Highway Maintenance Worker 2 - Panaca

State of Nevada•Panaca, NV

19h•Onsite

About The Position

The Nevada Department of Transportation is recruiting for a Highway Maintenance Worker 2 located in Panaca, NV. This is a trainee level position in the series, and the incumbent may progress to the next level upon meeting minimum qualifications, satisfactory performance, and with the approval of the appointing authority. The incumbent is responsible for performing routine maintenance duties, including keeping pavement surface, shoulders, clear zones, and associated roadways in good repair, winter maintenance (snowplow operation and anti-icing activities), summer betterment projects, and assistance in emergency operations. These positions may require working in inclement weather. Highway Maintenance Workers are certified by the Nevada Department of Transportation (NDOT) to operate a variety of complex or specialized highway maintenance and construction equipment to restore and maintain the integrity of roadway surfaces; maintain roadside slopes, shoulders, culverts, and ditches to restore drainage and prevent erosion; and repair or replace related roadway appurtenances such as guardrails, markers, guideposts, and fences.

Requirements

Graduation from high school or equivalent education and one year of experience following certification in the operation of complex or specialized highway maintenance and construction equipment as designated by NDOT; OR an equivalent combination of education and experience.

Nice To Haves

Detailed knowledge of: traffic control and routing through highway maintenance and construction zones; snow removal and anti-icing techniques, materials, and equipment; proper drainage and erosion control methods.
Working knowledge of: materials, methods and equipment commonly used in reconstructing, renovating or repairing highway roadbed, surface, shoulders, drainage facilities, and fixtures; pruning and watering techniques for landscaped areas; traffic paints and beads and retro-reflectivity qualities of these materials; hazardous materials isolation zones as first responders to hazardous material spills; Maintenance Management System Manual; dust control techniques; endangered species habitats, protection techniques and safe removal of non-native species; environmental regulations that impact the method of work at job sites; incident command system and operational controls during emergency operations.
Ability to train others in the operation of complex or specialized highway maintenance and construction equipment; estimate quantities of labor and material needed for a project; read, interpret and explain policies, procedures, regulations and standard plans associated with maintenance activities; operate and maintain complex or specialized highway maintenance and construction equipment; work effectively with staff and representatives of other agencies and companies; diagnose the cause and extent of common equipment, component or basic system malfunctions.

Responsibilities

Operate and perform preventive maintenance and minor repair on a variety of light, medium and heavy-duty highway maintenance, and construction equipment such as a rotary snowplow, motor grader, crawler/tractor, backhoe/grade-all, truck mounted asphalt distributor, chip spreader, cold planer, paint striper, vacuum sweeper, and culvert cleaner.
Act as designated certified operator for certification of Highway Maintenance Worker I’s and II’s; demonstrate and oversee equipment operation and provide training in established safety policies and requirements.
Operate equipment or backup vehicles to install long line, solid and skip lines and gore lines; measure and install various permanent and temporary pavement markings.
Apply chip and flush seals to the construction of maintenance overlays, and cold milling and inlays with hot asphalt.
Provide information for input into the Maintenance Management System; respond to customer service requests and prepare billable accident reports.
Establish traffic controls using accepted methods to reroute traffic or control traffic speed and flow in highway maintenance areas, construction zones, and accident scenes.
Mix salt and sand stockpiles; operate loaders to load salt and sand into trucks; apply anti-icing chemicals; remove snow with medium and heavy dump trucks with snow plows, spreaders, and pre-wetting equipment; operate motor graders; construct and maintain brine-making facilities.
Maintain radio contact with a base station, maintenance personnel and law enforcement agencies; use information provided by the Intelligent Transportation System and the District Operations Center; use the Incident Command System protocol and respond to emergencies outside normal working hours.
Install, repair, and replace roadway signs and signposts; repair and replace bulbs, fixtures, and sensors on lighted sign structures; clean and replace overhead sign panels.
Monitor contract compliance and quality control including testing/materials and completed work performed by contractors.
Maintain landscaped areas and the highway right-of-way; repair, widen or reconstruct tree wells; replace dead or damaged trees, flowers, shrubs, and ground cover; fertilize, mow, and re-seed lawns.
Remove roadway and roadside debris, excess dirt, vegetation, and other traffic hazards; remove dead animals and biohazards.
Respond to accidents and fatalities and complete required forms and documentation.
Perform related duties as assigned.