Equipment Operator IV

State of Delaware•Dover, DE

7d•Onsite

About The Position

These positions serve as crew/project leaders, and are skilled at precision operation of the most complex mobile equipment with attachments of significant weight and complexity to accomplish the most complex equipment operations and assignments/projects. Perform with indirect supervision, review of work typically occurs after completion or when problems or exceptions occur. This position must be available to work overtime as needed, and during storm events and other emergency events on short notice, and in some cases, no advance notice. During inclement weather, this position also includes snow removal responsibilities.

Requirements

Six months experience in operating self-propelled mobile equipment with wheeled or crawler type traction work to fine specifications on all types of terrain.
Six months experience in constructing drainage systems for storm water management, road maintenance and construction.
Six months experience in evaluating and establishing traffic controls in a work zone.
Six months experience in preventative maintenance on vehicles and equipment which includes lubricating, cleaning, and servicing.
Knowledge of record keeping.
Possession of a valid CDL Class B Driver's License with Airbrake Restriction (not suspended, revoked or cancelled, or disqualified from driving).

Nice To Haves

As a prerequisite to qualifying for the Equipment Operator IV level, the individual must be a DelDOT Operator III, OR, have been a DelDOT Operator III within the past 2 year period from which the individual left the position in good standing.
Every Equipment Operator III must, at a minimum, obtain DelDOT certification to operate: 1. Four 400 series equipment pieces, identified in the Certification Manual, which must be needed for production in the individual’s area of assignment and must be approved by the District Engineer or a designee. “Float Crew pieces” of equipment may be used if both the employee and the District Engineer agree and make the necessary arrangements. AND The Equipment Operator III must regularly operate in situations where he/she is required to be a project leader (i.e. to self-manage.) This operator works independently and is solely responsible for effectiveness of the specific task. Examples of project leader include equipment operator utilizing; a truck tractor 5th wheel with Low Boy combinations, a pothole patcher, or a street sweeper. The project leader duties would include planning, scheduling, effectively performing the operation, and recording of work accomplished.
OR 2. Two, 400 series plus three additional equipment pieces, identified in the Certification Manual, which must be needed for production in the individual’s area of assignment and must be approved by the District Engineer or a designee. The additional equipment pieces will be any combination of 300 or 400 series. If 300 series equipment is used it must be in addition to the equipment used to certify on for the promotion to Equipment Operator III. “Float Crew pieces” of equipment may be used if both the employee and the District Engineer agree and make the necessary arrangements. AND Have satisfactorily served as equipment intensive crew leader on assignments. A crew leader is responsible for the effectiveness of a work crew of three or more equipment operators. An example of a crew leader is the lead operator of a mowing, crack sealing, tar and chip, or a divided highway snow removal crew.
NOTE: Any past certification that had taken place using previous Operator Certification Manual criteria will stay in effect. If the certification number has changed, the operator may only apply credit towards promotional requirements for either, the old certification or the new certification number, not both. In determining promotional eligibility Operators must maintain the minimum certifications that were used for previous promotions without duplicate application of credit. Any new certification will follow the requirements of the Equipment Operator Manual.
Applicants may only apply if they are current permanent employees of the Department of Transportation in a position covered by the Merit System who have completed their initial probationary period.

Responsibilities

Drives and controls on/off-road equipment to haul supplies to and from the work site. This may include public highway systems.
Manipulates equipment with integrated mechanical, hydraulic, and electronic systems/controls by coding computers and or adjusting levers, gears, valves, switches and related controls.
Operates mobile equipment and hand tools to dig, ditch, slope, strip, grade, backfill, mow, and clear and excavate.
Loads and unloads rock, debris, earth, trees and materials, such as abrasives, de-icing chemicals/hazardous material using hands, loaders, trucks, hand-truck, forklift, dolly-lift and hoist.
Operates hand tools such as jackhammers, mechanical tampers, power saws, air compressors, hydraulic drivers, and similar equipment to make general repairs of roads, grounds, and/or structures.
Performs construction/maintenance and repairs in a variety of labor/trades fields such as carpentry, welding, and masonry.
Responds to environmental/highway emergency situations to control snow, storm water, hazardous debris, oil spills, etc. on roads, grounds and related areas.
Uses traffic control techniques to control high/low speed vehicular traffic movements.
Performs preventive maintenance, operational checks, pre, and post walk around inspections, and makes minor repairs/adjustments of assigned equipment; reports damage and /or required maintenance.
May operate draw and swing bridges to permit both water and roadway traffic to pass safely.