Electronic Measurement Equipment Mechanic

Army National Guard Units • Ayer, MA

7d

About The Position

THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a ELECTRONIC MEASUREMENT EQUIPMENT MECHANIC, Position Description Number PDD1201000 and is part of the MA ARNG CSMS, National Guard. This is a Non-Bargaining Unit position. The unit point of contact and contact phone for this position is: MSG Kevin Baker, 339-265-3047.

Requirements

• NATIONAL GUARD MEMBERSHIP IS REQUIRED.
• This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
• Selectee will be required to wear the military uniform.
• Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
• Males born after 31 December 1959 must be registered for Selective Service.
• Federal employment suitability as determined by a background investigation.
• May be required to successfully complete a probationary period.
• Participation in direct deposit is mandatory.
• Favorable background check is required.
• Incumbent must possess or be able to acquire the appropriate level security clearance for this position.
• Military Grades: ENL: SPC to SFC
• Compatible Military Assignments: MOS: 25, 26, 51, 88, 89, 91, 92
• All applications will be considered regardless of Branch MOS
• AREA OF CONSIDERATION : Open to current members of the Massachusetts Army National Guard.
• NATIONAL GUARD MEMBERSHIP IS REQUIRED : This is an excepted service position that requires membership in a compatible military assignment in the National Guard.
• Selectee will be required to wear the military uniform.
• Acceptance of an excepted service position Constitutes concurrence with these requirements as a condition of employment.
• Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.
• If you are not sure you are eligible for military membership, please contact a Massachusetts Army National Guard recruiter prior to applying for this position.
• GENERAL EXPERIENCE: Must have experience, education or training which demonstrates a working knowledge of electronic principles involved in the generation and measurement of such elements as voltage, current, impedance, capacitance, frequency, and inductance. Experience in the use of various precision measurement instruments and standards.
• SPECIALIZED EXPERIENCE: Must have at least 18 months experience or training with basic application of operating principles such as the production and utilization of oscillations over a broad range of frequencies; signal and waveform behavior, distortion, and amplification; pulse, trigger, and synchronization techniques; digital/analog processing and data conversion techniques; and a variety of display and indication methods. Experience in tracing signals and voltage paths, and skilled in the analysis of waveform characteristics such as timing, duration, frequency, and phasing. Originates test set-ups to isolate malfunctions and check performance characteristics of special or unique test panels or mockups. Experience in interpreting and applying a variety of technical electronic information such as schematic symbols, mathematical expressions and formulas, calibration procedures, and other reference materials. Experience in applying established techniques and methods of repair, testing, alignment, and calibration of equipment, which serves as test equipment or precision measurement standards. Experience in utilizing electronic circuits to measure electronic or electrical quantities to determine the performance characteristics and accuracy of other instruments and equipment.

Nice To Haves

• If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( https://www.sss.gov/RegVer/wfRegistration.aspx ).
• MILITARY INCENTIVES - BONUSES AND STUDENT LOAN REPAYMENT PROGRAM : If you are selected for this position, you may lose your eligibility for your National Guard Enlistment/Reenlistment Bonus and Student Loan Repayment Program incentives. In order to avoid losing your incentive eligibility, you should check with your incentives manager prior to accepting an offer for the position.
• For M-Day/Traditional personnel who are currently receiving incentives to include Bonuses and the Student Loan Repayment Program incentive, the following termination rule applies: Incentive Termination without Recoupment: If you accept an Active Guard Reserve (AGR) position or a Military Technician (Mil Tech) Permanent or Indefinite position after 25 February 2010 where membership in the National Guard is a condition of employment, your bonus will be terminated with no recoupment.
• Fair Chance to Compete for Jobs Act of 2019 An employee of an agency may not request, in oral or written form, that an applicant for an appointment to a position in the civil service disclose criminal history record information regarding the applicant before the appointing authority extends a conditional offer to the applicant.
• An applicant may submit a complaint, or any other information, to an agency within 30 calendar days of the date of the alleged non-compliance by an employee of an agency.
• To file a complaint please click this link and scroll to the bottom of the page for more information.
• Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

Responsibilities

• Calibrates and repairs TMDE within support capability and authority including various levels of calibration as designated in technical bulletins, manuals, etc.
• Performs functional electronic, physical, and radioactive testing involving interpretation and analysis of measurement data, in accordance with cyclic inspection requirements.
• Aligns, troubleshoots, tests, inspects, repairs, modifies, calibrates and certifies precision measurement equipment such as multimeters, microwave equipment, oscilloscopes, temperature analyzers, mercurial barometers, gage blocks and micrometer caliper dimensional equipment, digital voltmeters, signal generators, torque wrenches, pressure gauges, torque testers, weight scales, electronic counters, radiation monitors, radix calibrators, and radiation dosimeters.
• Analyzes and isolates component malfunctions; calculates and determines tolerances; and performs tests and calibrations in accordance with instructions, which are often vague and incomplete, and may require the preparation of diagrams and instructions to facilitate the calibration action.
• Sets up system test sets and various types of test equipment such as frequency meters, standing wave ratio meters, radio frequency (RF) power meters, function/ arbitrary waveform generator, distortion analyzers, time frequency work stations, oscillators, voltmeters, electronic counters, oscilloscopes, attenuators, decade resistors and capacitors, signal generators, stroboscope, tachometers, pneumatic and hydraulic pressure standards and other physical and electronic tests.
• Diagnoses equipment, makes repairs, and replaces defective parts/components such as integrated circuits, printed circuit boards, electronic condition coils, radiation detector boards/circuits, crystals, transistors, tubes, transformers, condensers, diodes, relays potentiometers, and related components.
• Following repair, tests by applying signals in known amplitude and wave shape into oscilloscopes to observe wave pattern.
• Isolates faults by taking measurements and comparisons in voltage, amperage, ohms, henries, power factor, watts, temperature, humidity, microns, foot-pounds, decibels, sensitivity, noise, stability, Voltage Standard Wave Ratio (VSWR), impedance, phase, absolute pressure, time intervals, displacement, flow rate, etc., to determine performance of equipment.
• If signal is distorted, traces it through electronic stages to locate malfunctioning part.
• Checks sweep rate by feeding known signal to an oscilloscope and observing wave pattern to correct shape and size.
• Adjusts with trimmer potentiometers; and if calibration is still not possible, adds or removes sufficient resistance to permit balancing of circuit.
• Uses equipment schematics to analyze circuits by preparing block diagram showing major components such as amplifiers, filters, oscillators and indicators.
• Determines purpose in operation characteristics of each major section.
• Refers to technical manuals and manufactures specifications to obtain information on operation characteristics of circuit components such as integrated circuits, microprocessors, decoders, latching networks, notch filters, logics, controllers, programmable gain amplifiers, digital displays, transistors, tubes, transformers, coils, relays, motors, and similar devices.
• Disassembles, cleans and inspects parts such as printed circuit boards, resistors, capacitors, integrated circuits, relays, chambers, cables, and wiring for evidence or wear or malfunction.
• Uses special test devices and radioactive samples or other calibrated sources.
• Tests equipment for sensitivity and correct operation.
• Makes radiation calculations/readings at various distances from the standard ensuring radiation equipment is operating in specified parameters.
• Performs contamination/radiation surveys on radiation equipment to control/eliminate radiation leakage/contamination.
• Completes necessary Army Maintenance Management System (TAMMS), calibration, radiation reports and other records and forms on work completed.
• Ensures maximum number of weapons systems are operationally ready.
• Uses TMDE Integrated Maintenance Management Systems (TIMMS) for all supported equipment to track, turn-in, repair, calibrate, and return to the end user in a timely fashion to prevent work stoppages.
• Furnishes technical data to the supervisor for inclusion in reports as well as recommending equipment improvement and solutions for unusual problems related to testing and the use of precision TMDE.
• Follows appropriate safety procedures, with special care being exercised while calibrating high voltage, radio frequency, radioactive sources and high-pressure instruments and gages.
• Performs and interprets wipe tests on radiation sources for possibility of radiation hazards.
• Familiar with and abides by all Federal and State regulations concerning handling, transportation and disposal of radioactive waste or devices.
• Performs other duties as assigned.

Benefits

• A career with the U.S. government provides employees with a comprehensive benefits package.
• As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding.
• Opens in a new window Learn more about federal benefits .
• Review our benefits
• Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent.
• Contact the hiring agency for more information on the specific benefits offered.

What This Job Offers

• Job Type: Full-time
• Career Level: Entry Level
• Education Level: No Education Listed