Finisher/Rotofiler - 1st Shift

PCC Talent Acquisition Portal•Groton, CT

2d•Onsite

About The Position

Under close supervision, performs a variety of rotofiling, grit blasting, hand and bench grinding operations to remove casting defects and smooth and finish the surface of welded castings. Works to appropriate process control and quality procedures for finishing operations. Reads and follows shop traveler instructions. Operates manual and automatic grit blast equipment and handheld pneumatic and bench grinding tools and equipment. Selects appropriate tool to perform basic and routine exterior and interior surface finishing, scraping, deburring, to remove visual casting defects from the part. Performs "dig out" on selected castings according to NDT Department instructions. Selects and correctly mounts proper tool in burr gun. Also determines what will be removed by belt clean up. Manipulates tool or parts to remove unwanted metal. May perform simple dimensional inspections. Prepares the casting defect area for weld repair by grinding proper weld repair cavity. Exercise care in handling and operation to avoid surface damage, cracking or over stressing of parts and to obtain required finish, dimensional and inter-relational tolerances. Detect and report defective parts or unusual conditions to lead or supervisor. Perform job functions within training and ability as assigned by lead or supervisor to meet daily throughput goals. Follow all prescribed safety procedures and wear PPE as prescribed in Hazard Assessment Form for the job. Maintain work area and equipment in a clean and orderly condition.

Requirements

Requires the use of shop math plus decimals, fractions, formulas, specifications charts, tables, and adjustable measuring instruments requiring interpretation, preparations and posting.
6 months of manufacturing experience.
Requires eye hand visual and manual dexterity to operate manual grinding tools along with continuous mental or visual attention requiring alertness.
Physical demands to lift up to 20 lbs frequently and 50 pounds occasionally.
Must be able to wear PPE for finishing and grinding.

Nice To Haves

Requires the use of judgment to plan, perform, and make decisions within standard procedures.

Responsibilities

Works to appropriate process control and quality procedures for finishing operations.
Reads and follows shop traveler instructions.
Operates manual and automatic grit blast equipment and handheld pneumatic and bench grinding tools and equipment.
Selects appropriate tool to perform basic and routine exterior and interior surface finishing, scraping, deburring, to remove visual casting defects from the part.
Performs "dig out" on selected castings according to NDT Department instructions.
Selects and correctly mounts proper tool in burr gun.
Determines what will be removed by belt clean up.
Manipulates tool or parts to remove unwanted metal.
May perform simple dimensional inspections.
Prepares the casting defect area for weld repair by grinding proper weld repair cavity.
Exercises care in handling and operation to avoid surface damage, cracking or over stressing of parts and to obtain required finish, dimensional and inter-relational tolerances.
Detects and reports defective parts or unusual conditions to lead or supervisor.
Performs job functions within training and ability as assigned by lead or supervisor to meet daily throughput goals.
Follows all prescribed safety procedures and wears PPE as prescribed in Hazard Assessment Form for the job.
Maintains work area and equipment in a clean and orderly condition.