Harness Design Lead Engineer, Drive-by-Wire and Autonomy

Forterra•Clarksburg, MD
•$125,000 - $200,000

About The Position

The Harness Design Lead Engineer owns the electrical interconnect of Forterra’s autonomous vehicles end to end, including harnesses that connect drive-by-wire systems, autonomy sensors and compute, radios, payloads, and the base vehicle. The role takes each harness from schematic and 3D routing through released drawings, build, and vehicle installation. It partners with drive-by-wire, autonomy, mechanical, and systems teams to define power and data distribution and make design decisions on wire gauge, shielding, connectors, and topology. Designs must progress from prototype builds to production at rate. As the first harness engineer on the team, this person will establish harness design practices and tools, then build and lead the harness team as the program grows. The role works with harness suppliers from quoting through first article, validation, and production; supports vehicle build-up, installation, troubleshooting, and rework; and uses build feedback to improve designs. It also carries harnesses from prototype to production through design for manufacturing, validation, and change control.

Requirements

  • Bachelor's degree in electrical or mechanical engineering, or a related field.
  • At least 5 years designing wire harnesses for vehicles, heavy equipment, aircraft, spacecraft, or defense systems.
  • Experience owning harness design from schematic through released harness drawings and installation on a working vehicle or system.
  • Experience with harness design tools such as Capital, E3.series, or Zuken, or similar, and 3D routing tools such as NX, CATIA, Creo, or SolidWorks.
  • Experience selecting connectors, wire, and shielding for rugged environments and working directly with harness manufacturers.
  • Working knowledge of vehicle networks including CAN, J1939, and Ethernet, as well as power distribution and grounding.
  • Ability to travel approximately 25% to test sites, suppliers, partner facilities, and Government reviews.

Nice To Haves

  • Harnesses released into production at an automotive OEM or Tier 1, or on heavy truck, off-highway, or military vehicle programs.
  • Experience with military connectors and standards, including MIL-DTL-38999, MIL-STD-1275, MIL-STD-461, and MIL-STD-810.
  • High-speed data harnessing experience, including automotive Ethernet, camera links such as GMSL or FPD-Link, and lidar and radar sensors.
  • Harness validation and workmanship standards experience, including IPC/WHMA-A-620, USCAR-21, and environmental and electrical testing.
  • Experience with redundant power and data paths for safety-critical systems, and ISO 26262 or system FMEA.
  • Hands-on harness build and rework experience, including crimping, soldering, termination, continuity testing, and hipot testing.
  • Experience with drive-by-wire, ADAS, or autonomous vehicle programs.
  • Experience leading or mentoring harness engineers and technicians and setting design standards.

Responsibilities

  • Own vehicle electrical interconnect design, including power distribution, grounding, shielding, signal integrity, and redundant paths for safety-critical functions.
  • Translate system architecture into harness block diagrams, schematics, wire lists, and pinouts in collaboration with systems, drive-by-wire, and autonomy engineers.
  • Select wire gauge, shielding, connectors, and topology, and analyze voltage drop, current, thermal effects, EMI, and crosstalk.
  • Route harnesses in 3D with the mechanical team, accounting for clearance, serviceability, assembly, and motion.
  • Design harnesses for high-speed data and harsh environments, including automotive Ethernet, camera and sensor links, CAN, and J1939, with protection against water, dust, vibration, and temperature extremes to military power and EMI standards.
  • Create build-ready harness drawings with connectors, wiring, dimensions, labeling, and BOMs, as well as formboard layouts, installation drawings, and test procedures.
  • Work with harness suppliers from quote through first article, validation testing, and production at rate.
  • Support vehicle build-up and installation, troubleshoot and rework harnesses during bring-up, and incorporate lessons from builds into designs.
  • Carry harnesses from prototype to production through design for manufacturing, validation, and change control.
  • Establish harness design standards and tools, and hire, build, and lead the harness engineering and technician team as the program grows.
  • Travel to test sites, suppliers, partner facilities, and Government reviews, approximately 25%.

Benefits

  • Equity is included in most of Forterra’s full-time, high-demand roles.
  • Premium healthcare benefits with three plan options, including an HSA-eligible plan; Forterra covers 80% of the plan premium for employees and dependents.
  • Basic life/AD&D and short- and long-term disability insurance plans fully covered by Forterra, with the option to purchase additional life insurance for employees and dependents.
  • Company holiday calendar, including a winter break in December.
  • 20 days of PTO accrued per year.
  • At least 7 weeks of fully paid parental leave for birth or adoption.
  • $9,000 annual tuition reimbursement or professional development stipend.
  • 401(k) retirement savings plan with traditional, Roth 401(k), and after-tax deferral options, plus company match up to 4%.
  • Fully stocked beverage refrigerators.
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service