Design/Detail II

Collins and Jewell•Bozrah, CT

5d•$28 - $38•Onsite

About The Position

Produce detailed drawings for steel fabricators and steel erectors. The detailer prepares detailed plans, drawings and other documents for the manufacture and erection of steel members (columns, beams, braces, trusses, stairs, handrails, joists, metal decking, etc.) used in the construction of industrial plants, and various non-building structures. Job Requirements may include the following. Per the direction of the Design and Detailing Manager, other duties may be assigned to the position. Represent Collins & Jewell Company Inc properly including professional behavior and professional written and spoken correspondence. Adhere to all company policies including Safety, HR, etc. in a way that sets an example to all other employees. Uphold shared company responsibility by properly reporting and/or mitigating unprofessional, unsafe, or other behavior which infringes upon Collins & Jewell Company Inc policy. Understand and properly operate within the Collins & Jewell Company Inc chain of command. Work closely with Design/Detailing Manager, Project Managers, Architects, Engineers, General Contractors, and Steel Fabricators to prepare/submit final erection drawings and shop drawings. Serve as a support analyst and operate complex 3D modeling systems such as TEKLA, Solid-works, AutoCAD, etc. Comply with the requirements of the design drawings and with all industry standards and protocols, such as those established by the American Institute of Steel Construction (AISC) and the American Welding Society (AWS). Comply with current OSHA and IBC building codes. Provide support in editing standards and company procedures that relate to detailing. Suggest changes to the structural engineer, Production Manager, Design/Detailing Manager, and Project Managers in cases where the structural drawings have insufficient information. Keep track of changes during the drawing creation workflow: the revisions are identified by incrementing an associated number or letter code which should appear in the drawing revision block (Document Control through Revision). Prepare approval, construction, and shop drawings for projects with the use of TEKLA, Solid-works Modeling and AutoCAD Accurately complete and check all necessary system input for finalization of fabrication drawings, shop details, and Bill of Materials. Accurately check the work of other Detailers. Communicate complex and technical application issues to non-technical parties verbally and/or written. Meet deadlines on a regular basis. Maintain a high level of accuracy and quality while managing multiple projects. Establish and maintain effective working relationships with co-workers while demonstrating courteous and professional office etiquette. Be self-motivated, self-driven and a team player. Make decisions based on the best interests of the company. Report to jobsite as needed to take necessary field measurements to ensure accuracy of project details.

Requirements

Bachelor’s or associate degree in Drafting/ CAD/ Graphics Design/ Architectural/ Structural / Mechanical Engineering, architecture, or equivalent preferred.
3-5 years of experience in 3D systems (may substitute a bachelor’s degree)
Experience with steel fabrication and installation (preferred).
Relevant detailing experience and knowledge in structural and miscellaneous steel (preferred).
Experience using and working with Tekla, familiarity with AutoCAD and SolidWorks (preferred).
Advanced knowledge of 3D Modeling.
Advanced knowledge of creating components and reports within the 3D Systems to improve efficiency.
Advanced knowledge of structural steel detailing (this includes the ability to read design drawings).
Advanced knowledge of 3D Modeling Software; Tekla Structures, Solid-works and AutoCAD.
Understanding of steel purchasing, fabrication and erection operations.
Good perception of and visualization of structural assemblies.
High attention to detail.
Basic mathematics including geometry and trigonometry.
Programming experience is a plus.
Ability to provide cost effective and value adding solutions.
Proficiency in the use of Microsoft PC's, MS Office applications.
Energetic person who interacts well with a diverse staff and client base.
Highly motivated, proactive, and able to work independently.
Comfortable taking the initiative in system development, problem solving, internal and external office communications.
Flexible and accommodating in adapting to shifting priorities.
Professional work ethic, positive attitude, and openness to new challenges.
Demonstrate ability regarding, attention to detail, organization, and a creative problem solver.
Maintain composure and enjoy working in an evolving environment.
Proving ambitions of self-improvement and the willingness to cross train in responsibilities of other departments.

Nice To Haves

Experience with steel fabrication and installation.
Relevant detailing experience and knowledge in structural and miscellaneous steel.
Experience using and working with Tekla, familiarity with AutoCAD and SolidWorks.
Programming experience is a plus.

Responsibilities

Produce detailed drawings for steel fabricators and steel erectors.
Prepare detailed plans, drawings and other documents for the manufacture and erection of steel members (columns, beams, braces, trusses, stairs, handrails, joists, metal decking, etc.) used in the construction of industrial plants, and various non-building structures.
Represent Collins & Jewell Company Inc properly including professional behavior and professional written and spoken correspondence.
Adhere to all company policies including Safety, HR, etc. in a way that sets an example to all other employees.
Uphold shared company responsibility by properly reporting and/or mitigating unprofessional, unsafe, or other behavior which infringes upon Collins & Jewell Company Inc policy.
Understand and properly operate within the Collins & Jewell Company Inc chain of command.
Work closely with Design/Detailing Manager, Project Managers, Architects, Engineers, General Contractors, and Steel Fabricators to prepare/submit final erection drawings and shop drawings.
Serve as a support analyst and operate complex 3D modeling systems such as TEKLA, Solid-works, AutoCAD, etc.
Comply with the requirements of the design drawings and with all industry standards and protocols, such as those established by the American Institute of Steel Construction (AISC) and the American Welding Society (AWS).
Comply with current OSHA and IBC building codes.
Provide support in editing standards and company procedures that relate to detailing.
Suggest changes to the structural engineer, Production Manager, Design/Detailing Manager, and Project Managers in cases where the structural drawings have insufficient information.
Keep track of changes during the drawing creation workflow: the revisions are identified by incrementing an associated number or letter code which should appear in the drawing revision block (Document Control through Revision).
Prepare approval, construction, and shop drawings for projects with the use of TEKLA, Solid-works Modeling and AutoCAD.
Accurately complete and check all necessary system input for finalization of fabrication drawings, shop details, and Bill of Materials.
Accurately check the work of other Detailers.
Communicate complex and technical application issues to non-technical parties verbally and/or written.
Meet deadlines on a regular basis.
Maintain a high level of accuracy and quality while managing multiple projects.
Establish and maintain effective working relationships with co-workers while demonstrating courteous and professional office etiquette.
Be self-motivated, self-driven and a team player.
Make decisions based on the best interests of the company.
Report to jobsite as needed to take necessary field measurements to ensure accuracy of project details.