Forward Deployed Robotics & Systems Engineer

Caterpillar Inc.•Irving, TX
•$97,530 - $158,480•Remote

About The Position

Caterpillar is scaling intelligent heavy equipment systems—including autonomy, safety systems, production and efficiency monitoring, grade and positioning, and field data collection—from early customer deployments to commercial operations. The Field Engineering & Deployment team takes these edge systems from engineering release through installation, commissioning, stabilization, and safe, productive operation at customer sites on Caterpillar and other OEM machines. As systems mature, the team develops standards, training, and support so routine installation and service can transition to the Caterpillar dealer network. Forward Deployed Robotics & Systems Engineers are hands-on field engineers who bring these systems to life. They work directly on and around large operating equipment, inspect and correct installations, use hand tools and electrical test equipment, and diagnose issues across machines, sensors, harnesses, power, networks, embedded compute, and software using C++, Python, and Linux. They collaborate with Machine & Site Engineers, Deployment Technicians, and dealer technicians, own customer outcomes at assigned sites, convert field learning into repeatable dealer work standards, and provide feedback to product engineering. The role involves frequent travel to remote customer and dealer locations, extended onsite stays, and work in outdoor conditions around operating mobile equipment.

Requirements

  • Knowledge of decision-making processes and tools, with the ability to analyze situations and reach productive decisions based on informed judgment.
  • Effective communication skills, including accurately transmitting, receiving, and interpreting ideas, information, and needs.
  • Customer-focus knowledge and the ability to maintain positive customer relationships and deliver on customer expectations.
  • Knowledge of software development tools and activities and the ability to produce software products or systems in line with product requirements.
  • Knowledge of software integration processes and the ability to design, develop, and maintain interfaces and links to other platforms and software packages.
  • Technical knowledge of software products and the ability to design, configure, and integrate their technical aspects.
  • Knowledge of software product testing and the ability to design, plan, and execute testing strategies to ensure quality and requirements compliance.
  • Bachelor’s degree in electrical, mechatronics, robotics, mechanical, computer, or systems engineering, computer science, or equivalent hands-on technical experience.
  • At least 4 years of experience in robotics, autonomous vehicles, machine controls, or industrial automation, including hands-on field deployment and hardware/software integration on physical machines.
  • Hands-on experience installing, wiring, commissioning, or repairing electrical, electronic, sensor, or robotic systems on vehicles or machinery; safe use of hand tools, multimeters, and other electrical test equipment; and ability to read wiring diagrams and schematics.
  • Proficiency in Python and working proficiency in C++, with experience developing and debugging software and applying solid software engineering practices.
  • Hands-on Linux troubleshooting at the machine across services, networking, logs, and performance, with the ability to investigate issues and clearly escalate complex findings.
  • Working knowledge of CAN-based vehicle networks, Ethernet/IP networking, and autonomy sensors such as cameras, radar, lidar, and GNSS/RTK.
  • Ability to independently execute assigned deployment, configuration, and validation activities at remote sites with limited support, own issues through closure, and seek senior technical guidance when needed.
  • Clear communication with engineers, operators, dealers, and customers, including documenting troubleshooting findings and providing practical operational guidance.
  • Valid driver’s license required.
  • Ability to travel frequently to remote sites and dealer locations, work extended onsite stays and schedules that may include early mornings, nights, or weekends, work outdoors in varied conditions and around large operating equipment, climb machines using three points of contact, lift and carry equipment up to approximately 50 lb, wear required PPE, and follow site safety rules including lockout/tagout and mobile-equipment interaction procedures.

Nice To Haves

  • Working knowledge or experience with J1939, drive-by-wire, machine-control integration, and ROS or similar robotics middleware.
  • Experience with remote diagnostics, telemetry, and field data analysis.
  • Construction, mining, quarry, agriculture, trucking, or off-highway experience, ideally with Caterpillar or comparable machines; Caterpillar dealer experience is a plus.
  • OSHA 10 or equivalent jobsite safety training; MSHA Part 46/48 training for mining sites. Training may be completed after hire.

Responsibilities

  • Assess machine and jobsite readiness using established checklists, including machine condition, connectivity, GNSS/RTK positioning, and site infrastructure, and escalate integration issues as needed.
  • Install, inspect, and correct edge hardware with engineering and deployment colleagues and dealer technicians, including sensors, compute, harnesses, power, grounding, communications, and machine interfaces, following established standards.
  • Execute assigned configuration, calibration, acceptance validation, and early-operation stabilization activities; seek senior guidance for complex issues and support site-exit readiness.
  • Execute site test plans using approved acceptance criteria and operating procedures, document validation results, and maintain complete deployment records.
  • Perform first-line electrical and network diagnosis at the machine using multimeters, CAN tools, and laptops; trace power, ground, connector, and harness faults and repair or replace components within established procedures.
  • Troubleshoot Linux services, networking, and performance at the machine; classify faults by domain and escalate complex findings with supporting evidence.
  • Investigate issues involving cameras, radar, lidar, GNSS/RTK, CAN/J1939 networks, embedded compute, connectivity, and autonomy behavior, partnering with senior engineers on cross-system root causes.
  • Develop and debug assigned C++ and Python fixes, scripts, and configurations using logs, telemetry, traces, and electrical measurements; document reproduction steps and validate corrective actions with engineering guidance.
  • Make onsite technical decisions within established procedures, seek guidance on unfamiliar risks or trade-offs, and stop autonomous operation when conditions exceed approved safety limits.
  • Complete commissioning sign-off data-quality checks by verifying sensor calibration and validating sample data against the agreed data specification.
  • Document repeatable fixes as troubleshooting steps and work instructions in the team knowledge system, and coach dealer technicians during co-delivered deployments.
  • Route customer requests and scope changes to the Field Deployment Program Manager rather than committing to scope onsite.
  • Share technical findings and proposed fixes through the Field Review Board and engineering reviews, and document lessons learned to improve deployment playbooks.
  • Collect and analyze site performance and readiness data, flag recurring issues, and share findings that support technical improvements and deployment decisions.
  • Work with customer supervisors, operators, dealers, and engineers on assigned technical activities; explain system capabilities and constraints and support training on daily operation.
  • Represent Caterpillar professionally onsite, own assigned issues through closure, and communicate customer feedback and field evidence to senior engineers and product and engineering teams.

Benefits

  • Medical, dental, and vision benefits
  • Paid time off plan, including vacation, holidays, and volunteer time
  • 401(k) savings plans
  • Health Savings Account (HSA)
  • Flexible Spending Accounts (FSAs)
  • Health Lifestyle Programs
  • Employee Assistance Program
  • Voluntary Benefits and Employee Discounts
  • Career Development
  • Incentive bonus
  • Disability benefits
  • Life Insurance
  • Parental leave
  • Adoption benefits
  • Tuition Reimbursement
  • Relocation is available for this position
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service