Eng Tech I (Operations)

Pantex•Amarillo, TX
•Onsite

About The Position

The Eng Tech I (Operations) assists technical and scientific personnel on production support, research, and development projects. Under general supervision, the role performs assigned work accurately, follows operating and safety procedures, inspects and maintains equipment, keeps work areas safe and orderly, and produces accurate records and reports. The technician reports defects, malfunctions, and unusual occurrences, supports improvements to safety and productivity, and assists professional staff and other Engineering Technicians with procedures, training, and problem identification. Duties include handling hazardous materials in accordance with prescribed safety procedures and complying with applicable environmental, safety, health, security, DOE, corporate, and plant requirements. For the Advanced Fabrication Facility Inspector assignment, the technician performs in-process and final inspections of manufactured components and assemblies against drawings and specifications. The work includes operating Coordinate Measuring Machines (CMMs) with PC-DMIS software, supporting the setup, validation, and optimization of inspection routines, performing shop-floor programming on non-critical components, and using hand measurements, visual analysis, and go/no-go gauges. The technician interprets GD&T and marking instructions, works from sketches, assembly drawings, and procedures, records inspection results, and dispositions components based on inspection findings. The position requires the ability to work with metric and English dimensions and to inspect inert components using precision measuring instruments. The position requires the ability to obtain and maintain a Department of Energy Q clearance and Human Reliability Program (HRP) certification. Candidates accepting an offer must pass a pre-placement physical, drug screening, and background investigation. The role is subject to random drug testing and may involve prolonged or irregular hours and shift work.

Requirements

  • Must be able to perform the duties and functions described for the position.
  • Must meet initial employment requirements and have qualifications, work history, training, and education verified by former employers or documented proof.
  • Must be able to read, write, and comprehend applicable written and oral instructions.
  • Must meet the education and experience requirements for the assignment.
  • Must be physically fit to perform the job functions, as determined by medical evaluation.
  • Must have no documented quality or safety issues during the most recent 18-month period.
  • High school diploma or GED.
  • Experience operating CMM equipment and performing shop-floor programming using PC-DMIS; inspection techniques and familiarity with PC-DMIS software and/or PC-DMIS certifications; working knowledge of hand-measurement instruments such as calipers and micrometers; and the ability to perform the inspection duties described.
  • Alternatively, a combination of the listed experience satisfactory to line management in performing the job functions may qualify.
  • Ability to obtain and maintain a DOE Q clearance; U.S. citizenship is required for security clearance applicants.
  • Must obtain and maintain Human Reliability Program (HRP) certification in the appropriate category.
  • Must pass a pre-placement physical, drug screening, and background investigation; employees are subject to random drug testing.
  • Ability to lift or carry 40 pounds, push or pull for one hour per day, reach above shoulder level, keyboard, perform repetitive wrist or forearm motion, walk two hours per day, and stand two hours per day.
  • Normal far vision in at least one eye, correctable to 20/40; near vision sufficient to read a screen or printed material at approximately 13–16 inches; and depth perception.
  • Ability to use small tools and perform safety-sensitive duties.
  • No evidence of current drug or alcohol abuse.

Nice To Haves

  • Manufacturing background.
  • Knowledge of GD&T.
  • PC-DMIS software familiarity or PC-DMIS certifications.

Responsibilities

  • Assist technical and scientific personnel with production support, research, and development projects.
  • Check equipment for proper operation and condition; report defects or malfunctions.
  • Assist with developing and improving methods to increase safety and productivity.
  • Maintain assigned work areas in a safe and clean condition and protect equipment, records, and procedures through proper housekeeping.
  • Work with Engineering Technicians of all levels to become familiar with and perform relevant processes, techniques, and procedures.
  • Perform assigned work accurately under general supervision and produce legible, correct inspection, analysis, and other records.
  • Follow operating procedures and standards, especially those related to safety and security.
  • Maintain, adjust, and service assigned equipment according to applicable standards, manuals, or directions.
  • Observe and report unusual occurrences or events that could affect safety, quality, experiments, or operations.
  • Assist professional staff in identifying problems and establishing improved procedures and techniques.
  • Handle explosive, toxic, flammable, or other hazardous materials by precisely following safety procedures.
  • Ensure operations comply with applicable environmental, safety, health, and management requirements.
  • Assist with training other Engineering Technicians as assigned.
  • Maintain knowledge of applicable federal, state, DOE, corporate, and plant rules, regulations, labor agreements, and operating policies and procedures.
  • Attend and successfully complete required training and safety meetings; participate in worker involvement, hazard identification, and work-planning activities; understand and exercise the right to stop unsafe work.
  • Perform shop-floor programming on non-critical components as needed to meet drawing specifications.
  • Validate manufactured component specifications using open-set-up programming, hand measurements, visual analysis, and/or go/no-go gauges.
  • Execute CMM programs using PC-DMIS software to conduct dimensional inspections of parts and assemblies.
  • Collaborate with engineers and production teams to improve inspection processes and reduce defects.
  • Validate and support optimization of CMM programs and inspection routines; assist the CMM programmer with new-routine setup and provide feedback.
  • Interpret GD&T callouts and marking instructions for manufactured components.
  • Conduct in-process and final inspections against drawing specifications and maintain accurate inspection records and reports.
  • Work from sketches, assembly drawings, and detailed procedures to perform inspection operations.
  • Inspect and assemble experimental devices requiring complicated setups, using precision measuring instruments with a high degree of accuracy.
  • Set up and operate CMMs to inspect inert components for required geometry and tolerances.
  • Work with metric or English dimensions and determine component disposition based on inspection results.
  • Perform other duties as assigned.

Benefits

  • Comprehensive health coverage.
  • Retirement planning.
  • Education reimbursement.
  • Opportunities for continuous learning and professional growth.
  • Work flexibility intended to support work-life balance.
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service