877 - General Application- Job Fair- Tyler, TX.

Apave America•Longview, TX

4d•Onsite

About The Position

Apave America is immediately hiring several professionals for Nested positions for a client site located in the Tyler, TX area. This is full-time Nested employment. No Per Diem - No Travel. This is an US Based Opportunity! Competitive Pay - Relocation or Retention Bonus Available. Seeking Experienced API Professionals with 510/570 Certifications. NDT professionals whose focus is MT/PT/UTT Rope Access Level III RT Level II. Applicants who also bring any of the following will be strongly prioritized. In this role, The API 510/570 Inspector will conduct visual examinations of pressure retaining equipment such as tanks, piping, and vessels ensuring their mechanical integrity by performing visual inspections according to established API standards and codes (i.e. 510 for pressure vessels, 570 for piping), to identify potential issues, maintaining documented reports of inspection findings, recommend necessary repairs, and certifying compliance with industry regulations. Conduct Inspections and Assessments Inspect pipelines, pressure vessels, storage tanks, and other critical infrastructure for signs of wear, corrosion, cracks, leaks, or other damage. Perform internal and external inspections based on industry standards like API 510 (pressure vessels), API 570 (piping) Ensure compliance with relevant codes and standards (e.g., API, ASME, ASTM, NFPA, and OSHA). In this role, the Rope Access is responsible for carrying out standard rope access operations under the direct supervision of an authorized Level III rope access supervisor. The technician will use Industrial Rope Access methods and related equipment to access and complete a wide variety of inspection, maintenance and other industrial work tasks while on ropes or in difficult access areas. Technicians must have the ability to perform work that is physically demanding, have good communication skills and the ability to assimilate a large amount of new information. Responsibilities may also include rescue operations, technical reports and administrative tasks. Work hours, locations, shifts and nature of work assignments vary greatly, and travel may be required. In this role, the NDT Level II RT Technician must have sufficient technical knowledge and skills to be qualified to set up and calibrate equipment and to interpret and evaluate results with respect to applicable codes, standards, and specifications. The RT Level II must be thoroughly familiar with the scope and limitations of the methods for which qualified and shall exercise assigned responsibility for on-the-job training and guidance of trainees and RT Level I personnel. The RT Level II must be able to organize, and report results of NDT tests. In this role, the NDT Assistant Technician , (or Non-Destructive Testing Assistant), will primarily assist a certified NDT Technician by setting up and operating testing equipment, preparing test areas, performing basic inspections, interpreting initial test results under supervision, maintaining documentation, and ensuring safety protocols are followed during non-destructive testing procedures on materials and structures, all while learning the fundamentals of various NDT methods like Ultrasonic Thickness Testing (UTT), Radiographic Testing (RT), Magnetic Particle Testing (MT), and Penetrant Testing (PT).

Requirements

Minimum of three (3) years' experience working with the 510, 570, and/or 653 certifications required.
Valid MT/PT certifications (Level I or II depending on role).
ASNT ISQ UTT Certification required for UTT roles.
State carded RT credentials
Strong understanding of refinery safety and inspection environments.
Reliable, safety-focused, and able to work in a nested refinery setting.
High School Diploma or equivalent is required
Must be at least eighteen (18) years of age
Current IRRSP Card or State Card required for Radiographers
SNT Level II certification in RT required for Radiographers
UTT technicians must hold the ASNT ISQ UTT Certification
Must provide proof of classroom training hours in RT
Must have 40 hours of Radiation Safety Training
Must be capable of following verbal and written instructions
Capable of training assistant radiographers
Valid Driver’s License and pre-access drug and alcohol testing required
Pre-employment background checks will be required
Ability to lift, move and carry objects weighing 75 lbs. repeatedly
Must be able to walk, stand, bend, reach, and climb
Must be able to work indoors/outdoors in all weather conditions
Must be able to work in confined spaces and at heights, including climbing tanks, ladders, scaffolding, towers, piping systems, catwalks, structural steel, and wind turbines
Must be able to stand for extended periods, lift heavy objects, and work in various environments including from heights and confined spaces
Sufficient vision or other powers of observation, with or without reasonable accommodation, which permit the employee to investigate
Sufficient manual dexterity, with or without reasonable accommodation, which permits the employee to perform routine in-field or office job duties
Sufficient personal mobility and physical reflexes, with or without reasonable accommodation, which permit the employee to perform in-field or office job duties
Ability to maintain focus and multitask effectively
Exhibits sensible and responsible behavior
Move, carry, and lift objects 50 lbs. or more.
Must be able to work in confined spaces and at heights, including climbing tanks, ladders, scaffolding, towers, piping systems, catwalks, structural steel, and wind turbines.
Must be able to walk, stand, bend, reach, and climb.
Must be able to work indoors and outdoors in all weather conditions.
Must be able to wear safety equipment as required by the safety department for personal protection
Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively
Sufficient vision or other powers of observation, with or without reasonable accommodations, which permits employee to investigations
Sufficient manual dexterity with or without reasonable accommodation, which permit the employee to perform routine in-field or office job duties
Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform in-field or office job duties
Sufficient personal mobility to maneuver within a refinery or plant environment to include the ability to gain access to elevated platforms via ladders or stairwells
Ability to maintain focus and multitask effectively

Nice To Haves

Additional API 653 certification will be considered an asset.
Weld-quality and profile RT Level II experience
Experience with digital radiography (DR) systems
SNT certifications in MT/PT/UTT/PMI considered an asset
Weld-quality profile RT Techs with state cards and digital radiography experience preferred
Current SPRAT and/or IRATA Rope Access certification will be considered an asset

Responsibilities

Conduct visual examinations of pressure retaining equipment such as tanks, piping, and vessels ensuring their mechanical integrity by performing visual inspections according to established API standards and codes (i.e. 510 for pressure vessels, 570 for piping), to identify potential issues, maintaining documented reports of inspection findings, recommend necessary repairs, and certifying compliance with industry regulations.
Conduct Inspections and Assessments Inspect pipelines, pressure vessels, storage tanks, and other critical infrastructure for signs of wear, corrosion, cracks, leaks, or other damage.
Perform internal and external inspections based on industry standards like API 510 (pressure vessels), API 570 (piping)
Ensure compliance with relevant codes and standards (e.g., API, ASME, ASTM, NFPA, and OSHA).
Carry out standard rope access operations under the direct supervision of an authorized Level III rope access supervisor.
Use Industrial Rope Access methods and related equipment to access and complete a wide variety of inspection, maintenance and other industrial work tasks while on ropes or in difficult access areas.
Perform work that is physically demanding, have good communication skills and the ability to assimilate a large amount of new information.
Responsibilities may also include rescue operations, technical reports and administrative tasks.
Set up and calibrate equipment and to interpret and evaluate results with respect to applicable codes, standards, and specifications.
Exercise assigned responsibility for on-the-job training and guidance of trainees and RT Level I personnel.
Organize, and report results of NDT tests.
Assist a certified NDT Technician by setting up and operating testing equipment, preparing test areas, performing basic inspections, interpreting initial test results under supervision, maintaining documentation, and ensuring safety protocols are followed during non-destructive testing procedures on materials and structures, all while learning the fundamentals of various NDT methods like Ultrasonic Thickness Testing (UTT), Radiographic Testing (RT), Magnetic Particle Testing (MT), and Penetrant Testing (PT).