Dryer Production Associate - Nights - Springfield Plywood

Swanson Group, Inc.•Springfield, OR
•Onsite

About The Position

The Dryer Feeder keeps the veneer dryer at least 97% full of quality veneer by feeding sheets into the dryer while maintaining safety and quality. The worker moves back and forth on a platform in front of stacks of green veneer, keeping pace with the dryer and following the Job Hazard Analysis, Standard Operating Procedures, and supervisor direction for safe and efficient plant operation. The position involves feeding and aligning individual veneer sheets, maintaining the height of veneer on a scissors platform using pedals and buttons, and clearing or assisting with jams under required lockout/tagout procedures. The worker may rotate among dryer positions, assist coworkers or maintenance personnel with basic maintenance and plug-ups, perform weekly machine maintenance and cleaning, clean the work area during downtime and shift changes, and communicate by radio when the dryer is down. Work is primarily indoors (90%) and partly outdoors (10%). The indoor environment averages 80°F, with possible temperatures from 10°F to 105°F. The worker stands on a slightly elevated, approximately 4-foot-wide and 14-foot-long wooden or metal platform with rubber mats. The area has machine and nearby forklift noise, limited dust, water mist, and dry-wood odors. Required protective equipment includes eye and hearing protection, approved footwear, and blue Atlas gloves when feeding re-dry veneer. The role requires continuous standing and walking, hearing and vision, and use of arms, wrists, and hands; frequent twisting, grasping, and foot-control operation; and frequent or occasional bending, reaching, crouching, kneeling, climbing, and other movements as described in the physical capabilities information. The maximum weight lifted without assistance is 50 pounds. Loads over 50 pounds require assistance from two or more people and/or lifting devices. The worker may push or pull objects weighing up to 75 pounds over a distance of four feet.

Requirements

  • Successfully complete structured job training and testing to become a certified operator.
  • Have excellent hand-eye coordination.
  • Use vision and hearing continuously and have peripheral vision to see trays and coworkers.
  • Be able to read and speak to understand and communicate about the Job Hazard Analysis, machine-specific lockout procedures, and safety training; reading and writing are required during safety training.
  • Work generally with another puller and with little supervision; be self-directed in identifying and efficiently completing tasks.
  • Be able to prioritize, organize, and make necessary decisions.
  • Follow safety procedures, including performing only trained maintenance, keeping body parts out of machinery, using the 14-step lockout/tagout procedure before maintenance or clearing jams, accounting for stored energy, using proper body mechanics, wearing PPE, and communicating with coworkers.
  • Meet the physical demands described in the posting, including continuous standing and walking, frequent use of arms and hands, and lifting up to 50 pounds without assistance.

Responsibilities

  • Feed individual veneer sheets into the dryer and keep it at least 97% full in accordance with production needs and supervisor expectations.
  • Move along the platform, push and align sheets, remove overlaps, ensure sheets are unstacked, and discard wane sheets as necessary.
  • Use pedals and buttons to move green veneer onto the scissors platform and maintain the proper platform height.
  • Remove or assist with removing dryer jams or blockages, following lockout/tagout procedures and using the dryer’s manual button operating system for power control.
  • Break other dryer employees and rotate to other positions for cross-training or production needs as directed by the supervisor.
  • Assist coworkers or maintenance personnel with basic maintenance and dryer plug-ups; perform weekly greasing and oiling as needed.
  • Perform routine weekly dryer cleaning, including removing machine parts, hosing debris from inside the dryer, sorting and shoveling debris into appropriate waste boxes, and replacing cleaned parts.
  • Clean veneer scrap and debris from the work area during downtime, changeovers, and between shifts using a broom, rake, or shovel.
  • Communicate by radio when the dryer is down.
  • Perform other production and cleaning duties as assigned by the supervisor.
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service