Integration Engineer Swarm Systems

RED CAT HOLDINGS•San Diego, CA
•$90,390 - $141,335•Onsite

About The Position

Apium Swarm Robotics (ASR) develops swarm autonomy software for air, surface, undersea, and ground vehicles used in commercial and defense environments. Integration Engineering owns the build-test-fly loop, integrating new airframes, hardware, firmware, and swarm software onto real aircraft and validating them on the bench and in flight before field use. This is a hands-on, full-time, on-site role at the company’s San Diego facility. The engineer builds, configures, tests, flies, troubleshoots, and repairs small unmanned aircraft, working independently and providing evidence-based feedback to software and mission engineering teams. The role is not primarily customer-facing, but travel is required as needed for test events, integration sprints, and field problems. Work may involve irregular hours around flight-test windows and deployments, as well as occasional international travel.

Requirements

  • U.S. citizenship, because the position requires access to export-controlled technical data.
  • At least 3 years of hands-on experience building, programming, and flying FPV or small multirotor aircraft; experience must include building from parts, soldering, flashing, tuning, and repairing after crashes.
  • Part 107 Remote Pilot Certificate.
  • Proficiency configuring and tuning flight controllers on at least one firmware stack, such as Betaflight, INAV, ArduPilot, or PX4.
  • Strong soldering and electrical skills, including harnesses, connectors, power distribution, reading pinouts and wiring diagrams, and using a multimeter.
  • Working knowledge of RC control links, analog and digital FPV video systems, and safe LiPo/Li-ion battery handling.
  • Systematic troubleshooting skills and ability to isolate hardware, firmware, RF, and configuration faults.
  • Live in the San Diego area or be willing to relocate; relocation assistance is available.
  • Willingness and ability to travel as needed, sometimes on short notice.
  • Ability to work independently with limited oversight and remain calm and effective under operational pressure.
  • Ability to work on-site full time at the San Diego facility; the role is not remote or hybrid.
  • Ability to work irregular hours around flight-test windows and deployments, and to travel when required, including occasional international travel.
  • Ability to work safely around LiPo and Li-ion batteries, soldering equipment, 3D printers, and spinning propellers, and to lift and transport field equipment as required.
  • Successfully complete a post-offer background check.
  • Legally authorized to work in the United States.

Nice To Haves

  • ArduPilot and/or PX4 experience, including parameter tuning and log analysis.
  • Experience with Mission Planner and/or QGroundControl.
  • MAVLink integration, tooling, or scripting experience.
  • Lua scripting on ArduPilot.
  • Experience modifying firmware or building custom firmware targets.
  • Experience with companion computers such as Raspberry Pi or NVIDIA Jetson, Linux command line, and Python scripting.
  • Experience integrating mesh or IP-based datalinks.
  • CAD and 3D printing experience for mounts, brackets, and enclosures.
  • Multi-vehicle or swarm flight experience.
  • Military experience building, maintaining, or operating unmanned systems, including unit-level FPV programs.
  • Experience in defense, export-controlled, or government-adjacent environments.
  • U.S. security clearance or ability to obtain one.

Responsibilities

  • Build, modify, and maintain small UAS, including soldering, wiring harnesses, power distribution, and motor, ESC, and flight-controller installation.
  • Flash, configure, and tune flight controllers across autopilot stacks, including firmware, parameters, PID and filter tuning, failsafes, and flight modes.
  • Integrate radios, datalinks, GNSS/compass, companion computers, and payloads into aircraft and ASR swarm software.
  • Bench-test hardware and software, including power, RF link, sensor, and configuration checks, and use SITL/HITL simulation where applicable.
  • Plan and conduct flight tests, from single-aircraft checkouts to multi-aircraft swarm tests.
  • Retrieve and analyze onboard flight logs to diagnose vibration, tuning, power, and link issues.
  • Troubleshoot failures across hardware, firmware, configuration, and RF; identify root causes and document fixes.
  • Test software releases and report bugs to engineering with reproducible steps and supporting logs.
  • Write and maintain build sheets, configuration baselines, and test reports to make builds repeatable and supportable in the field.
  • Prepare, check, and pack aircraft kits for deployments; maintain shop inventory, spares, and test equipment.
  • Travel as needed to support test events, field deployments, and Mission Engineers.

Benefits

  • Relocation assistance
  • Performance-based bonuses
  • Competitive equity grants
  • Full benefits
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service