GNC Engineer - Actuation Systems

Castelion Corporation•Torrance, NM

About The Position

As a GNC Engineer focused on actuation systems at Castelion, you will develop the control algorithms, models, and software that translate vehicle commands into precise physical motion. The role spans actuator modeling, closed-loop control, system identification, hardware characterization, simulation, and flight integration. Depending on experience, you may contribute to individual control loops or own complete actuation systems from requirements and architecture through hardware testing and flight. The position suits engineers interested in controls, electromechanical systems, hands-on testing, and applying algorithms directly to hardware performance. The role involves close collaboration with GNC, avionics, embedded software, mechanical, electrical, and test engineers to deliver integrated, flight-ready actuation systems. The position may require access to classified information or restricted U.S. Government sites, systems, or information. If designated, employment may depend on obtaining and maintaining required security clearance or other government authorization and meeting applicable citizenship or eligibility requirements. The position also requires access to export-controlled information; employment is contingent on being able to access applicable information without additional export licensing.

Requirements

  • Bachelor's degree in Aerospace Engineering, Mechanical Engineering, Electrical Engineering, Computer Engineering, or a related technical field.
  • Strong fundamentals in feedback controls, dynamics, or electromechanical systems.
  • Experience programming in Python, Rust, C/C++, Julia, or a similar technical computing language.
  • Experience analyzing dynamic systems through coursework, research, internships, projects, or professional work.
  • Ability to work effectively across software, electrical, mechanical, and controls disciplines.
  • Ability to access applicable export-controlled information without additional export licensing being required.

Nice To Haves

  • Experience designing and tuning closed-loop control systems for electromechanical or aerospace hardware.
  • Experience with motor control, servo systems, position control, velocity control, force control, or torque control.
  • Experience modeling DC, BLDC, or PMSM motors and associated drive electronics.
  • Experience with mechanical transmission systems such as gearboxes, ball screws, linkages, or rotary-to-linear mechanisms.
  • Strong understanding of classical control techniques, including loop shaping, gain and phase margin, bandwidth, and frequency-domain analysis.
  • Experience with state-space controls, observers, feedforward control, or disturbance estimation.
  • Experience with nonlinearities including saturation, rate limits, deadband, backlash, friction, hysteresis, and compliance.
  • Experience with system identification and correlating analytical models against hardware test data.
  • Experience with embedded or real-time control software.
  • Experience with sensors such as encoders, resolvers, current sensors, load cells, or position transducers.
  • Experience with actuator sizing, power requirements, thermal constraints, structural loads, or performance trades.
  • Experience developing actuator-dynamics simulation models and integrating them into larger vehicle simulations.
  • Experience with Monte Carlo analysis, uncertainty analysis, or robustness assessment.
  • Experience with Software-in-the-Loop (SITL) or Hardware-in-the-Loop (HITL) testing.
  • Experience designing or operating test stands and working directly with flight-like hardware.
  • Experience supporting aerospace, robotics, automotive, industrial automation, or other high-performance motion-control systems.

Responsibilities

  • Design, implement, and tune closed-loop control systems for flight vehicle actuators.
  • Develop position, velocity, force, torque, and current control architectures as required by the actuator system.
  • Model electromechanical actuator dynamics, including motors, transmissions, ball screws, control surfaces, sensors, structural loads, friction, backlash, saturation, and other nonlinear effects.
  • Develop actuator performance requirements and support motor, gearing, sensor, and mechanical hardware sizing.
  • Analyze stability, bandwidth, robustness, disturbance rejection, and tracking performance.
  • Develop feedforward, filtering, compensation, anti-windup, command shaping, and other features to improve actuator performance.
  • Perform system identification and parameter estimation using component, bench, and integrated test data.
  • Build actuator models for high-fidelity vehicle and 6-DOF simulations.
  • Implement control algorithms in embedded flight software and support real-time execution constraints.
  • Develop Software-in-the-Loop (SITL) and Hardware-in-the-Loop (HITL) test environments for actuator validation.
  • Plan and execute hardware characterization and closed-loop actuator testing.
  • Analyze test and flight data to validate models, identify performance limitations, and improve control designs.
  • Collaborate across GNC, avionics, embedded software, mechanical, electrical, and test engineering disciplines to deliver integrated flight-ready actuation systems.

Benefits

  • Castelion offers a generous benefits package; details are available at the bottom of the company's Careers page.
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service