High Purity Stainless Steel Welder

CAM Industrial Solutions•Taylor, TX

About The Position

The High-Purity Stainless Steel Hand TIG Welder performs manual GTAW welding and fabrication of high-purity stainless-steel tubing and piping systems in semiconductor manufacturing facilities and other controlled environments. The role requires strong hand TIG skills, knowledge of back-purging and contamination control, and the ability to meet strict quality and cleanliness requirements. The welder produces consistent, high-quality hand welds, including in tight or out-of-position locations where orbital welding is impractical, while following approved procedures, safety requirements, project specifications, and industry standards. The position includes welding and fitting tubing, piping, fittings, valves, and components; preparing materials and joints; maintaining purge and shielding gas; inspecting welds; preserving cleanliness and traceability; and coordinating with project personnel. Work may take place in controlled environments and may require gowning and clean-work practices. The role may involve extended hours, weekends, shifts, and physically demanding work in difficult-to-access areas.

Requirements

  • Proven experience performing manual TIG (GTAW) welding on stainless-steel tubing and piping.
  • Ability to produce consistent, full-penetration autogenous hand welds on thin-wall stainless tubing.
  • Knowledge of tube and pipe preparation, fit-up, alignment, and back-purging techniques.
  • Understanding of heat tint, oxidation, and contamination control for high-purity systems.
  • Ability to read and understand welding procedures and fabrication drawings.
  • Ability to pass a hand TIG weld qualification test on stainless-steel tubing and/or pipe.
  • Ability to safely use welding equipment, purge equipment, oxygen analyzers, measuring tools, and hand tools.
  • Strong attention to detail and commitment to quality.
  • Ability to work safely and productively in a fast-paced semiconductor or high-tech construction environment.
  • Ability to work independently and as part of a crew.
  • Willingness to work extended hours, weekends, and/or shifts as project requirements dictate.
  • Ability to stand, walk, bend, kneel, climb, and work in confined or difficult-to-access areas for extended periods.
  • Ability to weld in all positions, including overhead and out-of-position joints, with steady hand control.
  • Ability to lift and carry welding equipment, tools, tubing, and materials.
  • Ability to work from ladders, lifts, scaffolding, and elevated work platforms when required.
  • Ability to wear required PPE and cleanroom or controlled-environment garments.

Nice To Haves

  • Semiconductor fabrication facility, pharmaceutical, biotech, or other high-purity construction experience.
  • Experience with high-purity gas, chemical, and process piping systems (UHP/HP).
  • Experience welding 316L EP and BA tubing and fittings.
  • Current ASME Section IX GTAW stainless-steel welding certification or equivalent qualification.
  • Familiarity with high-purity weld acceptance criteria such as ASME BPE, AWS D18.1/D18.2, or SEMI standards.
  • Experience with weld documentation and traceability requirements.
  • Orbital welding experience.
  • Experience working in cleanrooms or controlled environments.
  • OSHA10 or site-specific safety training.

Responsibilities

  • Perform manual TIG (GTAW) welding on high-purity stainless-steel tubing, piping, fittings, valves, and components.
  • Produce full-penetration hand welds on 316L electropolished (EP) and bright-annealed (BA) tubing where orbital welding is impractical, including tight-access joints, branch connections, and field tie-ins.
  • Perform tack welds and fit-ups in preparation for orbital welding when required.
  • Read and interpret isometric drawings, spool drawings, P&IDs, weld maps, and approved welding procedures (WPS).
  • Cut, face, deburr, clean, fit, and align tubing and pipe to required tolerances before welding.
  • Set up and maintain internal argon purge and torch shielding gas, and verify purge quality with an oxygen analyzer before and during welding.
  • Control heat input and tungsten condition to minimize heat tint and maintain corrosion resistance.
  • Inspect welds for full penetration, bead profile, alignment, oxidation or discoloration, and surface defects according to project acceptance criteria.
  • Support borescope and visual inspection of internal weld surfaces and correct rejected welds as directed.
  • Maintain material and weld cleanliness to prevent contamination, including capping and bagging open ends.
  • Complete weld logs, weld identification, heat-number traceability, and quality-control records accurately and on time.
  • Identify and report welding defects, material issues, equipment problems, or deviations from approved procedures.
  • Coordinate with foremen, supervisors, quality-control personnel, and other trades to maintain project schedules.
  • Maintain TIG welding machines, torches, tungsten, purge equipment, gas systems, tools, and work areas in safe operating condition.
  • Follow site-specific safety, quality, housekeeping, and cleanroom requirements, including gowning, contamination-control, and clean-work practices when required.
  • Safely handle welding gases, chemicals, tools, equipment, and materials.
  • Perform additional duties related to high-purity welding and process-piping installation as directed by supervision.
  • Report unsafe conditions, quality concerns, damaged equipment, and conditions that could affect installation integrity.
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service