Inspector II - Electrical Solutions

BAE Systems • Westminster, CO

8d • $47,614 - $76,181 • Onsite

About The Position

The Operations Strategic Capabilities Unit plays a fundamental role in enabling efficient business and program execution – from strategic capital investments, industrial operations and an efficient supply chain, to state-of-the-art manufacturing and test operations and top-notch facilities management.

What You’ll Do:
Perform Printed Wiring Board/Assembly Inspections, to include, but not limited to soldering, staking, and conformal coat utilizing a Microscope.
Complete Inspections on Cable/Wire Harness Assemblies.
Inspect per IPC Certifications: IPC J-STD-001 with Space Addendum Soldering for Operators & Inspectors (CIS), Assembly of Electronic Assemblies (IPC-A-610), IPC/WHMA-A620, Requirements for Cable & Wire Harness Assemblies; these certifications are not required but preferred.
Work with devices/hardware that are Highly Sensitive Electrostatic Discharge Sensitive.
Maintain working knowledge of BAE Systems Space and Mission Systems (SMS) Process Library.
Perform basic dimensional inspections using micrometers, calipers, feeler gauges, etc.
Create and maintain First Article Inspection Reports, as required.
Support Government and/or Customer internal and Source Inspections, as required.
Inspect incoming or production hardware, assemblies or articles for conformance to engineering drawings, schematics, specifications, process standards, specifications, and production or process plans.
Perform incoming test of components. Monitor for conformance to design or test specifications or standards.
Accept or reject materials or articles; identify and document non-conformance and notify appropriate personnel of potential rejection of items.
Refer/document unusual inspection problems or defect trends to supervision, Lead or Quality Engineer.
Apply/enforce/comprehend accept/reject criteria from engineering drawings, specifications, or process certification training.
Witness or monitor functional/performance testing at sub-assembly and/or end-item level.
Support the following test inspections and functions as needed: Box-level integration inspections, ESTE/GSE certifications, vibration testing, thermal testing, TVAC testing, PWA testing, test troubleshooting, rack configuration changes, mate/demate of test connector interfaces and setup, execution and review of various test procedures.
Obtain and maintain all certifications required for assigned tasks.
Troubleshoot inspection problems related to fixtures, , drawings, documentation, or processes.
Perform Final Inspection and review documentation required for end-item shipments.
Maintain a regular and predictable work schedule.
Establish and maintain effective working relationships within the department, the Strategic Business Units, Strategic Capabilities Units and the Company. Interact appropriately with others in order to maintain a positive and productive work environment.
Perform other duties as necessary.
On-Site Work Environment: This position requires regular in-person engagement by working on-site five days each normally scheduled week in the primary work location. Travel and local commute between company campuses and other possible non-company locations may be required.

Working Conditions:
Work is performed in an office environment, laboratory, cleanroom, or production floor.

Requirements

• High School diploma or equivalent plus 1 or more years of related experience.
• Each higher-level related degree, i.e., Bachelor’s or Master’s, may substitute for years of related experience. Degree must be from a university, college, or school which is accredited by an agency recognized by the US Secretary of Education, US Department of Education.
• Must also be willing to relocate permanently, as required, to work at different local company campuses to support business needs.
• #LI-JL2

Nice To Haves

• Inspect per IPC Certifications: IPC J-STD-001 with Space Addendum Soldering for Operators & Inspectors (CIS), Assembly of Electronic Assemblies (IPC-A-610), IPC/WHMA-A620, Requirements for Cable & Wire Harness Assemblies; these certifications are not required but preferred.

Responsibilities

• Perform Printed Wiring Board/Assembly Inspections, to include, but not limited to soldering, staking, and conformal coat utilizing a Microscope.
• Complete Inspections on Cable/Wire Harness Assemblies.
• Inspect per IPC Certifications: IPC J-STD-001 with Space Addendum Soldering for Operators & Inspectors (CIS), Assembly of Electronic Assemblies (IPC-A-610), IPC/WHMA-A620, Requirements for Cable & Wire Harness Assemblies; these certifications are not required but preferred.
• Work with devices/hardware that are Highly Sensitive Electrostatic Discharge Sensitive.
• Maintain working knowledge of BAE Systems Space and Mission Systems (SMS) Process Library.
• Perform basic dimensional inspections using micrometers, calipers, feeler gauges, etc.
• Create and maintain First Article Inspection Reports, as required.
• Support Government and/or Customer internal and Source Inspections, as required.
• Inspect incoming or production hardware, assemblies or articles for conformance to engineering drawings, schematics, specifications, process standards, specifications, and production or process plans.
• Perform incoming test of components. Monitor for conformance to design or test specifications or standards.
• Accept or reject materials or articles; identify and document non-conformance and notify appropriate personnel of potential rejection of items.
• Refer/document unusual inspection problems or defect trends to supervision, Lead or Quality Engineer.
• Apply/enforce/comprehend accept/reject criteria from engineering drawings, specifications, or process certification training.
• Witness or monitor functional/performance testing at sub-assembly and/or end-item level.
• Support the following test inspections and functions as needed: Box-level integration inspections, ESTE/GSE certifications, vibration testing, thermal testing, TVAC testing, PWA testing, test troubleshooting, rack configuration changes, mate/demate of test connector interfaces and setup, execution and review of various test procedures.
• Obtain and maintain all certifications required for assigned tasks.
• Troubleshoot inspection problems related to fixtures, , drawings, documentation, or processes.
• Perform Final Inspection and review documentation required for end-item shipments.
• Maintain a regular and predictable work schedule.
• Establish and maintain effective working relationships within the department, the Strategic Business Units, Strategic Capabilities Units and the Company. Interact appropriately with others in order to maintain a positive and productive work environment.
• Perform other duties as necessary.

Benefits

• At BAE Systems, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 20+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance.
• We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance.
• Our leave programs include paid time off, paid holidays, as well as other types of leave, including paid parental, military, bereavement, and any applicable federal and state sick leave.
• Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards.
• Other incentives may be available based on position level and/or job specifics.

What This Job Offers

• Job Type: Full-time
• Career Level: Mid Level
• Education Level: High school or GED
• Number of Employees: 5,001-10,000 employees