Fleet Maintenance Technician Series

City of Delaware • Delaware, OH

9d • Onsite

About The Position

Under the direct supervision of the Fleet Maintenance Division Supervisor and under the general supervision of the Public Works Superintendent, is responsible for the maintenance, repair and inspection activities of small gas equipment, light and heavy-duty vehicles, construction equipment, and emergency response vehicles (based on the level of the position). Subject to emergency callouts and must be able to work overtime including nights, weekends, and stand-by as required. Extended evening shift and weekends should be expected during winter operations. May be assigned to any division within the Public Works Department as a substitute for individuals on vacation, sick leave, etc., or during heavy workload periods or emergency situations.

Requirements

• Basic understanding of the standard methods, practices, tools and equipment of the automotive trade.
• Basic understanding of the hazards and standard safety protocols in the performance of essential functions as well as City policies regarding safe work practices.
• Basic understanding of the principles of operation of gasoline and diesel engines.
• Basic knowledge in all areas of an Apprentice listed above
• Basic understanding in equipment hydraulics maintenance and repair.
• Basic understanding of and familiarity with computers and associated diagnostic software.
• Basic knowledge of oxygen/acetylene torches and welding abilities.
• Working knowledge in all the areas of a Tech I listed above.
• Working knowledge of heavy construction and emergency response equipment, operations, maintenance and repair.
• Considerable knowledge in all the areas of a Tech I & II listed above.
• Semi-skilled in the use and care of hand and machine tools.
• Skill in following through on assignments with daily oversight and direction.
• Semi-skilled or skilled (as applicable) in all areas of an Apprentice listed above.
• Semi-skilled in locating and adjusting defects in a large variety of fleet equipment.
• Semi-skilled in the maintenance of carburetors, fuel injection and diesel diagnostics.
• Skilled in all the areas of a Tech I listed above.
• Skilled in oxygen/acetylene torches and arc welding.
• Skilled in automotive electronics repairs.
• Skilled in use of automotive scanning equipment and software.
• Skill in working independently and following through on assignments with minimal direction.
• Highly skilled in all the areas of a Tech I & II listed above.
• Highly skilled in equipment hydraulics maintenance and repair.
• Ability to prepare activity reports and maintenance logs.
• Ability to operate a computer and associated programs in performing record input and maintenance.
• Ability to complete work orders daily in a detailed and legible manner.
• Ability to understand and carry out simple oral and written instructions.
• Ability to comprehend and apply training to read and interpret diagrams, technical specifications, schematics, flow-charts and operation manuals.
• Ability to perform basic mathematical calculations.
• Ability to develop and maintain effective working relationships with fellow City staff, associates, contractors and the general public.
• Abilities in all areas of an Apprentice listed above.
• Ability to understand mechanical procedures and to test vehicles, machinery, equipment and parts for proper operation with daily oversight and guidance.
• Ability to comprehend and apply training to read and interpret diagrams, technical specifications, schematics, flow-charts and operation manuals.
• Ability to operate and maintain diagnostic equipment and mechanical tools for heavy equipment and automotive repair.
• Ability to respond positively to minor oversight, instruction, and the constant demands throughout the workday.
• Ability and personal desire to stay abreast with current training and technological trends within the field of fleet maintenance.
• Abilities in all the areas of a Tech I listed above.
• Ability to prepare written reports, including work orders, activity reports and maintenance logs.
• Ability to understand and carry out moderately complex oral and written instructions.
• Ability to diagnose and repair complex problems within accepted guidelines with minor oversight and guidance.
• Ability to modify, design and fabricate special purpose equipment with minimal assistance.
• Ability to comprehend and apply advanced training to read and interpret diagrams, technical specifications, schematics, flow-charts and operation manuals.
• Abilities in all the areas of a Tech I & II listed above.
• Ability to work independently through all assignments, tasks and work.
• Ability to fill in for Division Supervisor during his absence.
• Ability to understand and carry out complex oral and written instructions.
• Ability and personal desire to stay abreast with current training and technological trends within the field of fleet maintenance and to disseminate information to other technicians in an ongoing effort to communicate best practices, technological advances and processes.
• Ability to respond positively to instruction, provide positive instruction to others, and respond to the constant demands throughout the workday.
• Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits the employee to discern verbal instructions, alarm and warning systems, including backup alarms, and to diagnose engine problems and relay maintenance needs.
• Sufficient vision or other powers of observation, with or without reasonable accommodation, which permits the employee to comprehend written work instructions and work orders, to inspect heavy equipment and automotive parts, fluid levels and make necessary repairs.
• Sufficient manual dexterity, with or without reasonable accommodation, which permits the employee to operate a variety of automotive shop tools and to make adjustments to equipment.
• Sufficient strength to lift and carry, or otherwise transport, objects weighing one-hundred (100) pounds or more for varying distances repeatedly throughout an extended day.
• Sufficient personal mobility, stamina, flexibility and balance to perform maintenance and repair functions that require standing, lifting, bending, stooping, kneeling, stretching, or other physical exertions, with or without reasonable accommodation, which permits the employee to work under vehicles, in cramped spaces and to remove and replace parts for repair or replacement for extended period of time.
• Any combination of training and experience which will indicate possession of the skills, knowledge and abilities listed above.
• Sufficient education, technical training or related coursework to ensure the ability to read, write, perform basic math.
• Must provide and maintain own toolbox and hand tools.
• Must be honest, dependable, and trustworthy.
• Possession of a valid State of Ohio Motor Vehicle Commercial Driver's License (class A) with air-brake endorsement or the ability to obtain license within six (6) month probationary period is required.
• Preferably two (2) years' experience as a small equipment, auto and light truck mechanic or comparable education in formal auto mechanic training.
• Preferably five (5) years' experience as a small equipment, auto, and heavy truck/equipment mechanic.
• Preferably ten (10) years' experience as a small equipment, auto, and heavy truck/equipment mechanic.

Nice To Haves

• Tanker endorsement is preferred.
• ASE (Automotive Service Excellence) and EVT (Emergency Vehicle Technician) certifications are highly desired.
• ASE (Automotive Service Excellence) and EVT (Emergency Vehicle Technician) certifications.

Responsibilities

• Assists with the inspection, diagnostic and repair activities concerning minor repairs and maintenance of City vehicles and equipment (i.e., small engine repair and maintenance, brake relining, preventative maintenance, tire changing/balancing, equipment lubrication, oil change, etc.).
• Operates a variety of machinery, equipment and tools associated with repairing and maintaining vehicles and equipment which may include hoist, vehicle lift, jack, battery charger, air compressor, testing and diagnostic equipment, and other various mechanical tools.
• Assists with emergency service calls for disabled vehicles and equipment at work sites or on the road, as needed.
• Performs inspection, diagnostic and repair activities concerning minor repairs and maintenance of City vehicles and equipment (i.e., small engine repair and maintenance, brake relining, preventative maintenance, tire changing/balancing, equipment lubrication, oil change, etc.).
• Orders and collects needed parts from automotive shops; refers recommendations for major material/parts purchases to supervisor.
• Makes emergency service calls for disabled vehicles and equipment at work sites or on the road, as needed.
• Performs all of the functions of a Tech I listed above.
• Performs inspection, diagnostic and repair activities concerning major repairs and maintenance of City vehicles and equipment (i.e., small engine repair and maintenance, clutch installations, brake relining, preventative maintenance, tire changing/balancing, large truck tire repair, equipment lubrication, oil change, etc.).
• Estimates the cost and time of repairs and determines the most cost-effective methods.
• Performs all of the functions of a Tech I & II listed above.
• Performs inspection, diagnostic and repair activities concerning major repairs and maintenance of City vehicles and equipment (i.e., small engine repair and maintenance transmission repairs, clutch installations, brake relining, preventative maintenance, tire changing/balancing, large truck tire repair, equipment lubrication, oil change engine overhauling, etc.).
• Determines serviceability and replacement needs for vehicles and equipment.
• Schedules and coordinates work in serving all City departments; prioritizes work and determines what equipment and materials are necessary to accomplish work assignment.
• Estimates the cost and time of repairs and determines the most cost-effective methods.
• Coordinates with other City departments and implements preventative maintenance procedures and schedules.

Benefits

• Members shall receive a $500 payment upon achieving the City designated first level EVT certification and a $1000 payment upon achieving the designated second level EVT certification. Thereafter, the Emergency Vehicle Technician(s) shall receive $500 for each completed recertification of the first level EVT certification or $1000 for each completed recertification of the second level EVT certification.
• Details about the compensation and benefits for this position can be found in the agreement by clicking here.

What This Job Offers

• Job Type: Full-time
• Career Level: Entry Level
• Education Level: No Education Listed