Stabi - 3 Machine Operator (12923)
About The Position
Sets up and operates both automatic and manual assembly lines, assembles parts to specifications. Satisfies SA’s Quality goals and objectives in completion of activities or duties. This role involves maintaining and providing a safe work area, reporting unsafe conditions, completing hourly checks using In Process Check Sheets and Gaging to ensure parts meet Quality Specifications, and notifying the Team Leader of any suspect material. The operator will also complete changeovers using the Changeover Procedure, attach fixtures and jigs, change out station changeover pieces, and fill in the Changeover checklist. Operation includes completing standardized work according to Work Instructions, removing material from boxes and placing it in fixtures or on conveyors, moving parts from machine to machine, observing and listening to machine operation to detect malfunctions, measuring and inspecting parts for conformance to specifications, notifying the Team Leader of any abnormal or unusual conditions, completing line PM’s (planned maintenance) as assigned, and submitting kaizen suggestions for improvements.
Requirements
- High School diploma or general education degree (GED).
- Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedures.
- Ability to effectively present information in one-on-one and small group situations to other employees of the organization.
- Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
- Ability to compute rate, ratio, and percent and to draw and interpret bar graphs and Statistical Process Control (SPC) charts.
- Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form.
- Ability to deal with problems involving several concrete variables in standardized situations.
- Regularly required to stand eight (8) or more hours a day; walk; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear.
- Occasionally required to climb or balance and stoop, kneel, crouch, or crawl.
- Must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds.
- Specific vision abilities required: Close vision (20/40 near vision, with correction), Distance vision (20/40 far vision, with correction), Color vision (red/green, blue/violet and silver/gold discrimination), Depth perception, Peripheral vision (minimum 160 degrees), and Able to adjust focus.
Responsibilities
- Maintain and provide a safe work area and work in a safe manner.
- Report any unsafe conditions to Team Leader immediately.
- Complete Hourly checks using In Process Check Sheets and Gaging to ensure parts meet Quality Specifications.
- Notifies Team Leader of any suspect material and helps to contain material line side.
- Complete changeovers using Changeover Procedure.
- Attach fixtures and jigs to the table positions according to changeover procedure.
- Change out Station changeover pieces according to changeover procedure.
- Fill in Changeover checklist to ensure all changeover steps are complete.
- Completes standardized work in accordance to Work Instructions.
- Removes material from boxes and places in fixture or on conveyor.
- Moves parts from machine to machine as process is completed.
- Observes and listens to machine operation to detect malfunctions.
- Measures and inspects parts for conformance to specifications, using in process sheets, visual checks and gaging.
- Notify Team Leader of any abnormal or unusual condition.
- Complete line PM’s (planned maintenance) as assigned.
- Submit kaizen suggestions for improvements.
Stand Out From the Crowd
Upload your resume and get instant feedback on how well it matches this job.
What This Job Offers
Job Type
Full-time
Career Level
Entry Level
Education Level
High school or GED
