Flex Installer

NuCO2•Salt Lake City, UT

1d•Onsite

About The Position

NuCO2 is the largest national provider of beverage grade liquid CO2 to the food service and hospitality industry. We have an immediate need for an installer who is responsible for managing on-site installation, repair, maintenance, and equipment testing for CO2 hi-pressure cylinders, and other products to customers on an established route. A Flex Resource Technician will be required to fill in as a Delivery Driver, Installer / Technician, and/or Depot Supervisor due to manpower shortages within the specified Districts or other Districts, as needed. A Flex Resource Technician will be required to address and or report any depot compliance issues to their District Manager and/or District Safety Manager.

Requirements

Must be at least 21 years of age.
Minimum of 1 year commercial driving experience in a similar vehicle in the past 3 years.
Must have a clean driving record that meets NuCO2’s Safety Point System.
Strong mechanical ability and basic knowledge of building construction process required.
Travel in region or nationally, including multiple overnight stays, depending on the need of the company for a minimum of 50% or more of the time.
Need to be flexible enough to travel with minimal notice.
Ability to lead and motivate subordinates through a positive safety first, goal oriented, and productive mindset.
Ability to read, analyze and interpret established SOP’s, technical procedures, or governmental regulations.
Excellent verbal and written communication skills. Have the ability to communicate effectively (verbally and by email) all SOP’s installation challenges to the Scheduler, Sales, Ops. Managers, and Safety Departments.
Excellent verbal and written communication skills to effectively communicate within and outside of the organization.
Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
Strong organizational and multi-tasking skills.
Have basic knowledge of the permitting procedures, where applicable.
Basic mathematical skills – addition, subtraction, multiplication, percentages, decimals, and division.
Basic Microsoft Office computer skills.
Follow all Safety and operational requirements, policies, and procedures.
Have integrity in all aspect of the job.
Have the ability to properly communicate with all levels of management, peers, and the customers in a professional and courteous manner.
Willingness/enthusiasm for accepting responsibility and accountability; An “ownership mentality”.
Have strong problem solving ability and work ethic.
Independent worker.
Ability to deal effectively with ambiguity.
Achievement/results driven.
High-energy individual.
Ability to foster strong relationships with colleagues/customers.
Recognized as a source of expertise.
Must be able to wear all required PPE, (Hard hats, safety glasses, ear protection, steel toed boots, and gloves as required).
Must be able to direct lift up to 55 lbs. and frequently maneuver (pull/push) 56 - 175 lbs.
Must be able to occasionally maneuver an appliance dolly with a CO2 tanks weighing up to 750 lbs. and 6 ft. tall using a handcart.
Ability to climb in and out of truck multiple times a day.
Ability to climb ladders and work in confined spaces while reaching over head.
Frequent walking, standing, kneeling, and crawling.
Must be able to work at different height levels.
Must be able to work in an outside environment while tolerate extreme temperatures (hot or cold depending upon season and depot location).
Have the ability pull and retrace a fill hose with distances up to 100 feet.
Must be able to wear company required uniforms.

Nice To Haves

A minimum of two years experience as a supervisor preferred.
Previous experience in plumbing, cable installation, or construction experience preferred.
Experience using Ultipro, Digital Dashboard, E-Pal, Nu Routes, Microsoft Office products, to assist the depot management preferred.
Experience with Hazardous Material and pressurized gas systems preferred.

Responsibilities

Manage on-site installation, repair, maintenance, and equipment testing for CO2 hi-pressure cylinders, and other products to customers on an established route.
Fill in as a Delivery Driver, Installer / Technician, and/or Depot Supervisor due to manpower shortages within the specified Districts or other Districts, as needed.
Address and or report any depot compliance issues to their District Manager and/or District Safety Manager.
Monitor employee timesheets in Ultipro to ensure compliance with Hours of Service Regulations (OP-201).
Train and manage drivers to adhere to Xata guidelines.
Inspect depot property, Receiver, Trucks, PAL devices, Xata, and all associated equipment for quality assurance, while using company approved Standard Operation Procedures (SOP’s).
View all E-mails and respond as necessary in a professional and timely manner.
Review DCI (Driver Check In) to plan resources to complete install, pulls, swaps, and call-in requests.
Review completed trips report to ensure route completion, productivity, and to identify frequency adjustments.
Review and approve all exceptions and makes necessary frequency changes.
Review completed service and installation activities while using company approved Standard Operation Procedures (SOP’s).
Verify depot cylinders, bulk tanks, and parts inventory.
Send daily Receiver reading levels to Praxair via website and receive liquid CO2 inventory in E-PAL.
Review Digital Dashboard to update delivery schedule and schedules resources accordingly.
Review installs & service schedule and communicates challenges to the Service Scheduler.
Verify CO2 transfers in the “Quality Product Tracking Log”.
File COA and delivery receipts from CO2 vendors in date order for quality assurance process.
Perform weekly cycle counts in E-PAL.
Conduct weekly Safety Meetings while reviewing “Safety Alerts” and corporate safety topics.
Review weekly KPI’s and Xata performance results with all associates (hard brakes, speeding, and idle time).
Keep weekly communication board current with all OSHA, Safety, and Management correspondence.
Keep proper maintenance of tank and N2Gen inventory and sends non-operational units to RF1 (Milcarb) or RF2 (Memphis).
Route all new customers off the 999 status in Nu Routes.
Verify inventory transfers are completed in E-Pal.
Inspect all cylinders dates and labeling, perform cylinder inventory and order if needed.
Send e-mail part request to shipping weekly or as needed.
Purchase necessary depot supplies.
Inspect all vehicles for supplies to ensure Safety and DOT compliance.
Clean and inspect Depot to ensure Safety compliance.
Review UltiPro for missing time punches and hours of services compliance.
Forward service call request to Scheduler to create case number for ticket creation.
Submit trip records if driving an apportion plated vehicle (1st and the 15th).
Review and approve timesheets for payroll.
Fax monthly Safety topic sign-off sheet to the District Safety Manager.
Complete Monthly Safety Assessment Audits (which include OSHA,,VKPI, and DOT compliance requirements).
Complete End of Month Inventory.
Review vehicle PM Schedules and coordinate service work with Ryder/Penski.
Submit End of Month Mileage in Digital Dashboard.
Follow all P-Card company policy requirements.
Complete Associate Performance reviews and Driver Required Training.
Complete Ride-A-longs while reviewing the Smith System process.
Complete VK inspections on Bulk Trucks, if certified.
Direct the Tech / Driver Supervisor, Technician, or any Driver in any task or directive.
Train new associates and provide safety training.
Supervise any depot location.
Adhere to and enforce the organization’s policies, procedures, Federal/State applicable laws and municipal regulations.
Interview, hire, road test, and train associates.
Perform resource planning, assigning, and directing work; appraising performance; rewarding and counseling employees; addressing complaints and resolving all depot concerns.