding equipment.
Ability to use basic power tools safely.
Ability to use measuring tape properly (both standard and metric).
Ability to use basic mathematical skills/calculations to support construction projects.
Must conduct all work on premises.
Able to regularly work in dusty factory environment subject to extreme heat and cold temperatures.
Must be able to work well with others in a team environment to problem solve and provide backup as needed.
Must be able to work at heights exceeding 3 ft.
Communicates effectively in written and spoken form.
Possesses excellent interpersonal relationship skills.
Exhibits good decision making and analytical problem solving abilities.
Demonstrates strong multi-tasking capabilities and organizational skills.
Works effectively in a team environment.
Works effectively in a fast-paced high-pressure environment.
Lift up to 50lbs.
Sit or stand for up to 95 percent of work hours.
Periodic visits to the manufacturing facility with seasonal hot and cold temperatures, dust, and some chemical fume exposure.

Nice To Haves

Machinist and/or Machine/Maintenance/Repair experience preferred, but not required.

Responsibilities

Diagnose, repair, adjust, or maintain any industrial manufacturing machinery, such as sheet metal machines, engines, pneumatic tools, and conveyor systems in accordance with diagrams, sketches, operation manuals, and manufacturing specifications using hand tools, power tools, and precision measuring and testing instruments.
Safely measure voltage, current and power in AC and DC circuits.
Use diagnostic tools and equipment to diagnose and troubleshoot controls and electrical faults on machinery.
Do basic wiring and understand wire gauges.
Align, install, and maintain belt drives and pulleys; chain and sprocket drives; shaft assemblies; pillow block bearings; various couplings.
Install/replace motors.
Understand air and water systems.
Maintain all types of HVAC equipment.
Charge/recover refrigerant, use refrigerant gauges, adjust VFD/controls, change filters, able to properly apply agency knowledge for HVAC equipment.
Align, install, maintain pneumatic lines/hoses.
Adjust and regulate pressures.
Check operation of water separator/drain in a pneumatic system, as necessary.
Diagnose/repair compressors/vacuum pumps.
Understand fluid contamination prevention processes and procedures.
Install, repair, and maintain pumps, hoses, valves, cylinders, filters, regulators, seals.
Recognize and use proper safety equipment used in welding.
Use basic power tools safely.
Use measuring tape properly (both standard and metric).
Use basic mathematical skills/calculations to support construction projects.
Conduct all work on premises.
Work in dusty factory environment subject to extreme heat and cold temperatures.
Work well with others in a team environment to problem solve and provide backup as needed.
Work at heights exceeding 3 ft.
Communicate effectively in written and spoken form.
Possess excellent interpersonal relationship skills.
Exhibit good decision making and analytical problem solving abilities.
Demonstrate strong multi-tasking capabilities and organizational skills.
Work effectively in a team environment.
Work effectively in a fast-paced high-pressure environment.
Lift up to 50lbs.
Sit or stand for up to 95 percent of work hours.
Periodic visits to the manufacturing facility with seasonal hot and cold temperatures, dust, and some chemical fume exposure.