About The Position

The Corrosion Control Technician inspects and maintains cathodic protection systems and equipment to control corrosion and ensure compliance with applicable regulations, policies, and procedures. The discipline applies chemistry, electricity, physics, metallurgy, and other sciences to mitigate corrosion damage and address the mechanical, electrical, and chemical factors involved in material deterioration. The position covers a progression from Corrosion Apprentice/Trainee through Corrosion Technician I, II, and III. An apprentice receives training and development toward a career in corrosion control; duties and level of independence increase through the technician levels, including progressively more advanced system design, troubleshooting, surveys, contractor oversight, and support for less experienced technicians. The work is assigned to an operational area and includes cathodic protection troubleshooting, remediation work orders, rectifier and half-cell maintenance, compliance record monitoring, reporting, project inspection and support, and participation in regulatory audits. Depending on level, the technician may also perform or analyze indirect surveys, provide contractor oversight and scheduling direction, and conduct OQ evaluations of lower-level technicians. The position involves frequent local travel and occasional overnight travel (5–20%). Work takes place in office and field environments and may involve moving mechanical parts, fumes, airborne particles or chemicals, varying outdoor weather, and excessive noise. Physical activities include prolonged standing or walking, reaching above shoulder level, bending, kneeling, crouching, or crawling, and lifting up to 50 pounds.

Requirements

  • Apprentice and Technician I: Associate degree from a technical or trade school with a math-, electrical-, or science-based curriculum, or a high school diploma with an equivalent combination of education and experience; the Corrosion Control Management Team evaluates equivalent qualifications.
  • Technician II and III: Associate degree from a technical or trade school with a math-, electrical-, or science-based curriculum, or a high school diploma with an equivalent combination of education and experience; the Corrosion Control Management Team evaluates equivalent qualifications.
  • Valid driver’s license.
  • Apprentice: Successfully complete company-designated corrosion control apprentice training and be evaluated to Technician I within 180 days; otherwise, the employee must vacate the position.
  • Technician I: One year of corrosion control experience, or successful completion of company-designated Corrosion Apprentice/Trainee training and Technician I evaluation.
  • Technician II: NACE CP1 certification and NACE Corrosion Technician Certification or company-designated equivalent.
  • Technician II: Three years of pipeline cathodic protection or corrosion control experience.
  • Technician III: NACE CP2 certification and NACE Corrosion Technologist Certification or company-designated equivalent.
  • Technician III: Six years of pipeline cathodic protection or corrosion control experience.
  • For all levels: Intermediate proficiency with the Microsoft Office Suite; attention to detail; intermediate organizational skills; ability to read and understand codes, standards, and procedures; intermediate knowledge of basic electrical principles; intermediate mathematics aptitude in algebra and geometry; problem-solving skills; critical thinking; and data analysis.
  • Technician I, II, and III: Electrical knowledge, including Ohm’s Law.
  • Technician II and III: Proficiency with Pipeline Compliance System (PCS), field data loggers such as Allegro or MESA 3 Tablet, and Geographic Information System (GIS).
  • Frequently travel locally, with occasional overnight travel (5–20%); work in office and field environments; and meet the stated physical demands, including lifting up to 50 pounds.
  • Technician I progression: may be evaluated for Technician II after at least one year in the Technician I role; progression deadlines differ by bargaining unit and may require vacating the role if not met.
  • Technician II progression: may be evaluated for Technician III after at least one year in the Technician II role and meeting all requirements; progression is not required.

Nice To Haves

  • Apprentice: NACE CP1 (Cathodic Protection Tester) and NACE Corrosion Technician Certification.
  • Apprentice: Corrosion-related or electrical experience.
  • Apprentice: Electrical knowledge, including Ohm’s Law; proficiency with Pipeline Compliance System (PCS), field data loggers such as Allegro or MESA 3 Tablet, and Geographic Information System (GIS).
  • Technician I: NACE CP1 (Cathodic Protection Tester) and NACE Corrosion Technician Certification.
  • Technician I: Corrosion-related or electrical experience.
  • Technician I: Proficiency with Pipeline Compliance System (PCS), field data loggers such as Allegro or MESA 3 Tablet, and Geographic Information System (GIS).
  • Technician II: NACE CP2 (Cathodic Protection Tester) and NACE Corrosion Technologist Certification.
  • Technician II: Five years of pipeline cathodic protection or corrosion control experience.
  • Technician III: NACE CP3 (Cathodic Protection Technologist), NACE Senior Corrosion Technologist Certification, NACE CIP 1, or NACE PCS 1.
  • Technician III: Ten years of pipeline cathodic protection or corrosion control experience.

Responsibilities

  • Learn and perform basic, timely cathodic protection troubleshooting, or perform timely troubleshooting at technician levels.
  • Create remediation work orders for needs such as installing anodes, clearing shorts, installing insulators, and repairing or replacing test stations; follow up with other departments to ensure timely completion.
  • Troubleshoot and maintain rectifiers.
  • Maintain or calibrate half-cells in accordance with procedures.
  • Monitor corrosion control records and company-designated databases for compliance; generate reports as needed.
  • Provide guidance or assistance to apprentice, trainee, and lower-level technicians as appropriate to the role level.
  • Design cathodic protection systems at the intermediate level for Technician II and advanced level for Technician III.
  • Perform intermediate indirect surveys at Technician II, and perform and analyze indirect surveys at Technician III, including CIS, DCVG, ACVG, and ACCA.
  • Provide corrosion contractor oversight; at Technician III, provide schedule direction.
  • Conduct OQ evaluations of lower-level corrosion technicians at Technician III.
  • Provide support or inspection for cathodic protection needs on engineering and construction projects.
  • Provide corrosion-control-related support to internal departments or external contract support.
  • Enter new facilities and compliance data accurately and promptly into the appropriate system of record.
  • Participate in regulatory audits as needed to support compliance.
  • Complete the apprentice self-study workbook and company-designated apprentice training when hired at the apprentice level.
© 2026 Teal Labs, Inc
Privacy PolicyTerms of Service