Fitter

ND DEFENSE LLC•West Point, MS
•$0 - $27

About The Position

The Welder / Fitter lays out, fits, and welds steel and aluminum components and weldments for defense products built to customer drawings and military specifications. The role primarily involves out-of-position work, including sustained vertical and overhead welding on parts too large or awkward to rotate into flat or horizontal positions. The Welder / Fitter is responsible for the work from print to finished weld: reading drawings, setting up fit-ups, holding tolerances, producing welds that pass visual and nondestructive inspection, and documenting the work. The position involves fitting and layout, welding in multiple positions and processes, quality inspection and documentation, and following safety procedures. Work takes place in a manufacturing environment and may involve confined spaces or elevated work.

Requirements

  • High school diploma or GED.
  • Minimum of 3 years of production or structural welding and fitting experience.
  • Demonstrated ability to produce sound vertical-up and overhead welds on plate in at least one of GMAW, FCAW, or SMAW.
  • Ability to pass ND Defense's practical weld test in the 3G and 4G positions, including a bend test or visual acceptance as specified by the Weld Shop.
  • Ability to read blueprints and weld symbols and fit assemblies to drawing tolerances without direct supervision.
  • Working knowledge of shop math, including fractions, decimals, and angle calculation.
  • Proficiency with grinders, oxy-fuel and plasma cutting, and carbon arc gouging.
  • Must be a U.S. Person.

Nice To Haves

  • Current AWS D1.1 structural welder certification in the 3G and 4G positions.
  • Experience welding to military or NAVSEA requirements, such as MIL-STD-1689 or NAVSEA Technical Publication T9074-AS-GIB-010/271 and S9074-AR-GIB-010/278.
  • Aluminum welding experience (GMAW or GTAW) and/or AWS D1.2 certification.
  • Pipe welding experience (5G/6G).
  • Completion of a welding program through EMCC or another community college, technical school, or registered apprenticeship.
  • Overhead crane and forklift operator certification.
  • Experience in an AS9100 or ISO 9001 quality environment.

Responsibilities

  • Read and interpret engineering drawings, weld symbols, and basic GD&T to determine fit-up, joint design, and weld requirements.
  • Lay out, measure, and mark material; verify cut parts against prints before fit-up.
  • Fit and tack components using clamps, jigs, fixtures, and strongbacks to maintain dimensional tolerances and alignment.
  • Plan weld sequences and use distortion-control methods to keep weldments within tolerance.
  • Prepare joints by grinding, beveling, and back-gouging with hand grinders, oxy-fuel or plasma torches, and carbon arc gouging.
  • Safely rig and move material and assemblies using overhead cranes, hoists, and forklifts when authorized.
  • Perform vertical, overhead, flat, and horizontal welds on plate and structural shapes using GMAW, FCAW, and SMAW processes.
  • Weld groove and fillet joints, including complete joint penetration welds, according to the applicable WPS.
  • Set up and adjust welding equipment according to the WPS.
  • Maintain and record interpass temperatures and preheat requirements when required.
  • Identify and repair weld discontinuities, including porosity, undercut, lack of fusion, and cracking.
  • Inspect own work against drawings and acceptance criteria, support QA with NDT, and correct rejected welds.
  • Maintain material and weld traceability, including heat numbers, welder ID stamping, and travelers as required.
  • Follow safety rules and wear required PPE during overhead, hot work, confined-space, and elevated work.
  • Keep the work area, tools, and equipment clean, organized, and in good repair; report equipment problems promptly.
  • Maintain welder qualification continuity by welding regularly in qualified processes and positions.
  • Perform other related duties as assigned.
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service