Electrical Engineer, Sensing

Weave Robotics•San Francisco, CA

About The Position

Weave builds and deploys bimanual robots operating in customer homes. These robots use sensors beyond cameras to support their capabilities and safety. The Sensing Engineer owns sensors end-to-end, from emitter and detector electronics and analog front ends through processing and calibration for firmware, software, and autonomy teams. The work spans analog design and signal processing and is not limited to particular sensing modalities. Modalities may vary between robot generations, including optical, magnetic, and capacitive sensors; sensors may be embedded in soft materials, woven into fabric, or mounted near motors. The role takes sensors from evaluation through production.

Requirements

  • At least 3 years of experience spanning sensing hardware and signal processing.
  • Have taken at least one sensor from schematic through a shipped, calibrated signal.
  • Experience designing analog front ends and mixed-signal systems, including signal conditioning, grounding and shielding, and layout for low-level signals near high-current components across multiple channels.
  • Knowledge of signal processing and estimation fundamentals, including filtering, spectral analysis, and state estimation.
  • Experience with inverse problems where the desired quantity is a nonlinear function of measurable data, and understanding of the physics underlying sensor behavior.
  • Experimental discipline, including designing measurements before algorithms and supporting claims with error bars.
  • Experience with more than one sensing modality, or demonstrated ability to learn the physics of a new modality quickly.
  • Experience with EtherCAT, CAN/CAN FD, SPI, and I²C communication protocols.

Nice To Haves

  • Depth in optical emitter/detector chains, including TIAs, ambient rejection, or modulated ranging.
  • Depth in magnetic sensing, including magnetometer arrays or field modeling.
  • Experience with capacitive or resistive sensing in textiles, force sensing, inertial sensing, or acoustic sensing.
  • Flex-PCB, electrode, or sensor-in-mechanism design in collaboration with mechanical teams, particularly for sensing in soft or moving structures.
  • Production calibration experience, including fixture design and station software.
  • Experience with sensors feeding closed-loop control under contractual latency and noise budgets.
  • Laser eye-safety classification and compliance experience.
  • Fluency in Rust or Python and C/C++, using Python for analysis and prototyping and production languages for real-time embedded implementations.

Responsibilities

  • Own the architecture, electronics, sampling, signal processing, calibration, and production testing for the robot’s time-series sensing, selecting sensors based on what the robot needs to sense.
  • Design analog front ends, emitter-drive and detector-receive chains, mixed-signal circuits, and multichannel arrays, including multiplexing, sampling synchronization, and timestamping suitable for state estimators.
  • Develop filtering, bias and temperature compensation, drift handling, outlier rejection, detection, and estimation algorithms, including inverse models for recovering contact and geometry from measurable data.
  • Characterize sensors by designing fixtures and experiments to measure noise, drift, crosstalk, hysteresis, latency, and failure modes, and create models from those measurements for use by algorithms.
  • Build per-unit calibration routines for manufacturing-line and field use.
  • Develop sensor health monitoring that distinguishes degraded sensors from changes in the environment and attaches confidence estimates to signals.
  • Prototype candidate sensing modalities and provide hardware and product teams with data-backed evaluations.
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service