Hardware Design Validation Engineer

NVIDIA•Santa Clara, CA
•Onsite

About The Position

NVIDIA’s System Product Team (SPT) turns NVIDIA technology into complete systems, including data center servers and racks, laptops and PCs, graphics cards, consumer electronics, and automotive ECUs. The team partners with silicon, software, manufacturing, and other groups to guide products from first power-on through delivery to customers. Validation engineers ensure hardware powers up, performs to specification, withstands stress, and is ready for customers. This role owns validation for a module, board section, or small product, working with a Lead Validation Engineer from first power-on through mass production. The position is based onsite in NVIDIA’s Santa Clara lab five days a week, with travel to manufacturing sites to support new product introduction (NPI) builds.

Requirements

  • BS or MS in electrical engineering or computer engineering, or equivalent experience.
  • At least 2 years of hands-on board or system hardware validation, bring-up, or debug experience; internships and co-ops count.
  • Strong fundamentals in circuit analysis, digital design, transmission lines, and power supplies, demonstrated through projects or work.
  • Hands-on experience in one or more of power validation, high-speed I/O validation, low-speed I/O, or system functional and stress testing.
  • Hands-on laboratory experience with oscilloscopes, power supplies, electronic loads, DMMs, TDR, and logic or protocol analyzers.
  • Working knowledge of schematics, PCB layout, and BOMs.
  • Ability to root-cause failures across board, firmware, and software using measurements and first-principles reasoning.
  • Scripting or programming skills in Python or C/C++; comfortable working in Linux and Windows.
  • Clear communication and ability to learn quickly while working across teams, JDM partners, vendors, and time zones.
  • Genuine interest in building products; personal hardware projects are relevant.
  • Able to work onsite in the Santa Clara lab five days per week and travel to nearby manufacturing sites, typically up to 5%, to support NPI builds and factory un-gating.

Nice To Haves

  • Exposure to Android or automotive operating systems.
  • Hands-on experience across multiple areas such as power, high-speed I/O, low-speed I/O, or system stress testing, and validation or bring-up on GPU, server, automotive, or embedded platforms.
  • Multi-phase voltage regulator design validation or power delivery network characterization.
  • High-speed I/O electrical validation experience, including eye diagrams, compliance testing, BERT, PCIe link training, or DDR.
  • Experience creating or automating system stress workloads, functional test suites, or laboratory infrastructure.
  • BMC/manageability or firmware debugging experience.
  • Factory build or NPI support experience.
  • Personal hardware builds that were designed, built, and debugged, such as racing, drone, or robotics projects; or tutoring or teaching assistant experience in circuits.
  • Able and willing to travel internationally, primarily to manufacturing sites in Asia, including Taiwan and mainland China, up to 8% during NPI peak.

Responsibilities

  • Own validation of a module, board section, or small product in partnership with the Lead Validation Engineer, from first power-on through mass production.
  • Support test plan development and perform validation in areas such as power, high-speed and low-speed I/O, clocks and resets, BMC, sensors, telemetry, and firmware.
  • Debug and determine root causes of board, firmware, and system issues from bring-up through production using measurements and first-principles analysis.
  • Perform power validation, including sequencing, load, transient, and protection testing.
  • Validate high-speed interfaces such as PCIe, Ethernet, and USB using high-bandwidth oscilloscopes, TDR, and protocol analyzers.
  • Run thermal, power, I/O, memory, and voltage/frequency-corner stress testing; report status, issues, and risks clearly.
  • Review schematics, layouts, BOMs, and datasheets, and provide timely product-improving feedback.
  • Support NPI and production builds and debug at manufacturing sites, locally and overseas, to help products ship on time.
  • Work with mechanical, design, industrial design, thermal, shock and vibration, EMI/EMC, and software teams, as well as JDM partners, vendors, and teams in Asia and Europe; track issues through closure.
  • Validate hardware with SBIOS, VBIOS, drivers, Windows, Linux, automotive operating systems, and Android; develop test scripts and automation.
  • Communicate status and risks, and mentor interns and newer engineers.

Benefits

  • Competitive salaries
  • Equity
  • Comprehensive benefits package
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service